Fulton Trailer Winch - Standard Hand Winch - F142425 Review Video

The top cover of the Fulton XLT part #F142425 just pulls right off to give you access to the mounting holes that you'd run the install hardware through.

I had the Fulton XLT 2-Speed Trailer Winch #F142425 measured and have a picture included with the corresponding measurements. Red: 2-3/4" Blue: 4-1/8" Green: 5-3/4" Pink: 6-7/8"

The size winch that you will need depends on a couple of different factors. I have included part of our hand winch FAQ below regarding boat winches and have linked the FAQ article for you to view. Finding the Right Capacity Winch for your Boat…

The base on 2-Speed Boat Trailer Winch #315-W2500D measures 5-3/4 inches wide by 7-1/8 inches long. This is a very standard size and bolt pattern so it should fit on your trailer easily. I attached a review video for this for you to check out as…

I had our warehouse measure the Fulton XLT 2-Speed Trailer Winch #F142425 you were looking at and the widest part of the plastic body measures 7" as shown in the included diagram. Now this is not the widest part of the winch, as from the handle…

There are two schools of thought when it comes to determining the correct sized winch for a boat. The first being that the winch should be able to handle 3/4th of the total combined weight of the boat along with the motor, fuel and gear. The second…

Yes, the strap on the #315-W3200D can be installed so that it comes from the bottom instead of the top. However, doing so will reverse the switch and the direction you turn the handle for operation. The self-locking mechanism will work either way.…

Generally when picking out a winch for a boat trailer the ratio is 2 to 1 meaning you would need a winch with roughly half the capacity as the weight of the boat. With good rollers and a short winching distance the ratio increases to 3 to 1, but with…

This winch does not come with the mounting hardware but 3/8 inch diameter Grade 5 or higher hardware would be what you need to mount the Fulton XLT winch part #F142425. 3 bolts will be all you need and if you took the cover off you will be able to…

Generally when picking out a winch for a boat trailer the ratio is 2 to 1 meaning you would need a winch with roughly half the capacity as the weight of the boat. With good rollers and a short winching distance the ratio increases to 3 to 1, but with…

The base on 2-Speed Boat Trailer Winch #315-W2500D measures 5-3/4 inches wide by 7-1/8 inches long. I have included a picture showing this for you and a link to a video review on this winch.

The 2-Speed Boat Trailer Winch part #315-W3200D would be an excellent option to replace a Valley Industries 2-Speed 2,800 lb Winch. It will hold a slightly higher weight capacity at 3,200 lbs and retains the two speed operation. It also comes with an…