Demco Hydraulic Brake Line Kit Installation DM5402 Video

The Hydraulic Line Kit #9579-01 comes with two 18" flex hoses and two 51" steel lines.

Hey Kevin, for your Demco DA70 actuator you can use the Reverse Lockout Solenoid for Demco Hydraulic Brake Actuators #DM11993.

For a brake line kit to add a brake axle to an existing setup you'd just need the part #9579-01. This is listed as a 3rd axle kit but in reality it's the same thing as adding a second axle.

Hey Al, so we have a solution but since disc brakes require a higher PSI than drum the #DM62VR would not work on drum brakes. Instead you'd want to go with the part #DM72VR which is basically the exact same thing but made for drum brakes. You can…

Yes the Dexter DX7.5L A-60 Brake Actuator #DX83FR can be installed on a trailer with a 3 x 3 inch trailer frame.

Brake tubing is designed to be bent so as long as you don't go too crazy and bend the line so much that it weakens you could certainly bend the brake line when installing the Cargo Towing Solutions HydraStar Electric-Hydraulic Actuator #HBA16.…

Yes we actually installed the Torsion Demco Brake Line Kit part #DM5425 on a leaf spring trailer like what you asked about. You can see how we did it in the attach picture. I attached an install video for this for you to check out as well.

You wouldn't need a triple axle brake line kit, #HS496-253, because the Titan Disc Brake Kit #T4843800 already comes with 2/3 of what you need. So you would need a single axle kit #DM5424 or #DM5425.

The Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs #K2HR35DKG will work fine on the second axle of your 2013 Venture boat trailer as long as the bearings and seal inner diameters match your spindles. This kit has the…

If you shortened the lines of the Demco Hydraulic Brake Line Kit for Single Torsion Axle Trailers #DM5424 you'd have to have the ends of the line flared so what most do is coil the excess line with a tube bender. This also adds some flexibility…

The Brophy Camper Scissor Steps part #AS24 will require 1-1/4" of clearance between the bottom of the door and bottom of the cab on your Palomino Truck Bed Camper in order for the mounting bracket to attach. If you removed a portion of the trim…

The Atwood 84132 was designed for use with drum brakes, so for a qualified replacement, you'll want something compatible with a 3 inch trailer tongue with a 6K capacity, accepts a 2 inch ball and provides an electric lockout. Demco doesn't…