Demco Hydraulic Brake Line Kit Installation DM5425 Video

I believe what you mentioned is a standard way of running trailer brake lines on a tandem trailer. I attached a diagram for the brake line kit part #18TA-BLKIT and how it normally connects to a trailer. The main feed line runs to the first axle where…

Thank you for all of the photos and information! From what I can see it looks like you have a #84 spindle but that inner bearing blew out so you should be able to remove that inner sleeve that looks like it's still on the spindle (next to where…

It looks like you ordered the Demco Hydraulic Brake Line Kit for Single Axle Trailers - Drum Brakes #DM5402; the only difference between this and the Demco Hydraulic Brake Line Kit for Single Torsion Axle Trailers - Drum or Disc Brakes #DM5424 is a…

The difference is that the brake line kits for hydraulic drum brakes have two flexible hoses while the kits for disc brakes (which can be used with drum brakes) have four flexible hoses to connect to the calipers. The calipers "float" and…

Although I don't have a diagram for a tri-axle trailer, I do have one for a tandem. If you refer to the photo, you would plumb the brake lines as shown, but would add the additional lines and tees for an extra axle. Here's the part numbers of…

The Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs #K2HR35DKG will work fine on the second axle of your 2013 Venture boat trailer as long as the bearings and seal inner diameters match your spindles. This kit has the…

We have a FAQ article that covers everything you will need to add hydraulic drum brakes to your trailer. I have linked it for you. There are essentially 5 to 6 components you will need. First, the spindles need to have brake mounting flanges on them.…

We have exactly what you would need. For the right hand side you would want part #23-181, for the left hand side part #23-180. I attached an install video for you to check out as well.

The Furrion #FMCM15SS is a great appliance that will meet your needs. I researched the dimensions of your original Dometic and discovered they are 29 15/16" wide x 16 7/16" tall x 15 3/8" deep. The Furrion I'm recommending will fit…

It sounds like the motor is running but not building pressure. This could indicate a leak somewhere since you have a full reservoir. The next thing you can do is bleed the brakes to ensure the system is free of air in the lines. I have included a…

For a very similar coupler to your existing Dico 17550 model I recommend taking a look at the Titan Weld-On Coupler #T1755000. This weld-on coupler is designed for 3 inch wide trailer tongues and has a weight capacity of 21,000 pounds. I have…

We do have 12 inch drum brake assemblies that are designed for surge brakes like the part #AKFBBRK-7-D that is Dacromet coated and comes with a left and a right hand assembly.