Brophy Swiveling D-Ring Anchor with Backing Plate and Hardware Installation - Enclosed Trailer Video

Yes, for the Brophy Swiveling D-Ring Tie Down Anchor #RR06 there are backing plates available by themselves, with the correct part being the following: - Backing Plate for RR06 Recessed Swivel D-Ring Tie Down #BP06

The Brophy D-Ring Tie Down Anchor - Bolt-On - 3-1/2" Wide - Surface Mount - 1,600 lbs #SR15-C are steel anchors with a zinc finish. Although the zinc finish will help avoid galvanic corrosion from dissimilar metals, the connection by…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

90-120 ft lbs of torque is probably about right for your trailer rims. If you check out the lug nut torque chart that I attached you will see that nearly all of the torque specs are that and higher.

I have attached a chart you can check out that describes the torque needed per wheel size, wheel stud size and material. For an 8-inch wheel with a 1/2-inch wheel stud the torque is 75 to 86 ft-lbs. For a 15 inch steel wheel with 1/2 inch wheel…

You are correct. You will want to use the backing plate to sandwich the boards and provide the most secure connection when installing the Brophy Swiveling D-Ring Anchors #RR6K-4 . You can mount these in a recessed hole created by a router or punch…

The Brophy Swiveling D-Ring Anchors w Backing Plates and Hardware - Bolt-On - 2,000 lbs - Qty 4 Item #RR6K-4 comes with hex bolts like you can see in the attached picture. I was not able to find an reference from us to it coming with carriage bolts.

Both the MORryde Rubber Equalizers #MR87ZR and Dexter E-Z Flex Suspension Kit #K71-652-00 are achieving the same result. They are doing so with slightly different designs but end up with the same result. I recommend using the Dexter E-Z Flex…

The Brophy Swiveling D-Ring Anchors with Backing Plates and Hardware part #RR6K-4 no longer comes with hex bolts. Instead, it comes with carriage bolts now which makes for a smoother surface once finished.

I believe I have just the right license plate bracket for you. Take a look at the Trailer License Plate Mount Bracket, #LP15SB. It is just a little over 8 inches long at 8-7/16 inches. It is 4 inches tall. The center to center distance between the…

The CargoSmart Horizontal or Vertical X-Track - Matte Black - Steel - 667 lbs - 5' Long #3481788 will attach directly to the vertical metal frame on your trailer. You will use Self-Tapping Screw - 1/4" -14 x 3/4" Long -…

The safest way to secure a 4-wheeled vehicle like a golf cart in a truck bed is to use wheel nets that secure to the truck bed in some manner. The Erickson E-Track Tie-Down Kit #EM09160 is one option that is similar to the Pack 'Em kit you…