What Size are the Bolt Holes of the Trailer Coupler # DL13800
Question:
Hello, I have a seal selection trailer with a 1-7/8 coupler. I want to install this 2inch coupler on it. Can you tell me what size bolt holes this has. Thanks
asked by: Gene
0
Expert Reply:
I went out into our warehouse and measured the bolt holes of the Trailer Coupler # DL13800 that you referenced and found them to be about 1/2 inch space 3 inches on center.
Check out the video I put together that shows taking this measurement. If you zoom in on the measurement of bolt hole centers you can clearly see the 1/2 inch holes.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Coupler 2" Ball 3" Channel Tongue (3,500 lbs.) by Dutton-Lainson
- Straight Tongue Trailer Coupler
- Standard Coupler
- 2 Inch Ball Coupler
- Bolt-On
- Weld-On
- 3500 lbs GTW
- 3 Inch Channel
- Trigger Latch
- Dutton-Lainson
more information >
Continue Researching
- Shop: Yates Flat Bow Stop for Boat Trailers - Heavy-Duty Rubber - 5-3/8" Span - 1/2" Shaft
- Shop: CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide
- Shop: Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 2" Ball - Bolt On - 3,500 lbs
- Video: Dutton-Lainson 2 Inch Ball 3 Inch Channel Tongue Trailer Coupler Review
- Video: Review of etrailer Boat Trailer Parts - Roller and Bunk Parts - HP35FR
- Video: Dutton-Lainson Straight Tongue Trailer Coupler - Standard Coupler - DL13800 Review
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE31005PG Review
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE10160GA-2 Review
- Shop: Trailer Coupler 2" Ball 3" Channel Tongue (3,500 lbs.) by Dutton-Lainson
- Shop: CE Smith Heavy Duty, Vertical Bunk Brackets - 90 Degree - Galvanized Steel - 6" Tall - Qty 2
- Shop: CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On
- Shop: CE Smith Carpeted Bunk Boards for Boat Trailers - 6' Long - 1 Pair
- Search Results: boat trailer guide posts
- Search Results: boat trailer bunks
- Search Results: trailer coupler
- Search Results: trailer winch post
- Search Results: winch post assembly
- Search Results: boat trailer winch stand assembly
- Search Results: psej10000101
- Video: Yates Rubber Boat Trailer Parts - Bow Guard - YRJONBLOCK Review
- Video: CE Smith Boat Trailer Parts - Winch Stand - CE31013G Review
- Q&A: Bolt Hole Locations for etrailer Trigger Latch Channel Tongue Coupler for 2" Hitch Ball
- Q&A: Replacement Trailer Coupler for 2 inch Hitch Ball
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Couplers
- Q&A: Country of Manufacture and Speed Rating of Tire Used on # AM3S440 Wheel/Tire Combo
- Q&A: Bolt Hole Pattern on Dutton-Lainson Model 970 and 980 Trailer Couplers
- Q&A: What is the Height of Dutton-Lainson 5K Trailer Coupler # DL13897
- Q&A: Dimensions Of Trailer Coupler To Replace Surge Coupler On 2002 Jayco Pop Up Camper Trailer
- Q&A: 5000lb Trailer Coupler Recommendations for Hydra-Sport 22 Cubby Cab Boat That is 4500lbs