Customers compare DM15349-52 to these similar products
Products Featured in this Video
Speaker 1: Today we're taking a look at the Demco 50 degree A-frame coupler. This is a channel mount design. Now this coupler installs onto your A-frame trailer, and provides attachment points for channel mount connectors, such as Lynette rings, a clevis, or a hitch-ball coupler. This unit features a capacity of up to 14,000 pounds. It is designed for 50 degree A-frame trailers. So,… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
I reached out to Lets Go Aero for confirmation that you can even use the Demco 50-Degree A-Frame Coupler #DM15349-52 and they said that you will not have any structural issues with having the bolt holes drilled in the sides of your Frame as the Demco…
view full answer...The Demco 50-Degree A-Frame Coupler without Jack Hole part #DM15349-52 is not available with a jack hole. If you want to add your own hole to accommodate a jack that would be acceptable.
view full answer...The main difference between the #RAS3611 and #RAS3611-HD is the capacity. The regular system has a 2,000 lb weight capacity while the HD system is 3,000 lbs. I would choose the HD system for the additional support. The lowest tension setting on the…
view full answer...We haven't had the chance to install the Curt Class V Trailer Hitch Receiver #C15703 on the 2008 Chevy Silverado 2500 so I don't have exactly how far beneath the bumper the receiver will sit, however I did go out to our warehouse to take a…
view full answer...Yes, you will be able to use the Demco Slide-Lok Trailer Coupler - Adjustable Channel Mount - Zinc - 2-5/16" Ball - 12,500 lbs #D05557-95 with the Demco 50-Degree A-Frame Coupler #DM15349-52. The #D05557-95 is for 3" wide channels and has…
view full answer...The Demco 6-Hole Adjustable Channel Bracket - Weld On - 12" Tall - 21,000 lbs #DM66134 is the weld on option for your trailer. There isn't a complete kit we offer, but it sounds like you are seeking the Demco 50-Degree A-Frame Coupler…
view full answer...Adjustable trailer couplers are not going to mount to your truck; they will attach to the frame of your trailer. Some of the adjustable couplers, such as the Bulldog Cast Head #BDA2563C0317 come with the mounting hardware to weld onto the frame of…
view full answer...Bulldog Collar-Lok Coupler #BD028287 and similar couplers have a sleeve that constantly puts pressure on the front of the coupler, the part that goes around the ball, so that it cannot come loose. There is also more surface area of the coupler making…
view full answer...I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…
view full answer...There is pretty much a standard for channel mount couplers such as #DM12113-95. The channel width is usually 3 inches and the couplers are usually around 2-7/8 inches wide to fit in the 3 inch wide channel. Once torqued down there is no side to side…
view full answer...When mounting a cast head coupler like Bulldog #BDA256C0317 to its mounting channel you will want to torque the mounting bolts to the specification indicated by the manufacturer in the instructions. The torque spec will vary from coupler to coupler.…
view full answer...The Demco #DM12688-95 you've looked at would be a good choice. The 2 inch channel mount coupler is compatible with a 3 inch channel, and has bolt spacing of 2 inches on center. Demco is known for high quality products, you'll get years of…
view full answer...