Fulton Trailer Jack - A-Frame Jack - F1413250334 Review Video

While we don't carry that specific part number essentially it is just a 3,500 lb trailer axle hub/drum that has a 6 on 5-1/2 inch bolt pattern like the Dexter #84656UC3-EZ so this would work perfectly for you.

The Demco A-Frame Trailer Coupler part #DM14793-97 is designed for a standard a-frame trailer with a 50 degree angle. This is the most common type so there really shouldn't be any other issues that affect fit. That said, I have attached some…

The 'sleeve' or shank portion of the Fulton #F500266 caster assembly is meant to be compatible with Fulton F2 trailer jacks, which is why it's kind of oddly shaped. At the widest point, that sleeve is 2-1/2 inches in diameter, as shown in…

The only differences between the Demco eZ-Latch Couplers #DM37ZR and #DM14793-81 is that the former has integrated loop holes for installing safety chains and a about a 2" drop while the latter doesn't come with provisions for attaching the…

We have the A-frame tool box part #UWS01039 which would be tall enough for a propane tank that is 19 inches tall but the #313-TM362016M would be just a little bit too short for that. I attached a review video for more info on this for you to check…

I checked your order notes and the leaf springs you bought last year were the part #e28SR which are for 5k axles. Since this is over the capacity of your axle failure would not have been caused by over loading the trailer assuming you stayed under…

Thanks for that photo, I do appreciate it. And all of the couplers we have - and indeed all the ones I am aware of - require a frame that is fully engaged. While Demco was not able to provide a dimensional drawing, we did measure the Demco 50-Degree…

The back of the Demco A-Frame Trailer Coupler item #12660-97SP is 10-3/8" wide. I have linked a diagram below I made along with a review video.

I checked the Featherlite Trailer website for specs on the model 3116 trailer but this part number returned no results. But if your trailer uses an industry-standard 50-degree a-frame design then the Demco A-Frame Trailer Coupler #DM16680-52 will fit…

I recommend having the Demco A-Frame Trailer Coupler #DM14791-97 welded on in place of the Sleeve-Lock #CA-5196-B style coupler that you currently have. This Demco coupler uses a 2" hitch ball the same as your current coupler and is rated for up…

The Bottom Support Plate for 2-1/4" OD A-Frame Jacks - 5,000 lbs #JSP-100 you mentioned is 1/8" thick, has a hole diameter of 2.29", 8-3/4" long at the back, 5-1/2" long at the front, the diagonal sides are 3-7/8", and…

For your doors, I recommend the Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option - Black #295-000019 which you can obviously key alike when selecting that from the drop down box on the product page. These will fit latch cutouts…