etrailer Trailer Hitch Installation - 2017 Toyota Sienna e98837 Video

When we installed the Draw Tite hitch part #76112 on a 2015 Toyota Sienna similar to your 2017 model we found that from the top of the hitch opening down to the ground it measured 12 inches. Since this is a 2 inch hitch that would put the ground…

Yes, the etrailer.com hitch part #E98853 that you referenced does fit your 2013 Toyota Sienna all wheel drive. I attached an install video for this hitch for more info for you to check out as well! Then for wiring the kit I recommend is the Tekonsha…

The benefit to a non-powered trailer wiring harness is that it's a bit easier to install since you don't have to run a wire up to the battery of the vehicle. The advantage to a powered kit is that it does a better job protecting the taillight…

You are correct that both the etrailer.com Class III Trailer Hitch #e98853 and the Draw-Tite Max-Frame #76112 feature the same hidden-crosstube design that allows only the 2" receiver to be seen on the vehicle. This is typically the style I…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The etrailer hitch part #e98853 is the best trailer hitch option for your 2017 Toyota Sienna as it's mostly hidden, has the best towing capacities, and has a matte finish which makes it a little less visible as well. I attached an install video…

Yes the etrailer hitch part #e98853 does fit your 2017 Toyota Sienna SE.

The trailer wiring harness I recommend for your 2015 Toyota Sienna SE AWD is the Tow Ready T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118498. This wiring harness installs in line with your vehicle's factory wiring behind the…

Upgrading the rear suspension in your 2017 Toyota Sienna sounds like a solid plan considering all the weight you are carrying around inside your van. Since you're using a Sienna as a platform you are going to be limited on options for upgrades.…

The MaxxTow Adjustable Ball Mount part #MT70068 does come with a pretty long shank. But the only real thing at risk will be your shins. The added length does put a bit more leverage on the hitch, but it does not negatively affect the capacity of the…

The Curt Class III Trailer Hitch part #C13105 for the 2008 Toyota Sienna utilizes M12 bolts. It sounds like you have already tried to use a brush like part #814092 and Blaster Lubricant or WD-40. You can tap out the weldnuts with a M12x1.25mm tap…

It sounds like you have corrosion compacted in the weldnuts on your 2009 Toyota Sienna. All you can do is spray the lubricant, let it sit from about 15 minutes, and then go at the weldnuts with a wire brush. Do this repeatedly. If that doesn't…