Customers compare F1413040134 to these similar products
Products Featured in this Video
Today on our utility trailer well be installing the Fulton F2 Swing-Up wide track trailer jack with an eight inch single wheel, bolt-on style with a 1,600 pound weight capacity, part number F1413040134. As you will see here, it comes with two different size brackets or u-bolts that can be used to mount the trailer jack to the tongue of the trailer. Now on our particular trailer that well be… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The 'sleeve' or shank portion of the Fulton #F500266 caster assembly is meant to be compatible with Fulton F2 trailer jacks, which is why it's kind of oddly shaped. At the widest point, that sleeve is 2-1/2 inches in diameter,…
view full answer...The use of Lock N Roll Articulating Trailer Hitch for 2" Receivers #336VS501 does not add sway to the setup. Couplers normally can articulate to the left and right like what this allows so it would not be any more prone to sway than a ball…
view full answer...The eZ-Latch on the Demco Channel Tongue Trailer Coupler #DM13689-52 does make it easier to connect the trailer and ensure the coupler latches down fully than your trigger style coupler. Since you can visibly see the latch raise and drop you know…
view full answer...Yes, since your current Fulton jack is a bolt-thru style, you can use the Fulton XLT Bolt-Thru Swivel Trailer Jack #F26ZR with your current welded on bracket. You just need to remove the jack from the included bolt-on bracket and mount it to your…
view full answer...I wish we had an adapter that woudl let you use the Fulton F2 Swing-Up Trailer Jack, PART #F1413100334 with the 5 x 4 mounting plate on your trailer but we do not have any available. You will need to either have the plate you have cut off and…
view full answer...The weld-on mounting plate for the Fulton F2 Swing Up Jacks is part #F500277 and this plate's jack mounting holes are spaced at 4-1/2 inches horizontally and 3-7/8-inches vertically as shown in the linked photo. Feel free to submit a picture…
view full answer...If you measure the distance between the mounting holes on the bracket you have on your trailer, and they do not match the mounting holes on your F2 jack you may need to have the old bracket removed and use a mounting bracket like part #F500277 for…
view full answer...Fulton marine jacks mount to a bracket that has holes that are 3 inches apart on center, the Jack Mounting Bracket for Fulton Marine Jack - Weld-On #P9012-00. There isn't going to be a way to mount a Fulton jack to a bracket with different…
view full answer...The Fulton mount #F500276 hole to hole length center on center is 5-1/2 inches and the hole to hole width center on center is 4-1/2 inches. The overall is 6 by 5 inches. The bolts included are 7/8" with threads that are 16 course.
view full answer...I reached out to my contact at Dutton-Lainson and the Dutton-Lainson Covered Hand Winch - 2 Speed - Freewheel - 25' Strap - 2,600 lbs #DL17085 will mount the same as your current DL1802A #DL14627. With that said the #DL17085 will be about…
view full answer...I am certainly glad you are taking safety into consideration when trying to choose your coupler, although none of the Demco couplers would be considered "safer" than the others you mentioned. Among the Demco Channel Tongue Trailer Coupler -…
view full answer...The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
view full answer...