CE Smith Offset Spool Roller Assembly for Boat Trailers - Galvanized Steel w/ Black Rubber - 5"
(90 reviews)
Price: $35.94
In Stock
CE Smith Offset Spool Roller Assembly for Boat Trailers - Galvanized Steel w/ Black Rubber - 5"
Item # CE32150G
Retail:$43.50
Our Price: $35.94
You Save: 17%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (90)
- Q & A (0)
- Photos
CE Smith Boat Trailer Parts - CE32150G
- Rollers
- Spool Roller
- 5 Inch Long
- Black Rubber
- CE Smith
This roller assembly supports your boat's keel for easy loading and safe transport on your trailer. It features a 5-inch, black rubber spool roller and a galvanized steel bracket that attaches to your trailer's tongue.
Features:
- Spool roller supports your boat's keel as it sits on the trailer
- Prevents the bow from making contact with your winch
- Eases loading and unloading of boat
- Helps to absorb road shock while boat is being trailered
- Bracket lets you bolt roller assembly onto the tongue or frame of your boat trailer
- Offset base offers extra support
- Requires 7/16" bolts (not included)
- Sturdy, 1/8" galvanized steel bracket resists corrosion
- Black rubber roller delivers long-lasting performance
- Made in the USA
Specs:
- Roller length: 5"
- Shaft diameter: 5/8"
- Diameter of mounting holes (each): 1/2"
- Spacing of mounting holes: 3" apart on center
Typically installed flat on the tongue of a boat trailer, this spool roller bracket assembly stabilizes the keel of the boat during trailering.
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
32150G 1/8", Galvanized Steel, Offset Replacement Bracket with 5" Black Rubber Spool Roller by CE Smith
California residents: click here
Customer Satisfaction Score:
85% were satisfied with this product
15% of customers were not satisfied
- Did not arrive in time
- Alternate product found
- Product did not meet expectations
Customer Reviews
CE Smith Offset Spool Roller Assembly for Boat Trailers - Galvanized Steel w/ Black Rubber - 5" - CE32150G
Average Customer Rating: 4.7 out of 5 stars (90 Customer Reviews)
This roller assembly supports your boat's keel for easy loading and safe transport on your trailer. It features a 5-inch, black rubber spool roller and a galvanized steel bracket that attaches to your trailer's tongue.by: Jason 10/23/2023
Needed a couple of rollers for a project I was working on and etrailer.com is my go to place for trailer parts. Super fast delivery, no complaints here.
by: Fred 05/05/2024
This was a perfect fit, easy install, very Happy with the quality.
by: George09/01/2018
Flat trailer converted to dual use boat trailer. Product bow roller worked great!
by: Robert J01/22/2019
:Love the offset roller...Bolted it to our dock edge and use it to roll our kayaks into the water and it makes it easy to roll them out without scratching the botom...Very well made ...5*...
by: Jim B03/17/2018
I used some of your rollers to make an old trailer ready to haul our 32 foot Captains Gig.
by: Raul 09/12/2023
fast shipping excellent product. Thank s!
by: jon hedman07/03/2013
roller and bracket were nice. Had to drill a new hole in the trailer to mount. Already installed
thanks
Jon H.
7/4/2014
Theres not much more to say, good product , no problems
by: Jay08/29/2019
I ordered a the following -
CE Smith Post-Style Guide-Ons for Boat Trailers - 40" Tall - White - 1 Pair
CE Smith Offset Spool Roller Assembly for Boat Trailers - Galvanized Steel w/ Black Rubber - 5"
Master Lock TarpLok Bungee Cord w/ Secure Hooks - 32" Long
I placed the order on 8/9/2019 and the order arrived 8/13/2019. All of the products were exactly as I expected and fit my boat nicely. I would order again from etrailer.
by: 802Bob10/11/2017
The rubber keel roller on my 30+ year old GLT sailboat trailer had dried out to the point that it fell off the axel. This roller from etrailer was a perfect replacement, it arrived quickly, was easy to install, and I hope it lasts another 30 years!
by: Patrick07/20/2019
Came quickly and was installed today. Great service and good stuff, at etrailer.
Patrick
7/21/2020
Just finished remodel on boat so, I just started using it. So far, so good.
by: Mike O05/24/2019
Product seemed to be good quality however after just 5 boat launches one of the caps came off of the shaft and the shaft has backed out of the bracket on one end. Going to need to find a long bolt to replace this shaft or a better shaft with retainer pins in each end.
by: John03/08/2019
The end cap that holds the rubber roller fell off. Please send me a new cap.
Thanks
by: David07/06/2019
Using them to support stern inside boathouse mounted on 2 x 10's. Work fantastic. Tough rollers but not scratching bottom. Really like them a lot. Makes for a very easy launch & landing. Thanks! Great stuff.
by: Gary05/25/2021
Fast shipping. Only problem was one part was back ordered. I got an email about the back order right a way and tried to change the item to another that would ship sooner. The link was simple but did not work, I’m not sure if there was another step to take or what, it just wasn’t clear. I needed to call to get the part swapped. The phone lambrthret was extensive and time consuming.
But in the end I’m happy with what I got.
by: Craig04/07/2019
Item will do the job. Do not trust the cap nuts so will drill and install cotter pins. The video is great to assure ordering the proper item. Used to replace keel roller on older shorelander boat trailer.
by: Butch07/12/2016
Bow roller for my boat trailer rebuild is perfect. Base is offset from the centerline of the roller making for different mounting options.
by: Gregory 07/15/2022
Just what I needed and ordered. A nice, heavy duty roller for my boat trailer.
by: Paul 02/19/2023
Good experience on what I found to be a hard to find item. Good communication and prompt shipping. Both George J and Carol C did their job making this a pleasurable transaction.
by: John02/15/2019
Poor quality due to the product cap that keeps the rod in place came off so the roller collapsed and could not load the boat.
by: John P04/01/2017
This product is exactly what I was looking for. It fits my need perfectly. The price is quite reasonable. This product is very well designed. The metal is quite heavy gauge. This product should last me many years. The shipping was quite fast. Thank you etrailer for a good product.
by: JERRY05/15/2015
EXACTLY AS DESCRIBED, AND JUST WHAT I NEEDED FOR MY TRAILER. PRICE AND SHIPPING WAS VERY FAIR.
by: Gary10/25/2017
It's on the boat trailer. I haven't had the boat out yet....hopefully it works good. Thanks, Gary
by: Mike J10/18/2017
Did the job of preventing the front keel of my boat hitting the trailer
by: Timothy09/30/2018
I ordered this as a final part to put on my boat trailer. The order came in earlier than expected. It was exactly what I needed.
THANKS
25
90
Show More Reviews
See what our Experts say about this CE Smith Boat Trailer Parts
- Can CE Smith Offset Spool Roller Assembly Attach to Stainless Steel FrameGoing from galvanized steel to stainless steel wouldn't be an issue with the part # CE32150G that you referenced since they are the same type of metal. As far as spacing you'll need to use your best judgment but when in doubt using more would give you more support so I would lean that way if you aren't sure.
view full answer... - How Tall is the CE Smith Offset Spool Roller Assembly, # CE32150G.I went out to the warehouse and pulled a Offset Spool Roller Assembly, # CE32150G. Measuring from the bottom of the base to the top of the roller in the center section it is 3-3/8 inches. From the bottom of the base to the taller part at either end is 3-7/8 inches. I made a picture showing these dimensions.
view full answer...
- Recommended Tires, Brake Assemblies, And Hubs For 2004 Venture Boat TrailerFor your 2004 Venture Trailer, I recommend the Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" Diameter - 6 on 5-1/2 # AKHD-655-6-K. This comes with the bearings and seal you need. For your hydraulic brake assemblies, I recommend the Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 12" - Left/Right Hand - 5.2K to 7K # AKFBBRK-7-D. For your tires and wheels, I recommend the Provider ST225/75R15 Radial Trailer Tire w/ 15" White Mod Wheel - 6 on 5-1/2 - LR...
view full answer... - Can the CE Smith U Bolt # CE15253A Be Used to Mount the CE Smith Offset Spool Roller # CE32150GThe CE Smith U-bolt # CE15253A could be used to mount the CE Smith Offset Spool # CE32150G. The diameter of the u-bolt and the mounting bracket of the offset spool are both 7/16 inch, and are compatible. I have included a video demonstration of the CE Smith Offset Spool for your reference.
view full answer...
- Does CE Smith Spool Rollers CE10451G or CE32150G Have A Weight Capacity?Neither the CE Smith Spool Roller Assembly # CE10451G or CE Smith Offset Spool Roller Assembly # CE32150G have a specific weight capacity due to them not being designed to ever handle the entire weight of your boat. When your boat is contacting the Spool Roller it will also be on the bunks so you the bunks will actually be supporting the weight of the boat while the spool roller just makes it a bit easier for the boat to be loaded. I included videos for both of the products mentioned...
view full answer... - Availability of a Replacement Spool for the CE Smith Offset Spool Roller Assembly The CE Smith Offset Spool Roller Assembly, # CE32150G, does not have a replacement roller available for the unit. If the roller becomes worn out or damaged, the whole assembly will need to be replaced.
view full answer... - Height from Mounting Surface to Top of Roller of CE32100G and CE32150G For the Roller part # CE32100G that your referenced the distance from the mounting surface up to the top of the roller measures 3-5/8 inches. The roller part # CE32150G that you referenced instead measures 3-3/8 inches.
view full answer... - Availability of 5 inch Spool Roller Assembly in BlackWe have the part # CE32150G which is a 5 inch spool roller assembly in black rubber. The bracket is not slotted like the part # CE10451G though. Generally speaking the yellow non-marking thermoplastic is preferred to the black rubber as it won't mark up the boat at all.
view full answer... - What is the Distance Between the Mounting Hole on the CE Smith Offset Spool Roller AssemblyI pulled a CE Smith Offset Spool Roller Assembly # CE32150G that you referenced to measure the mounting holes and found that it measures 4-1/16 inches from the end of one slotted mounting hole to the end of the other. You should have no problem using mounting holes that are 3-1/2 inches apart. Check out the video I attached if you want to see me measure the distance between the mounting holes.
view full answer... - What is the Inside Width of the Roller in CE Smith 4-Inch Spool Roller Assembly I went out to the warehouse and pulled spool roller assembly # CE10400G to measure the inside width for you. The inside width is 1-3/4 inches so it will not work for you. Instead you will need a 5 inch assembly such as # CE32150G or # CE10451G. Please note that the rollers are not tested for use with a winch so I can't say whether or not it would work for that application.
view full answer... - Does CE Smith Spool Roller # CE32150G Have Weight CapacitySpool rollers such as # CE32150G do not have a weight rating. Usually you use more than one roller so the weight of the boat would be distributed a little more amongst all the rollers/bunks used so the amount of weight on any one roller would be less than the total weight of the boat.
view full answer... - Spool Roller Options for Trailer Carrying 14-Foot Hobie CatamaranThe CE Smith Offset Spool Roller Assembly # CE32150G that you referenced, as well as the other similar products shown on the link provided, all mount using user-supplied hardware. These are intended to bolt on directly, without U-bolts but rather with 7/16-inch or 1/2-inch fasteners you supply. The CE Smith Offset Spool Roller you referenced is 5-inches. We do offer longer keel roller assemblies, from 5 to 12 inches, and these can be seen on the second link. These are offered with either...
view full answer...
Do you have a question about this Boat Trailer Part?
Info for this part was:
Updated by:
Dan D
Updated by:
Wilson B
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Rachael H
Installed by:
Jeff D
Written by:
David L
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Bruce
4/12/2021
They are working well