Brophy Hitch Ball - Trailer Hitch Ball - SC23-C Review Video

You are correct, the nut and washer of the 2 inch hitch ball #40083 are zinc coated whereas the rest of the ball is stainless steel.

Yes, you can absolutely use an aluminum ball mount with a stainless steel hitch ball without worry of the ball mount corroding. In fact, there are no aluminum hitch balls so manufacturers suggest the use of stainless steel as it is going to be the…

Brophy recommends using two large crescent wrenches to install the #SC23-C. Or at least one crescent wrench on top of the ball and a 1-7/8 inch wrench on the bottom.

For your tire size of 275/65R18 that you have on your 2020 Ford F-150 I recommend the Titan Chains part #TC2327 as they are easier to install, provide great traction due to the diamond pattern of the links, and are priced well too. Check out the…

The 2" Hitch Ball part #SC23-C is constructed entirely of stainless steel and has a polished finished. It works with ball mounts that accept a 1" diameter shank and trailer couplers that accept a 2" diameter hitch ball. I…

It is perfectly safe to use a ball mount like the #C45100 you were looking at with your 2003 Honda Odyssey. This ball mount has a gross towing weight of 3,500 lbs in the 6-1/4" rise position so it works for any trailer as long as it does not…

Technically any additional length is going to increase leverage on the trailer hitch. But there isn't an exact standard length ball mount so going super technical on how much the force multiplied when the ball mount is beyond a certain length is…

The BOLT Trailer Hitch Receiver Lock for 2" and 2-1/2" Hitches part #BL7023584 will fit a 2022 Toyota Tundra so long as it does not have a center cut key. If you have a push to start then you'd just need to use the emergency key in the…

The Bolt Trailer Hitch Receiver Lock, #BL7023584, will work on Toyota vehicle's that use standard cut keys. The attached photo will show you the type of keys that are compatible for the Bolt lock. If you have a center cut key for your 2017 Toyota…

It's actually pretty easy to tell if the BOLT Trailer Hitch Receiver Lock #BL7023584 will work with the key of your 2007 Toyota Tundra. If the key of your truck looks like the ones in the attached picture this lock would work with it.

To install the Brophy 2-Inch Hitch Ball #SC23-C on Fulton Ball Mount #F47CR you will use a suitable torque wrench (one like #ALL944001) to apply 250-ft-lbs of torque on the nut. I confirmed this with my contact at Brophy Machine Works.

The Curt Class III Trailer Hitch Receiver #13138 is certainly the hitch I recommend for your 2004 Ford Ranger so that the spare tire can remain stored under the vehicle. To choose the correct ball mount for your truck and trailer, it is best to…