MaxxTow Adjustable-Height Ball Mount Review Video

Both the shank portion and the ball mount portion of the MaxxTow Adjustable-Height Ball Mount #MT70068 measure 2- x 2-inches. I confirmed this by going to our warehouse and measuring both parts for you.

The MaxxTow Adjustable Ball Mount, Part #MT70068, has a distance from the center of the hitch pin hole to the upright of 8-1/8 inches. This part includes both a 1/2-inch pin and clip to secure the ball mount, and a 5/8-inch pin and clip to secure the…

The Curt T-Connector Vehicle Wiring Harness #C43FV is custom fit for your 2023 Hyundai Palisade. This uses the factory style connectors used on the tail lights for your Palisade so you will not have to splice any of your trailer wiring. It does…

The Curt Class III Trailer Hitch part #C13105 for the 2008 Toyota Sienna utilizes M12 bolts. It sounds like you have already tried to use a brush like part #814092 and Blaster Lubricant or WD-40. You can tap out the weldnuts with a M12x1.25mm tap…

Since tapping new threads can result in threads that are not cut straight I recommend taking some steps to clean out the weldnut on your 2002 Toyota Highlander before attempting to tap new threads. What you can do is use some spray lubricant like…

I would retap the threads with the next size up. Which from my research would be M12-1.5. If you are still unsure you can take the bolt you have with you to a hardware store, tell them you are in need of a tap that is the next size up, and they will…

It sounds like you have corrosion compacted in the weldnuts on your 2009 Toyota Sienna. All you can do is spray the lubricant, let it sit from about 15 minutes, and then go at the weldnuts with a wire brush. Do this repeatedly. If that doesn't…

To hook up a trailer jack to a 12 volt battery you need to make the connection from the jack's power wire to the positve post on the battery using a ring terminal, like part #DW05705-1. If you don't already have a battery on the trailer you…

You need to pick out a ball mount for your setup that will allow your trailer to sit as level as possible when towing. In order to determine the correct ball mount rise/drop you will want to check out the FAQ I attached to the right that details…

I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver, part #75772. This is a Class lll hitch and it has a 2-inch receiver. I have attached the installation instructions you can check out. The spare tire needs to be lowered or removed when…

We have hitches available for your 2017 Hyundai Santa Fe, but none of them really have a concealed hitch opening. The Draw Tite hitch part #75772 is a fit for your vehicle but the crosstube and hitch opening will be somewhat visible. I attached a…

In order to determine which trailer wiring harness you'll need, look under the vehicle just to the rear of the rear wheel on the driver's side of the vehicle. If you see the two connectors shown in the provided photo, use the Curt #C56332…