Tow-Rax Propane Bottle Rack Review Video

The Traffic Cone Holder, #RA-26, that you mentioned is designed to store cones that are 12" - 36" tall, and the arm of the holder is 22-3/8" long. The arm does not fold down a full 90 degrees, so this would not be the best option for…

I went out to the warehouse and pulled the Tow-Rax 2-Cup Drink Holder, part #TWSP2CH, and took some measurements for you, which you can also see on the included image. The thickness of the material is 2.62 mm. The cup holder is 8" long x 4"…

I went out to the warehouse to measure the distance between the mounting holes of the Redline Locking "L" Style Door Handle #276 and found it was approximately 1-1/2 inches.

So long as the trailer hitch on your tow vehicle - in your case the Cayenne - is rated for weight distribution the tow vehicle won't matter for the weight distribution hitch. In order to choose the best weight distribution system you will first…

I might have an idea worth considering, but unfortunately I'm not aware of a product like what you are describing. It sounds like a cool idea though. I can't take full credit for this idea because I saw it on an overlanding blog, but he took…

The etrailer Trailer Tongue Weight Scale, part #e99044 is the only tongue weight scale we offer. This scale has an easy-to-read gauge that shows the weight in both pounds and kilograms and has a capacity of 2,000 lbs. I have attached a product review…

Having an air bubble in the gauge of the etrailer Tongue weight scale part #e99044 is normal and not a cause for concern.

I may have a solution for you, but there isn't a smaller tongue weight scale available with a lower capacity. The only scale that we currently offer is the etrailer Tongue Weight Scale for Campers and Utility Trailers #e99044 with the - 2,000-lb…

I can help you determine the tongue weight of your trailer with the Hensley Hitch and Stinger attached. I would recommend you place the etrailer #e99044 scale under the jack foot to measure your tongue weight. You will want to make sure the trailer…

The Lippert Tailgate Storage System Mounting Kit part #LC432336 attaches to the frame which you can see below. Therefore, so long as the wall does not extend past the frame rails too much it should work. The included diagrams below should help to…

Since it looks like you have C-channel on your 2021 Winnebago Micro Minnie FBS Comfort Explorer you'd have to find a welder to box the frame so that you can then install the Mount-n-Lock SafetyStruts #MO22FR that you referenced but it can fit.

I spoke with my contact at Husky Liners and she confirmed that the floor mats they have are only for 2009 Pontiac Vibe with automatic transmission. I did give my contact at WeatherTech a call and he said they have some mats that are a confirmed fit…