Americana Tires and Wheels AM90049 Review Video

The DeeMaxx Trailer Wheel Lug Nut #DE93GR that you were looking at are chrome, not stainless steel. For a comparable lug nut in stainless steel, you will need the Kodiak Trailer Wheel Lug Nut #KALN1375S.

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

The Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel #AM22327 has a 0 offset and has a 14 inch diameter and is 5-1/2 wide. This wheel has a weight capacity of 1,900 pounds. If you have any further questions please feel free to reach back out to me…

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

According to Dexter your axle uses a 10-19 grease seal which would be the #58846. If you need a pair you can use part #RG06-050.

The DeeMaxx Trailer Wheel Lug Nut #DE93GR is 1.4" in length.

The width of a trailer wheel is measured from the inner edge of a bead to the inner edge of the other bead. If you take this measurement it should be 5 inches on your wheel. Take a look at the video I have linked that shows how to measure. You can…

The torque for the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility #8-174-5UC3 is not specified by the manufacturer. For 9/16 inch studs, the typical lug nut torque will be 120-140 ft lbs based on most…

I'm not familiar with a JK42 bolt pattern, nor could I find any information about it online. Your 5 lug wheels could have one of 4 different bolt patterns, 5 on 4-1/2, 5 on 4-3/4, 5 on 5 or 5 on 5-1/2, with 5 on 4-1/2 being the most common.…

The trailer hub part #84550BX has a 5 on 5 inch bolt pattern, for a hub that would fit the same spindle that has the 5 on 4-1/2 inch bolt pattern you would want the part #84545BX. See review video. I attached a page that has all of the trailer rims…

To ensure that you get the correct hub assembly and bearings that will be compatible with your newly acquired trailer axle and spindle, you will need to locate or determine the bearing numbers. The easiest and most accurate way to do this is to…

Yes, the Kenda Karrier ST175/80R13 Radial Trailer Tire #AM31990 will indeed fit on the etrailer Hitch Mounted Spare Tire Carrier #e98ZR. The spare tire carrier will work with virtually any 4 lug, 5 lug or 6 lug wheel. The #AM31990 wheel uses the…