Fulton XLT 2-Speed Trailer Winch with Heavy Duty Strap Review Video

The size winch that you will need depends on a couple of different factors. I have included part of our hand winch FAQ below regarding boat winches and have linked the FAQ article for you to view. Finding the Right Capacity Winch for your Boat…

I reached out to my contact at Dutton-Lainson and the Dutton-Lainson Covered Hand Winch - 2 Speed - Freewheel - 25' Strap - 2,600 lbs #DL17085 will mount the same as your current DL1802A #DL14627. With that said the #DL17085 will be about…

Yes, the strap on the #315-W3200D can be installed so that it comes from the bottom instead of the top. However, doing so will reverse the switch and the direction you turn the handle for operation. The self-locking mechanism will work either way.…

Assuming your tires are in good shape without any bulges the easiest way to determine if you have a bent spindle is to take a straight edge that is longer than the tire and lay it across the tire parallel with your trailer frame and then measure the…

You can convert a single axle trailer to a tandem axle but it's more extensive than just putting the extra axle on there. The current axle does need to be repositioned for proper tongue weight. You will also need to cut off the current hangers…

The Fulton mount #F500276 hole to hole length center on center is 5-1/2 inches and the hole to hole width center on center is 4-1/2 inches. The overall is 6 by 5 inches. The bolts included are 7/8" with threads that are 16 course.

The weld-on mounting plate for the Fulton F2 Swing Up Jacks is part #F500277 and this plate's jack mounting holes are spaced at 4-1/2 inches horizontally and 3-7/8-inches vertically as shown in the linked photo. Feel free to submit a picture of…

Fulton marine jacks mount to a bracket that has holes that are 3 inches apart on center, the Jack Mounting Bracket for Fulton Marine Jack - Weld-On #P9012-00. There isn't going to be a way to mount a Fulton jack to a bracket with different…

If you measure the distance between the mounting holes on the bracket you have on your trailer, and they do not match the mounting holes on your F2 jack you may need to have the old bracket removed and use a mounting bracket like part #F500277 for…

I wish we had an adapter that woudl let you use the Fulton F2 Swing-Up Trailer Jack, PART #F1413100334 with the 5 x 4 mounting plate on your trailer but we do not have any available. You will need to either have the plate you have cut off and…

Generally when picking out a winch for a boat trailer the ratio is 2 to 1 meaning you would need a winch with roughly half the capacity as the weight of the boat. With good rollers and a short winching distance the ratio increases to 3 to 1, but with…

I had the Fulton XLT 2-Speed Trailer Winch #F142425 measured and have a picture included with the corresponding measurements. Red: 2-3/4" Blue: 4-1/8" Green: 5-3/4" Pink: 6-7/8"