Curt Trailer Hitch Ball Mount Review C45070 Video

Yes Tracy, the Curt Rockerball part #C40047 does fit the Curt aluminum ball mount part #C45293 that you referenced.

The ideal height will actually have to do with how tall the coupler of the trailer is from the ground. The Draw-Tite #76020 will sit at 13 1/2 inches from the ground to the top of the hitch when installed on a 2016 Mazda CX-9. From what I could find…

This will depend on the hitch used and the height of the trailer coupler. You want the trailer to be as level as possible. We have a page on calculating hitch height and coupler height to help you find what ball mount would work best. Most light duty…

I attached an FAQ that details how to pick out the correct ball mount. Picking out the correct ball mount will allow your trailer to sit as level as possible. Basically you will first measure the height from the ground to the top of the receiver…

The ball measures 2-3/4 inches from the ball mount surface to the top of the ball. I am glad to see that you are making sure you get the proper ball mount for your tow set up. The rule of thumb is to be no more than 2 inches over or under. The…

For a 2-inch ball mount that provides at least 7500-lb capacity along with your required minimum rise of 4-1/4-inches I suggest the Curt forged ball mount #C45342 rated for 17K or part #C45336 rated for 10K. These and other ball mounts are shown on…

Yes, you can use the interchangeable ball set #105TB in a 1-1/4 inch ball hole by using a bushing such as #58184 or #F-2.

The Draw-Tite #2753 will give you just shy of 3 inches of rise. The next step up from that as far as rise goes would be the Curt #D-28 which would give you 4 inches. You'd also need a #PC3 hitch pin. For almost 5 inches of rise, use the Draw-Tite…

To tow a smaller trailer with the 2015 Honda Odyssey you will need a hitch, lock, ball mount, ball and wiring. If the trailer has electric brakes, you will also need a 7-Way plug on the vehicle and a brake controller. I recommend to use the Draw-Tite…

Yes, the Curt ball mount part #D-28 is made in the USA. The part #C45070 is a very similar ball mount that is much shorter but has same rise/drop.

For a ball mount that will give you the proper rise or drop use the Flint Hill Goods Adjustable Steel Ball Mount Kit w 2 Hitch Balls #FHG79ZR. U-Haul trailers have a standard coupler height of 18 inches so this adjustable ball mount will allow you to…

The Curt Rockerball Shock Absorbing Hitch Ball has anti-Rotation Plate that is not compatible with all hitch mounts. This hitch ball is recommended to be mounted onto standard ball mounts not shock absorbing ones. I recommend the Curt RockerBall…