Titan Master Cylinder Assembly Installation Video

We do have the Titan master cylinder replacement part #DX66FR which has the number 23744 stamped on the side of it. See attached picture. A lock out solenoid would attach directly to the back of the master cylinder without an adapter. If you are in…

If you look at the wheel cylinder of the brake assemblies part #23-399 and #23-398 you'll see the letters L and R stamped on them. The R means right hand side and L means left. I attached a picture that points out the letter. Right side means…

I believe that you have a Titan Model 10 actuator based off of the diagram that you are referring to which I have attached below. I contacted Dexter (they now own the Titan products) and the replacement shock part #T1242600 is not attached to the…

Thanks for the photos of your trailer's actuator! They were very helpful in answering your questions. Based on the photos, it appears that you have a Titan Model 10 Actuator #T1607500. For a Model 10 actuator, the #DX66FR that you referenced is…

Yes, the Dexter Brake Actuator part #T47457007K that you referenced is a replacement for your Titan Model 60 actuator.

In order to determine if the Hydraulic Trailer Brake part #AKUBRK-35R for right hand side or part #AKUBRK-35L for left hand side will fit your 2004 EZ Loader Boat Trailer you will first want to confirm that you have hydraulic brakes which is more…

I can tell you how to determine if the Dexter Hydraulic Brake Kit #T1878800-700 fit your trailer, but we have no way of knowing fits for any one trailer. You'll need to measure the inside of your drum and it needs to be 10" diameter and at…

For your replacement Dexter hydraulic brake assemblies, you will want the Dexter Hydraulic Trailer Brake Kit - Uni-Servo - 10" - Left and Right Hand Assemblies #23-312-313. These will work very well with your existing hub/drum assemblies.

Trailer wheel lug nuts that are 1/2-inch inside diameter typically have a 20-TPI thread pitch (20 threads per inch). Most lug nuts also use a 60-degree-coned profile like #CE11051, but a 90-degree like #STN569 is also available for 9/16-inch studs.…

It's not an exact match but the surge brake actuator we offer that would match what you have the best is the Demco part #DM8759411. This is for drum brakes, has a drop for the coupler portion like your current coupler, and has more than enough…

We do indeed offer a replacement breakaway lever assembly for the Titan Model 10, the part number is #T1054100.

We have not yet replaced the Shock part #T1242600 on a Titan Model 10 Surge Brake Actuator so I do not have any specifics for you but I have attached a parts diagram which shows you how the unit is broken down. You can then use this to get a better…