Fulton F2 Swing-Up Trailer Jack for 4 - 5 Frames - 8" Wide-Track Wheel - Bolt On - 1,600 lbs
(496 reviews)
Price: $227.11
Fulton F2 Swing-Up Trailer Jack for 4 - 5 Frames - 8" Wide-Track Wheel - Bolt On - 1,600 lbs
Retail:$314.86
Our Price: $227.11
You Save: $87.75
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (496)
- Q & A (0)
- Photos
Fulton Trailer Jack
- Boat Trailer
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- Bolt-On
- Leveling Jacks
- Tongue Jacks
- 10 Inch Lift
- With Wheel
- Alloy Aluminum
- Fulton
Maintenance-free, corrosion-resistant jack is made for marine, recreational and utility trailers. Features aluminum alloy construction, adjustable mount and swivel system and wide-track wheels for superior stability.
Features:
- Adjustable mount and swivel system for easy lifting and transport
- Can be adjusted to any height for mounting
- Swivels into position simply with the integrated, easy-to-grip pull pin
- Maintenance-free construction
- Lubricated, 1-piece gearbox eliminates the need for manual lubrication
- Ventilation port allows you to add extra grease if desired
- Wide wheel base allows for increased stability
- Anodized finish on inner and outer aluminum alloy tubes prevents rust even in the harshest environment
- Sidewind handle is made of strong plastic for durability and ease of use
- Optional wheel wedge (sold separately - F500133) eliminates the need for a chock
- Bolt-on mounting hardware included
Specs:
- Application: 4" - 5" trailer tongue
- Lift height: 10"
- Extended height: 19-3/4" from bottom of wheel to bottom of outer tube
- Retracted height: 9-3/4" from bottom of wheel to bottom of outer tube
- Bracket range of adjustability: 8"
- Wheel diameter: 8"
- Mounting holes measure 4-1/2" x 5-1/2" on bolt hole centers
- Pull pin diameter: 9/16"
- Capacity: 1,600 lbs
- Lifetime limited warranty
How to Determine the Lift Capacity You Need in a Jack
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Trailer and Camper Jack Lift
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
1413140334 Fulton F2 Marine and Recreational Jack for 4" - 5" Frames, Sidewind, Wide Track, 1,600 lbs
Item # F1413140334
Installation Details
California residents: click here
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Arrived Damaged
Customer Reviews
Fulton F2 Swing-Up Trailer Jack for 4 - 5 Frames - 8" Wide-Track Wheel - Bolt On - 1,600 lbs - F1413140334
Average Customer Rating: 4.8 out of 5 stars (496 Customer Reviews)
Maintenance-free, corrosion-resistant jack is made for marine, recreational and utility trailers. Features aluminum alloy construction, adjustable mount and swivel system and wide-track wheels for superior stability.by: Chris04/22/2024
Description of the product was very good. Product quality is very good. This jack was easy to install
by: Joe M.02/24/2017
Installed today to replace the original on my Ranger RT188 trailer. A much more substantial and quality jack than the original. Did need to use longer bolts on the welded frame plate but very happy with the Fulton. Next upgrade will be the Fulton enclosed winch. Thanks Etrailer for a quality product and quick shipping.
by: John02/07/2024
All products were exactly as described. Shipping was fast.
by: Billk05/15/2019
etrailer offered accurate specs and good selection. Jack was delivered fast and fits Ranger RT188 trailer. Well built, easy to install. Great product.
by: Ken P02/26/2020
Fits perfectly on my 2015 Ranger RT188 trailer. Much better than the one that originally came with the trailer.
by: John 01/31/2024
Exactly as dedscribed!
by: Jackson05/30/2020
Overall I've been quite happy with this trailer jack. The adjustability is what had me sold - I was able to set it at the perfect height to get my trailer on the hitch, whereas with the old unit I had to jack up the trailer slightly, or run a really high ball height. Two minor niggles with the unit are that the handle holder slips off when driving, and that the optional wedge kit doesn't hold the trailer very well. I'd give it a 4.5 overall.
by: Frank12/14/2022
My Fulton jack lasted less than a year and quit working. It would not go up or down granted I use it in salt water however it should last more than a year at over $XXX. I was forced to replace it again with the same jack because it is custom fitted to my Skeeter trailer.
by: John02/12/2018
This jack is sturdier than the one that came with my boat trailer. If you need to move your trailer in close quarters, I would wholeheartedly recommend this jack. The wide wheel makes turning a breeze. And the gear ratio of the crank makes cranking the trailer up or down a simple chore.
John
5/5/2019
The trailer jack is working out fine. However, since the boat and trailer are kept outside there is a little rust forming. It doesnt compromise the function its a cosmetic issue. Other than that it does what it was made to do which is a sturdier trailer jack.
by: Andrew06/14/2023
This comes with a different ubolt then other f2’s I have bought and it does not come in original box. Makes we question of these are rebuilt or fakes.
Jenny N.
6/15/2023
The Fulton jacks that we carry are from Fulton. This jack works with frames that are 4 to 5 inches and the u bolts will be a little bigger. Sometimes the boxes from the manufacturer end up in rough shape and the jacks needs to be repackaged. If there is any damage please let us know.
by: Marcus W.06/06/2020
I bought this so I could strap launch my sailboat off a ramp. The boat weighs and trailer weigh 8500 lbs together so there's about 900 lbs on the tongue and I needed a super strong jack to support that while we rolled it down the ramp and this jack does a great job with that. The way I use this wheel is probably harder on it than how most people use it and I haven't had a problem. I would buy it again. Video of our launch procedures can be found
by: Stuart04/14/2018
We bought two of these heavy trailer jack wheels. I am a service plumber & contractor. The tongue weight of the trailer is heavy, especially if it is loaded with tools, lumber or snakes & sewer equipment. These units are well built and do an outstanding job of keeping the load off of our employee's backs while making it easy to hitch, unhitch & roll the trailer around on our black top driveway.
by: Abert09/30/2014
Great Trailer Jack's, the Fulton F2 series. I installed this one on my boat trailer. It was a direct replacement. Unbolted the old one and with the supplied "u" bolts the project took 5 minutes. The F2's are more expensive than others but they operate so smoothly and the large tire make it easy to swing the trailer tongue in any direction.
by: S. Williams03/14/2017
Ordered one of these for my Ranger RT188 after seeing lots of good reviews on the BBC Boards! Item came with a couple scratches but I'm sure it will get more so I didn't worry about it too much. Everyone at etrailer was great! Called to verify as my shipping address is different than billing, I appreciated that. I had email updates right up until the item arrived. I love the jack and will do business with E-Trailer again in the future.
by: Scott S.02/21/2017
This is a really good quality jack, very sturdy even extended under load from the tongue weight of a 21' Jet boat. I bought it to replace a jack that I feared would end up failing and crushing my foot when moving around on the concrete floor. This jack will not allow that. The customer service at Etrailer was just as good, in fact I called to ask some questions about a wheel lock and ordered over the phone after viewing online.
by: Will 10/11/2022
If you trailer your boat more than average, this is the jack for you!
by: Greg04/15/2019
Put this jack on my Ranger rt188. The jack that came on the boat was the typical junk that skips and the wheel won’t turn. This jack is the real deal. Heavy duty and the wheel goes where you tell it to go. Absolutely the best jack I have ever had on my boat. I have had 7 boats. All will have this jack on them going forward.
by: Roger Stoffers03/04/2015
Couple of ttyhings. Seems to be a lot of play between wheel hub and axle bolt, installing a bushing might help or manufacturing tolerances tightened up. Also might be a good idea to put a grease fitting in center of wheel hub.
by: Marvin11/22/2017
Read on the Bass Boat Central forum that this was the jack to get for the new boat and trailer I'm buying. Wow, were they right. This thing is solidly built with a large diameter and width wheel. It is exactly as advertised and came within a couple days of ordering it. Etrailer actually shipped it the night I ordered it! Awesome product and great service. I will shop here again for all my trailer needs.
by: Marvin11/22/2017
As advertised and works perfect. Shipped the night I ordered it and arrived with the trailer jack. I highly recommend this brake with the Fulton trailer jack. Great product and great service. In the future I will do all of my trailer shopping on etrailer.
They exceeded my expectations!
by: Chad06/13/2019
I have been wanting to put this on my boat trailer for a couple years, finally made the purchase. Received in a very timely manner and love the beefiness of the unit. Only issue I was missing a lock washer and nut in the hardware package. I have to run to hardware store and find something.
by: David c01/29/2018
I tried to purchase this product 3 times.No one explained that there was different model numbers for different applications. etrailer was a big help. They took the time and looked up the right product information for my application. thank-you
by: Mark07/13/2017
The staff at etrailer are great. We had a urgent need to get our trailer able survey boat to project site and realized the trailer was in need of repair when we trailered the boat. I called etrailer and they had all the parts needed and was able to ship quickly to us. The parts fit and work great. Thanks a lot!
by: kevin s08/16/2016
Very nicely made and looks super heavy duty. Be interested to see how it stands up over time. Ordered two matching footplate F2's for the rear of the same car trailer.
by: James 05/03/2021
Great product, just mounted it on the trailer. You guy's are great to order from, only place I go for my boat trailer parts.
25
496
Show More Reviews
See what our Experts say about this Fulton Trailer Jack
- Availability of Winch Mounting Plate for Trailer and Fulton F2 Trailer JackThe Curt hitch mounted mounting plate part # C31010 that you referenced is designed to fit basically all standard winch mounting bolt patterns so it would work well with a Badlands 12,000 lb winch like you mentioned. Typically when people install winches on trailers they'll use a hitch plate like this with a hitch tube welded to the trailer like # GH-002. We do offer the Fulton F2 jack part # F1413140334 that you mentioned as well. This will work well on the frame dimensions you mentioned too.
view full answer... - Dolly Recommendation for Moving Small Trailer Around When Not Connected to VehicleThe best option is the Trailer Valet XL like part # TVXL25 for if you have a 2-5/16 inch hitch ball coupler or part # TVXL2. These will attach to the coupler and will allow you to move the trailer around easily by cranking the Valet. For a more traditional dolly we have the part # RA20 which you can use to pull the trailer around with the handle.
view full answer... - Replacing the Master Cylinder on a Model 10 Titan Actuator with Rear Access BlockedYes, you can replace the master cylinder of the Titan 10 Actuator by removing the inter slide. Removing all the parts in front of the master cylinder will be quite tedious. It may be easier to cut off the jack and replace it with a bolt on frame jack like # F1413140334. This will allow you access to the rear of the actuator to replace the master cylinder for disc brakes with # T4747100 or if you wanted one with the frame assembly # T4749501042.
view full answer...
- Fulton F2 Jack Mounted on a Ranger RT188 TrailerThanks! I attached the picture you submitted so that other customer can see what the Fulton F2 part # F1413140334 looks like installed on Ranger RT188 trailer.
view full answer...
- Could Fulton F2 Trailer Jack Fit Trailer that Has Mounting Plate Currently InstalledThe Fulton F2 jack part # F1413140334 that you referenced could possibly fit your trailer frame but we don't have a way to match it to the mounting holes you mentioned as it's mounting holes are 4-1/2 inch by 5-1/2 inch. This can fit most trailer frames that are 4 to 5 inches in height, or you could weld it directly to the trailer frame.
view full answer... - Recommended Swing-Up Trailer Jack For Pontoon Boat TrailerIt sounds like your trailer jack was a custom installation. We do not offer a jack that is designed to be mounted like you described. The jacks we have are either a bolt-on or they have a plate that can be welded to the trailer frame. The fold-up tongue jacks we offer for trailers are designed to fit trailer frames or tongues of different sizes like part # F1413140334 which will fit trailers with a 4 to 5 inch frame. This jack has a capacity of 1,600 lbs and is a bolt-on application....
view full answer... - Replacement Wheel for Fulton F2 Adjustable A-Frame JackYes, the Wide-Track Wheel Assembly for Fulton F2 Adjustable A-Frame Jack part # F500266 is a direct replacement for that wheel on your Fulton F2 Swing-Up Trailer Jack part # F1413140334. In order to lock this wheel in place, you will also need to install our Fulton Wheel Wedge Kit for F2 Swing-Up part # F500133.
view full answer... - Fulton F2 Swing-Up Jack for a T@B TAB Tear Trailer with a 1.5I think the Fulton F2 Swing-Up Jack is a good choice. The model for 4 - 5" frames is # F1413140334. The 1600 lb. tongue weight rating is much more than you need, but won't affect the function of the jack. The height will work and it will get the jack level with the tongue when traveling. My only concern would be that you have enough space on your frame for the jack to swing up. You will need approximately 25" of frame space that is free from other accessories to allow the jack to swing...
view full answer...
- Recommended Side-Mount Trailer Jack for Camper Trailer to Improve Tailgate ClearanceI understand your tailgate clearance need but I do not recommend going without a tongue jack on your camper trailer. What you might do instead, to both improve your tailgate clearance and retain the safety and utility of a trailer tongue jack, is install a different type of jack, a side-fame-mount type, in place of the A-frame tongue jack. The stabilizer jacks on your camper are designed to support weight but would not take kindly to the bumps they might receive as you back your tow vehicle...
view full answer... - Bolt On Swivel Trailer Jack Recommendation for a 6,000 lb 27 foot Boat TrailerTo determine the correct jack capacity for your boat trailer, you will need to know the tongue weight of the trailer. Once the tongue weight is known you can select a jack with a lift capacity that is equal to or greater than the tongue weight of your trailer. Typically tongue weights on boat trailers do not exceed 15 percent of the gross trailer weight capacity. Using this figure your tongue weight most likely will not exceed 1,000 lbs, (slightly more than 15 percent of 6,000 lbs) so...
view full answer... - Recommended Replacement for Dutton-Lainson Jack on New Shorelander Boat TrailerDutton-Lainson jacks are manufactured right here in the US and are actually really good quality. The mount used by your current Dutton-Lainson jack wouldn't be compatible with the Fulton F2, which leaves you with a couple of options. You could upgrade your current 1000 lb jack to a 1500 lb capacity Dutton-Lainson model like part # DL22580, which would allow you to utilize your current mount. The jack provides dual wheels for greater maneuverability and stability. You could also use...
view full answer...
- Differences Between The Fulton F2 And Bolt-Thru Trailer Jack In order to recommend an exact fit replacement boat jack for your 2007 Mastercraft single axle trailer, I would need to know the dimension of the bracket you have welded onto your trailer. In order for the Fulton F2 Swing-Up Trailer Jack part # F1413140334 to fit on the trailer, you would need a bracket with dimensions of 4-1/2" from the horizontal bolt holes and 3-7/8" from the vertical bolt holes. If you do not have these dimensions and would still like to use this jack, you will need...
view full answer... - Can Fulton F2 Trailer Jack Fit a 4 by 2 inch Trailer FrameThe threaded parts of the u-bolts for this jack are not long enough to secure the jack to a 2 inch wide frame so you may need to weld on a spacer so that it fits well. Other than that you can use Fulton jack # F1413140334. Another option is to use jack # FXP15L. The worst case scenario is that you would have to get different bolts but that is a lot better than welding on a spacer. I have linked videos of both jacks for you.
view full answer... - Fulton F2 Weld Plate Material on Swing-Up Jack # F1413200334 The Fulton F2 Swing-Up Jack w/ Pivoting Footplate - 5" Frame, Weld On # F1413200334 has a cast steel mounting plate. The rounded part of the jack is aluminum but other components are steel like the swivel housing according to my contact at Fulton. If you want to avoid welding, you can use # F1413040134 which will fit 3x3 and 3x4 inch tongues. The 4 and 5 inch frames require # F1413140334.
view full answer...
- How To Mount Fulton F2 Trailer Jack F1413140334 To Trailer W/ 6" Tall FrameI wish there was such an adapter, but there is not any sort of adapter to allow a trailer jack like the Fulton F2 # F1413140334 you purchased to be bolted on to your trailer frame since it is 6" tall. Your only option will be drilling holes and directly bolting the jack to the frame, though you will want to check with the manufacturer of your trailer first as drilling holes may void the frame warranty of your trailer. I included a video of the # F1413140334 for you to take a look at.
view full answer... - Mounting Bracket Hole Dimensions for the Fulton F2 Jack part # F1413140334 The mounting holes for the mounting bracket of the Fulton F2 Jack part # F1413140334 measure 5-1/2 inches apart vertically and 4-1/2 inches horizontally.
view full answer... - Will Fulton F2 Swing-Up Trailer Jack # F1413140334 Fit 2 inch Wide Trailer FrameAccording to my contact at Fulton, their 1600-lb capacity F2 Swing-Up Trailer Jack # F1413140334 will fit your 5-inch tall x 2-inch wide trailer frame with the included U-bolt mounting hardware. The jack is designed to fit 2-inch wide trailer frames. Please see the linked video.
view full answer... - Will a Fulton F2 Swivel Jack Fit a 2x5 Inch Trailer FrameThe threaded parts of the u-bolts for this jack are not long enough to secure the jack to a 2 inch wide frame so you may need to weld on a spacer so that it fits well. Other than that you can use Fulton jack # F1413140334. Another option is to use jack # FXP15L. The worst case scenario is that you would have to get different bolts but that is a lot better than welding on a spacer. I have linked videos of both jacks for you.
view full answer... - Fulton F2 Trailer Jack for a Trailer with a 5 Inch Tall by 2 Inch Wide FrameFor a Fulton F2 trailer jack that will fit your 5 inch tall by 2 inch wide frame I recommend # F1413140334. This is a single wheel model that will be easier to turn compared to a dual-wheel model. The jack is rated for 1,600 pounds. I have included a link to a video review of this jack for you.
view full answer... - Replacement Swivel Trailer Jack For 1994 Mastercraft Boat TrailerThe trailer jacks we offer that are similar to the # FTJ120W0301 you came from all use a mounting plate that has different dimensions than what you said your trailer jack plate has. You can remove the welded mounting plate on your trailer and have a new weld-on mounting plate installed or you can use a bolt-on jack as a replacement. The bolt-on option may be the best way to go due to the ease of installation and replacement if needed. For a bolt-on sidewind jack I recommend part # F1413140334.This...
view full answer... - How Much Does the Fulton F2 Swing Up Trailer Jack WeighIt looks like you were looking at the Fulton F2 Swing-Up Trailer Jack # F1413140334, and that Fulton jack weighs 21-lbs. This is a great option that is one of our lighter jacks, so it should do a great job in meeting your needs. I've linked some review videos of this jack for you to check out, as well.
view full answer... - Fulton F2 Swing-Up Trailer Jack for 2 x 5-Inch Trailer Frame MemberFor a Fulton F2 trailer jack rated for 1600-lbs that you can bolt on to your 2 x 5-inch trailer frame you can use the Fulton F2 model # F1413140334. This comes with u-bolts that will work on a 5-inch-tall frame member. I confirmed with my contact at Fulton that this jack will work well on your trailer frame.
view full answer... - Spare Tire Carrier and Jack Recommendations for a Load Rite Single Axle Boat TrailerYes, there does appear to be plenty of space to mount a spare tire carrier and spare on the tongue of your boat trailer. Fulton Hi-Mount Spare Tire Carrier - Fits 4- and 5-Lug Wheels Item # FSTC1000301 is a popular option. It will hold the tire out from the frame 4-1/2 inches so it will clear the winch stand. On trailer jacks such as # FXPD15L the retracted/extended measurements are taking from the center of the jack mounting bracket to the bottom of the jack. So on the # FXPD15L it is...
view full answer...
- Do Fulton Jacks Have Their Size and Other Specs Listed on the Spec StickerThere typically isn't going to be that type of information on a jack, but if you can find a part number somewhere you'll likely be able to find that information by cross referencing it on our site or another. With that said, it sound like you likely need something shorter. I recommend using a jack like the Fulton F2 Swing-Up Trailer Jack part # F1413140334 , which is designed for trailers with a 3" x 4" or 3 x 5" tongue. If you have a 3" x 3" or 3" x 4" tongue then you will need to use...
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Rachael H
Expert Research:
Jeffrey L
Installed by:
Rick A
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Shelly K
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Hannah L
Updated by:
Mike S
Updated by:
Carrie F
Video Edited:
Dustin K
Video Edited:
Chris R
Test Fit:
Shane H
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jackson
5/31/2021
Its been another year, and the jack is still working perfectly. Its lived outside all year and shows no signs of corrosion. I do need to pull it off at some point and tighten the bolts that cinch up the pivot mechanism, as its developed a little bit of play there.