Does Lock N Roll Articulating Trailer Hitch Setup Allow More Sway

Question

Question:

Hi, Does the use of a Lock n Roll articulating hitch exacerbate sway? Thanks.

asked by: Tom

0

Expert Reply:

The use of Lock N Roll Articulating Trailer Hitch for 2" Receivers # 336VS501 does not add sway to the setup. Couplers normally can articulate to the left and right like what this allows so it would not be any more prone to sway than a ball style coupler.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I reached out to Lippert to confirm and the Kwikee SuperSlide Tray Assembly with Trim Kit for RV Cargo Compartment part #LC370769 is adjustable as far as width goes. It is up to you to choose how wide you want the tray to be. Some will choose to…

view full answer...

Answer 2

Unfortunately, there isn&#39;t a way to use the #336VS501 Lock N Roll articulating hitch while using weight distribution. The good news is that we do offer a cushioned weight distribution shank, part #AMAC1. The shank has a 10K towing/2000…

view full answer...

Answer 3

I looked up pictures of the front of your 2018 NuCamp Tag Boondock Edition and it uses a standard A-frame style coupler like what the Lock N Roll Articulating Coupler #336TS504 is designed to fit so this would work well for you. You&#39;d…

view full answer...

Answer 4

Yes, the Extreme Off-Road Swing-Up Jack w/ Dual Wheels iItem #ORJW500D will work for your T@B 400 Tear Drop Trailer. It looks like your trailer comes with an a-frame jack. You would need to ensure you have enough space on your tongue to accommodate…

view full answer...

Answer 5

From the ground to the middle of the mounting bracket for the Extreme Off-Road Swing-Up Jack w/ Dual Wheels #ORJW500D measures 710mm (27.95") when you have it set at the highest setting. This jack gives us the ability to extend the leg using…

view full answer...

Answer 6

With the Lock N Roll Articulating Hitch #336VS503515 I recommend using the Tuson Asymmetric Sway Control #335TSC-1000. This sway control attaches to the electric trailer brakes on your trailer and will activate the brakes independently on the left…

view full answer...

Answer 7

The Lock N Roll Shanks like the part #336VS501 do not have any sway control built into them so they would not have ability to eliminate need for sway control. In general though the best best way to prevent sway is with proper trailer loading. If…

view full answer...

Answer 8

The Lock N Roll Articulating Channel Tongue Trailer Coupler item #336TS528 works great for both highway and off-road applications. This coupler has a 6,000 lbs gross trailer weight so it will be more than capable of handling your 3,500 lbs two…

view full answer...

Answer 9

The amount of bow that's put into trailer axles like the #7359765 is based on about how much a trailer is typically going to weigh that has a 3,500 lb capacity. So there's a bit of approximation and obviously it can't be…

view full answer...

Answer 10

Yes it is. The Replacement Control Knob item #RED78FR is the replacement knob for the Redarc Tow-Pro Elite brake controller EBRH-ACCV3 or item #RED44FR.

view full answer...

Answer 11

The Ark Articulating off-road coupler, part #AR44FR, actually doesn't fit into your trailer hitch receiver on your truck. It's for off-road trailers that have a receiver tube on them and then it couples to any 2 inch ball on your…

view full answer...

Answer 12

We can get your Jayco trailer set up with an articulating coupler to replace its current standard coupler. Since your trailer has an A-frame, there is one coupler that is going to work as a replacement, which is from Lock N Roll: - Lock N Roll…

view full answer...

Does Lock N Roll Articulating Trailer Hitch Setup Allow More Sway

Product Page this Question was Asked From

Continue Researching