Brophy Swiveling D-Ring Anchor with Backing Plate and Hardware Review and Installation Video

The Brophy Swiveling D-Ring Anchors w Backing Plates and Hardware #RR6K-4 uses grade 5 hardware for attaching to your trailer. The included parts and hardware are all Zinc coated for corrosion resistance. The 16 bolts themselves are 5/16"…

The Brophy Swiveling D-Ring Anchors with Backing Plates and Hardware part #RR6K-4 no longer comes with hex bolts. Instead, it comes with carriage bolts now which makes for a smoother surface once finished.

From my research on the Harbor Freight 4x8 folding trailer uses 4.80-12 tires on a 12 inch wheel for the 1195 lb capacity trailer and a 5.30-12 for the 1720 lbs capacity trailer. It is a good idea to check your existing tires to see which size they…

The speed rating for the Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel #AM30861 that you referenced is 65 MPH.

Typically 4-way wiring consists of 18 and 16 gauge wires. For a 4-way that has all 16 gauge wire you would want the Wesbar 4-Pole Flat Connector #W787264. The part #HM38138 uses 18 gauge for all wires but the white that uses 16 gauge.

The safest way to secure a 4-wheeled vehicle like a golf cart in a truck bed is to use wheel nets that secure to the truck bed in some manner. The Erickson E-Track Tie-Down Kit #EM09160 is one option that is similar to the Pack 'Em kit you…

The MORryde X-Factor Crossmember for CRE, SRE, or Stock Leaf Spring Suspension #MR33WR includes one adjustable crossmember. Your existing hardware will be too short due to the extra thickness of the crossmember, so you will need to add #MR58ZR if…

You will use metal screws to install the etrailer Horizontal E-Track #e42VR. You'll also need backing plates to install this e-track and the mounting hardware is actually included with the etrailer E-Track Backing Plates with Hardware #e76YR. The…

There really isn't a profile difference between the tapered style of Tow Rax L-Track like the part #TWSP12TAB and the low profile #TWSP72TA. The low profile does sit a little taller at 1/2 inch tall whereas the tapered is 7/16 inch. That's a…

You are correct. You will want to use the backing plate to sandwich the boards and provide the most secure connection when installing the Brophy Swiveling D-Ring Anchors #RR6K-4 . You can mount these in a recessed hole created by a router or punch…

For a 4,000 lb car the Brophy Swiveling D-Ring Anchor w Backing Plate and Hardware #RR6K that you referenced would work well. These have a 2,000 lb working load limit and if you used 4 of these (one on each corner of the vehicle) you'd be good.…

I contacted Torklift on your 2013 GMC Sierra 2500HD with the upgraded 2-1/2" receiver. They confirmed that Item #TLC3212 is compatible.