Customers compare C24WR to these similar products
Products Featured in this Video
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The ball must be greased when using the Curt RockerBall Shock Absorbing 2" Hitch Ball #C40047. As you can see by the cut out of the linked instructions, if you don't have adequate lubrication the ball can fail so it is imperative you do. The…
view full answer...The Curt RockerBalls like the part #C40047 do not require the use of a Curt ball mount or trailer hitch. They can be used in essentially any brand of ball mount or hitch.
view full answer...The distance from the pin hole to the ball hole on the Curt Ball Mount for 2" Hitches - 5" Rise, 6" Drop - 8,000 lbs - Aluminum part #C24WR, measures 8-1/2 inches.
view full answer...For a 6 inch drop ball mount that is aluminum we have the Curt Ball Mount for 2" Hitches - 5" Rise, 6" Drop - 8,000 lbs - Aluminum #C24WR which would work well for you. It has a 8,000 lb capacity and weighs a total of 5 lbs. I attached…
view full answer...The closest LED tail light we carry to Bargman #30-92-002 that you referenced is part #328-003-81M1 for the passenger's side and #328-003-81LM1 for the driver's side. They're fairly close in size but don't have the reverse light…
view full answer...I have a few options for you to replace the Bargman 30-91-010 Tail Lights. There isn't a direct LED replacement. The Bargman Trailer Tail Light part #30-92-001 and part #30-92-003 are direct replacements but they are incandescent. You could…
view full answer...I spoke to a tech over at Curt and they confirmed the ball platform on their #C24WR is right at an inch thick. If you were looking for a ball to go with this, the Brophy #EH68C-C will be an 8,000 pound 2 inch ball option, and the Curt #C40007 will be…
view full answer...The Yakima EXO Swing Away Ski and Snowboard Carrier w/ Enclosed Cargo Carrier #Y94ZR will require a measurement of 8" from the center of the hitch pin hole to the back of the spare tire on your 2022 Ford Bronco. You can add the Yakima…
view full answer...First thing you will need to do is determine how much rise/drop you would need from a ball mount to tow your trailer level. For that you will want to check out the help article that I attached that details how to do this. Once you figure out what you…
view full answer...Absolutely our Tongue Weight Scale #e99044 will work perfectly with your travel trailer! Our scale has a 2,000 lb capacity which you may think that a 5,000 lb trailer would be too much for our scale, but it's actually an ideal size trailer. What…
view full answer...Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…
view full answer...I would be glad to make a recommendation and help you set up a ball mount for your 2018 Volkswagen Golf. I recommend the Curt Ball Mount for 2" Hitches - 5" Rise, 6" Drop - 8,000 lbs - Aluminum item #C24WR. You will also need a hitch…
view full answer...