CE Smith Boat Trailer Parts - Winch Stand - CE31013G Review Video

I attached a picture that we recieved from a customer that shows the CE Smith winch mount #CE31013G installed and in use on a trailer for you to check out.

The Malone EcoLight Sport Trailers like item #MAL43FR have 8" tires with a 5 on 4-1/2 lug pattern. The Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel item #AM3H490 would work as a replacement but you will most likely…

The closest bow roller bracket for winch stands that we have to the dimensions you listed is the CE Smith #CE31005PG. This bracket is 13-3/16" tall and is designed to fit around a 3-1/2" wide winch. We do not currently offer any…

The diameter of the mounting bolt hole on the CE Smith Bow Roller Bracket for Winch Stands, #CE31005PG, is .45 inch. The bracket uses a 5-1/4 inches long x 1/2 inch diameter steel shaft for attaching the roller/Y-stop, which is part #CE10700A. The…

To mount the CE Smith Winch Stand #CE31013G on a trailer requires you to slip the lower portion with the holes drilled through it over the pole tongue of your trailer. The various holes are there to allow you to match the correct height and angle…

The mounting holes on the bottom of the CE Smith Galvanized Winch Stand #CE31013G measure 7/16-inch. Please refer to the linked photo. This 30-inch tall winch stand is made of 12-gauge steel and is intended for 2-inch trailer tongues. It is…

The Kenda 205/65-10 Bias Trailer Tire #AM3H490 that you referenced has the standard trailer tire speed rating of 65 miles per hour. There are some trailer tires that have higher speed ratings, but none of them are in the 10 inch rim size since that…

We have all of the components you are looking for to turn your MicroSportXT, part #MPG460XT, into a mini boat trailer! For your rollers, I recommend the Dutton-Lainson Boat Trailer Deluxe Roller Bunk, part #DL21741. They have a 5' span so they…

I included a winch that will be very comparable to what comes on the CE Smith Multi Sport Plus Boat and Kayak Trailer #CE48870, but we do not have that exact model. I should also mention that there is no hardware included in this list, but everything…

The closest option we have to what you are looking for is the CE Smith Winch Stand part #CE31013G which gives you a slightly angled back winch stand that can attach to your boat trailer tongue. This is overall 30 inches tall and 2 inches wide.

I went out into our warehouse and measured the bolt holes of the Trailer Coupler #DL13800 that you referenced and found them to be about 1/2 inch space 3 inches on center. Check out the video I put together that shows taking this measurement. If you…

Since the Malone Microsport trailer part #MPG460G has a tongue width of 2 inches you could use the tower kit part #CE31013G which is 30 inches tall as this is designed to fit 2 inch channels. Then you could use a winch like the Buyers Products part…