Jif Marine 2-Speed Boat Trailer Winch Review Video

The base on 2-Speed Boat Trailer Winch #315-W2500D measures 5-3/4 inches wide by 7-1/8 inches long. This is a very standard size and bolt pattern so it should fit on your trailer easily. I attached a review video for this for you to check out as…

I had the Fulton XLT 2-Speed Trailer Winch #F142425 measured and have a picture included with the corresponding measurements. Red: 2-3/4" Blue: 4-1/8" Green: 5-3/4" Pink: 6-7/8"

The base on 2-Speed Boat Trailer Winch #315-W2500D measures 5-3/4 inches wide by 7-1/8 inches long. I have included a picture showing this for you and a link to a video review on this winch.

The 2-Speed Boat Trailer Winch part #315-W3200D is an excellent upgraded 3,200 lb winch for a boat trailer. In regards to mounting, not all winches use the same pattern so you'd need to compare the dimensions in the photo below to what you…

I went out to our warehouse and measured the Single-Speed Boat Trailer Winch part #315-W2000D for you. The dimensions of the base are as follows; 6-1/4" long x 3-3/4" wide.

I pulled one of the Dutton-Lainson Hand Winches, part #Dl15440 from our warehouse and took the measurements you asked about. I have also attached a photo of the winch with the dimensions you can check out. This is a 3,200 lb 2-speed direct drive…

The size winch that you will need depends on a couple of different factors. I have included part of our hand winch FAQ below regarding boat winches and have linked the FAQ article for you to view. Finding the Right Capacity Winch for your Boat…

The overall width of the Dutton Lainson Winch, #DL14730, is 4-3/4 inches. The height from the bottom of the base to the top of the drum is 6-53/64 inches. And the length front to back is 6-1/4 inches, 8-27/32 inches including the drum.

I've attached two pictures of the bolt pattern of the Fulton Winch #F142401. One shows the size of each bolt hole and the other shows the distance between the holes.

We do not carry the Shelby winch line since they went out of business. We do have the Dutton-Lainson Hand Winch #DL15440. I have attached a photo that shows the mounting pattern for the winch you can check out. You can check the measurements to see…

I would be happy to help you determine which winch will replace your Shelby 5476 2800lb strap winch, but unfortunately since Shelby went out of business we do not have any way to determine its mounting hole pattern so you will need to measure the…

The replacement that I recommend for your Fulton T3205 is the 2-Speed Boat Trailer Winch with 20' Strap and Brake - 3,200 lbs #315-W3200D. This comes with a 20' strap and has a capacity of 3,200 lbs. I attached a review video of this winch…