Fulton Trailer Jack F500266 Review Video

The 'sleeve' or shank portion of the Fulton #F500266 caster assembly is meant to be compatible with Fulton F2 trailer jacks, which is why it's kind of oddly shaped. At the widest point, that sleeve is 2-1/2 inches in diameter, as shown in…

The Demco A-Frame Trailer Coupler part #DM14793-97 is designed for a standard a-frame trailer with a 50 degree angle. This is the most common type so there really shouldn't be any other issues that affect fit. That said, I have attached some…

The Extreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels, #ORJW350D has an overall length of 18".

The only differences between the Demco eZ-Latch Couplers #DM37ZR and #DM14793-81 is that the former has integrated loop holes for installing safety chains and a about a 2" drop while the latter doesn't come with provisions for attaching the…

Thanks for that photo, I do appreciate it. And all of the couplers we have - and indeed all the ones I am aware of - require a frame that is fully engaged. While Demco was not able to provide a dimensional drawing, we did measure the Demco 50-Degree…

The back of the Demco A-Frame Trailer Coupler item #12660-97SP is 10-3/8" wide. I have linked a diagram below I made along with a review video.

While we don't carry that specific part number essentially it is just a 3,500 lb trailer axle hub/drum that has a 6 on 5-1/2 inch bolt pattern like the Dexter #84656UC3-EZ so this would work perfectly for you.

Yes, the Extreme Off-Road Swing-Up Jack w/ Dual Wheels iItem #ORJW500D will work for your T@B 400 Tear Drop Trailer. It looks like your trailer comes with an a-frame jack. You would need to ensure you have enough space on your tongue to accommodate…

I spoke with my Fulton representative, who tells me that the Fulton #F1413250334 is set up to accept a wheel or a footplate, which will be held in by a snapper pin. If the jack doesn't have the collar with the pin hole, you must have a different…

With the ARK Xtreme Off-Road Swing-Up Jack #ORJW500D in its lowest position it is 6.49" from the center of the mounting point to the top of the jack. The other end of the jack when fully retracted is going to be 18.89" from the mounting…

I was able to have our warehouse measure the mounting plate for the Ark Extreme Off-Road Swing-Up Trailer Jack #ORJW350D you were looking at and included a diagram showing its dimensions. The Ark #ORJW350D mounting bracket measure 7-1/2" tall x…

For a very short jack we do offer a Swing-Up Trailer Jack #ORJW350D. It is 19" overall length when completely extended. The jack is capable of extending 7" and can be swung out of the way for additional ground clearance when towing. This is…