Torque Settings For Wheel Lug Nuts For Boat Trailer And utility Trailer
Question:
I have small boat trailer and the wheel/tire set I have is a 480-8 with 1/2 lug nuts on a 4x4 bolt pattern with a steel rim. How much torque do I need? I also have a 5X8 utility trailer with ST205/75R/15 tire wheel/tire the rim is 6inch wide steel rim. With a 5 on 4.5 bolt pattern on 1/2 studs. How much torque do I need?
asked by: David
Helpful Expert Reply:
I have attached a chart you can check out that describes the torque needed per wheel size, wheel stud size and material.
For an 8-inch wheel with a 1/2-inch wheel stud the torque is 75 to 86 ft-lbs.
For a 15 inch steel wheel with 1/2 inch wheel studs the torque is 90 to 120 ft-lbs and if you have an aluminum wheel the torque needed is 90 to 100 ft-lbs.
If you do not have a torque wrench I recommend the Powerbuilt Dual Drive Torque Wrench, part # ALL944001. This has 3/8 and 1/2 inch drive and will measure torque readings between 10 and 150 lbs.
Products Referenced in This Question
Powerbuilt Dual Drive Torque Wrench - 3/8" and 1/2" - 10 to 150 ft-lb
- Automotive Tools
- Wrenches
- Torque Wrench
- 150 ft/lbs
- 1/2 Inch Drive
- 3/8 Inch Drive
- Powerbuilt
more information >
Product Page this Question was Asked From
Powerbuilt Dual Drive Torque Wrench - 3/8" and 1/2" - 10 to 150 ft-lb
- Automotive Tools
- Wrenches
- Torque Wrench
- 150 ft/lbs
- 1/2 Inch Drive
- 3/8 Inch Drive
- Powerbuilt
more information >
Continue Researching
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Do Free Backing Brake Assemblies Still Require Use of Manual Lock Out on Actuator
- Shop: TorkLift GlowStep Camper Scissor Steps - 4 Steps - Aluminum - 18" Wide - 375 lbs
- Shop: Trailer Hitch
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Video: Review of TorkLift RV and Camper Steps - Truck Camper Steps 3 Step - TLA7503
- Article: Most Popular Wheel Bearings
- Shop: Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Q&A: coupler
- Q&A: Torque Specs for a 13 Inch Boat Trailer Wheel
- Shop: Trailer Wiring
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Brophy Camper Scissor Steps - 4 Steps - Aluminum - Non-Slip Tread - 24" Wide - 300 lbs
- Q&A: Torque Specification for 12 Inch Wheel with 4 Lug Nuts on Boat Trailer
- Search Results: st175/80d13
- Search Results: st175/80r13
- Search Results: boat seat
- Article: Trailer Tire Sizing
- Video: Brophy RV and Camper Steps - Truck Camper - AS24 Review
- Search Results: am31242
- Q&A: Lug Nut Torque for a Trailer Wheel
- Q&A: How to Install the Brophy Camper Scissor Steps Part # AS24 on a Palomino Truck Bed Camper
- Video: Review of Dexter Trailer Leaf Spring Suspension - Equalizer Upgrade Kit - K71-652-00
- Search Results: lugs
- Video: Review of Demco Brake Actuator - 8K Surge Brake Actuator - DM8609101
- Search Results: lug nut
- Article: How to Measure the Bolt Pattern of a Trailer Wheel
- Search Results: trailer tires wheels