CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE31005PG Review Video

The diameter of the mounting bolt hole on the CE Smith Bow Roller Bracket for Winch Stands, #CE31005PG, is .45 inch. The bracket uses a 5-1/4 inches long x 1/2 inch diameter steel shaft for attaching the roller/Y-stop, which is part #CE10700A. The…

I attached a picture that we recieved from a customer that shows the CE Smith winch mount #CE31013G installed and in use on a trailer for you to check out.

I am not familiar with the exact bow stop you have pictured but we do carry a few options such as the Yates Flat Bow Stop for Boat Trailers part #YRJONBLOCK which is what I recommend using. It's designed to be used with a bracket such as the…

I went out into our warehouse and measured the bolt holes of the Trailer Coupler #DL13800 that you referenced and found them to be about 1/2 inch space 3 inches on center. Check out the video I put together that shows taking this measurement. If…

The best part about boat trailers is that everything is universal so a lot of the parts you add to them are about preference and have to do with the type of boat you're carrying. I recommend checking out the CE Smith Bow Roller Assembly…

I included a winch that will be very comparable to what comes on the CE Smith Multi Sport Plus Boat and Kayak Trailer #CE48870, but we do not have that exact model. I should also mention that there is no hardware included in this list, but…

The inside width of the CE Smith Bow Roller Bracket #CE31005PG has an internal width of 3-11/16 inches so for a winch that is narrow enough to fit inside that we have the #DL16001 which measures 3-3/16 inches in width.

You will only need one keel roller assembly, and I recommend the CE Smith - which is also made in the USA - because they come with a full assembly as opposed to having to piece together parts, which can be more costly. You only need to choose the…

The Reese Towpower 3-Way ATV Hitch #RP7065000 measures 2" at two of the holes and then 2-5/8" at the middle one. I've attached a photo for you to reference.

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

Yes, you are able to put a smaller tire on the trailer to lower it, however there are a few things that you want to consider when choosing a smaller tire. According to my research the standard tires that are on your trailer are ST175/80R 13LRC tires…

To measure the width of a trailer wheel you will measure from where the tire beads will seat on the wheel. That will be from the inside of the inner wheel flange to the inside of the outer wheel flange, not from edge to edge of the wheel. To measure…