Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Recessed design lets you roll cargo over the D-ring without interference. WLL is 400 lbs.
Features:
Specs:
Note: Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
Average Customer Rating: 4.7 out of 5 stars (82 Customer Reviews)
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Recessed design lets you roll cargo over the D-ring without interference. WLL is 400 lbs.
My run-of-the-mill utility trailer is now the envy of all my friends. It is customized for my frequent trips to the ATV trails, but the strategically placed tie downs offer flexibility for just about any load I need to haul. Thanks for the honest reviews and great products!
I am very happy with the Brophy D-Ring Tie Down Anchors.
Tie-down is tamped with 1,200Lb rating. I would not suggest that, and have seen similar tie-down listed with a 500Lb rating when installed in other applications. I am replacing mine due to rivets failing on lower side from corrosion/weakness that is prone in this area. The D-ring support strap seems to hold water in cup from drain hole. Web picture does not illustrate this very well, nor is it the exact same receptacle purchased. The receptacles i received are the exact same tie-downs that I’m replacing (see attached picture). Take note that the 2 main bolt holes lengthwise make it prone to tip/twist with side loads applied under stress. Use caution for heavier tugging loads on this type of tie-down.
Good price for a "light duty tie-down".
Easy installation, 3" hole drilled! I had my brother in law make some backing plates that I painted. These will work great to hold our ATV's down!
Used some 5/16" stainless bolts with nylock stainless nuts and zink coated washers to complete. I may end up bolting the middle as well, but I figured I would keep that open for water drainage.
I transport motorcycles on my 30' flatbed trailer and use these to secure them to the deck. They recess into the wood deck easily which keeps you from tripping on them when walking on the deck. Many times I will have 3 or 4 tie-downs attached to them from different angles and they hold together just fine. The D-Rings are large enough to handle multiple hooks, and strong enough to stay attached to the remaining bracket. The "hot ticket" for recessed attachment!
Dave
3/6/2021
Overall, theyve worked out pretty well, however, Ive had 1 of 2 where the D-ring has pulled out of the base plate, probably due to being over-stressed from multiple hooks pulling on it beyond its ability.
This product was excellent for my application. I did not want to spend a lot more money for extended strength that I did not require. This product was not only strong enough but provided the flush mount that I was wanting. They are installed in my covered snowmobile trailer.
Jd
4/11/2020
These tie down anchors are still doing the great job that I expected.
The trailer door hinges and latch system have been on my custom trailer for well over a year and a half. They function great and still look like new. Great products and would certainly buy them again. Also the shipment and correctness of the order was perfect. My follow up orders of several accessories were also handled in a totally professional way and the products were equally high quality.
The parts were a perfect match to the original ones. Thank you so much.
This is my second order from ETRAILER.COM. Both transactions went very smooth. They had an odd size axle shaft that I couldn't find locally on my previous order so I tried them again for the tie-downs that I needed. Priced well and shipped fast.
Great Job!
I am rebuilding a trailer that was built at home with my dad and brother who have now passed. I am dedicated to do the very best on this 42 year old trailer and choosing etrailer has been a great asset. All the products are exelent quality, the prices are fair,the delivery was very fast and well packaged. My project is almost finished and the strong old trailer is better than ever. Thanks for your help etrailer. Vince in MO
The tie downs have performed as expected. Because they are flush mount installation was somewhat more difficult than surface mount would have been but worth the effort. I can transport flat sheets without damage. Loading is also a snap. Nobody should be disapointed with purchase of these.
Fit perfect. Replacing the old ones in my Hallmark snowmobile trailer. Can not for the life of me understand why a manufacturer uses zinc coated tie downs but they did. Wish this maker would make these out of stainless steel. Oh well, these should last just as long as the OE ONES. LOOKS TO BE THE SAME MAKER. Note to anyone buying or looking for a snowmobile trailer. Pay the extra $ for the stainless option for outside latches and fasteners. Well worth the $ money for all the salt and crap the trailers go through.
During the process of rebuilding a small ATV trailer,I wanted to add a few more tie-downs than it originally came with. These ended up being a perfect match to what it had. And for the price I decided to not just add the 4 more, but to replace the original 4 as well so they all looked good.
Had trouble getting a forstner bit that big to not "walk" on me. Ended up using a hole saw and going all the way through and then reinforcing with steel underneath.
Still going strong. Used for indoor box trailer. No rust out over used rivet attachment
There are a few different manufacturers of this style rope ring. I purchased this one because the metal strip that retains the D-ring extends to the mounting holes so it isn't completely relying on the rivets for strength. This part is built poorly with cheap stampings. The D-ring hangs up in the pocket and will not freely fall flat when not it use. It binds and protrudes from the pocket unless messed with to get it to lay flat.
Fit like should thank you thank you for the email I found them in a shrub next to the mailbox
Great product at a great price and it got here quick! Whats not to love about that!? Well done etrailer.com!
Received tie downs , will work great in my enclosed trailer,great service
Excellent customer services and a delivery service that is top notch. I will definitely continue to order all my Trailer needs from etrailer.
best part for my trailer, very solid , easy to install bought 5 more thanks
Will have to use 3" hole saw to flush mount.
Great price point. Had a higher load rating than the ones they were replacing.
Anchors were exactly what I needed for my trailer. Thank you!
A great floor anchor.
Do you have a question about this Tie Down Anchor?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chris H.
10/31/2017
Although I must frequently chip through mud from my ATV, the tie downs still hold tight. I appreciate theyre not rusting despite being installed and used for several years now.