Review of JR Products Enclosed Trailer Parts - Hook and Keeper - 37210525 Video

The Loadstar ST205/75D15 Bias Trailer Tire w/ 15" Black Mod Wheel #AM3S664DX needs to be inflated to it's max psi rating of 50 psi when cold. If you use lower psi you'd lower the weight capacity of the tire and cause heat to build up…

I reached out to my contact at Demco and was able to confirm that the best baseplate kit option for your 2019 GMC Sierra 1500 is the Demco Tabless Base Plate Kit - Removable Arms #DM29FR (Demco part number 9519345). While the #9519342 will fit both…

Yes, we do offer replacement lid and seat options for the Dometic 310 Model Part-Timer RV Toilets, the Replacement Wooden Toilet Seat with Slow Close Lid for Dometic Part-Timer RV Toilets part #DOM23FR for tan or part #DOM83FR for white.

For your 2012 Ford F-150 I recommend replacing your Timbrens with the SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-117-47 which have a 1500lb load rating. The Timbrens are known for causing a rougher ride unloaded, where the SumoSprings…

Yes the Magnetic Door Holder part #OBE37FR that you referenced will work great for what you are looking for. This would work with the door stop you have now that is magnetic or could be used to replace what you have all together as well.

The distance the Magnetic Door Holder for RV Doors #OBE37FR the hold the door from the wall is 3-3/8 inches like you can see in the picture I attached.

While the steel T-Style Hook and Keeper Door Holder #37210525 is stronger and won't pop off or break as easily as the plastic T-Style Hook and Keeper Door Holder #37210444, you do stand a better chance of damaging your door and trailer with the…

For DC electricity, I can help you out. You can run a 10 gauge wire like #10-1-1 sold by the foot from a 6-way or 7-way connection from the 12V to a deep cycle 12V battery and then run the battery to a ground on the trailer. You can use a solenoid…

Installing the E-Track system to your enclosed trailers upright frame is a good idea for the strongest mounting location and cutting the plywood out to fit around the E-Track would not be an issue that I can see as long as the plywood sides have…

There isn't a specific height from the trailer floor recommended to mount the E-Track. My gut feeling is that if 3 feet is too low and 4 feet is too high then 3-1/2 feet might be perfect. Another option is to mount E-track pieces vertically along…

Yes, the Rubber Trim for RVs, Boats, and Utility Vehicle Trim Molding #SR86ZR only comes in black, however this is 15' and it is offered in a longer 30' length should you be interested: -Rubber Trim for RVs, Boats, and Utility Vehicle Trim…

I spoke with my contact at Valterra and the distance between the mounting holes of the Valterra Universal Barbed Drain Valve #A01-2025VP is 1.45 inches. This is the same for the black version part #37204-62415.