CE Smith Carpeted Bunk Boards for Boat Trailers - 3' Long - 1 Pair
(626 reviews)
Price: $65.75
In Stock
CE Smith Carpeted Bunk Boards for Boat Trailers - 3' Long - 1 Pair
Item # CE27800
Our Price: $65.75
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (626)
- Q & A (0)
- Photos
CE Smith Boat Trailer Parts - CE27800
- Bunks
- Bunk Boards
- 3-3/4 Inch Tall
- 36 Inch Long
- 1-3/4 Inch Wide
- CE Smith
These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 3-foot-long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.
Features:
- Carpeted, wooden bunk boards support your boat's hull during trailering
- Marine-grade black carpeting with velvety finish is strong, soft and weather resistant
- Minimizes scratches on the hull
- Resists mold and mildew
- Rinses off easily and dries quickly
- Bunk boards install easily in either of 2 ways
- Mount to existing brackets on trailer frame
- Attach to trailer frame with swivel brackets (sold separately), allowing for height and angle adjustment
- Copper-free construction is safe to use with aluminum and steel boats
- Made in the USA
Specs:
- Quantity: 2 bunk boards
- Dimensions: 36" long x 1-3/4" wide x 3-3/4" tall
- 3-Year sun-fade warranty on carpeting
These carpeted bunk boards provide hull support for your boat during transport and storage. Each 3-foot-long board is wrapped in weather-resistant, marine-grade black carpet. You can run the bunk boards front to back for traditionally shaped hulls or side to side for flat-bottom boats, kayaks and inflatables.
To attach the bunk boards to the front and rear crossmembers of your trailer frame, use existing brackets or a four-pack of swivel mounting brackets (CE10000G-4, CE10001G-4 or C10002G-4 - sold separately). These brackets allow you to install the bunk boards at different heights. In addition, they enable the bunk boards to tilt to accommodate and support boat hulls of different sizes.
27800 Replacement Bunk Boards by CE Smith - 36" Long - Qty 2
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
CE Smith Carpeted Bunk Boards for Boat Trailers - 3' Long - 1 Pair - CE27800
Average Customer Rating: 4.8 out of 5 stars (626 Customer Reviews)
These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 3-foot-long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.by: Larry07/29/2018
I ordered these replacement boards for my trailer and they are exactly what I expected and shipped very fast! I will order from etrailer again!
Side note: the care in which they packed these boards for shipping speaks to the excellence of this company!
by: Mike JL07/30/2018
I am in the process of refurbishing a boat and trailer I've had since 1995. I was going to recarpet the side bunks until I saw these at etrailer.com. They are nicer than I could have done myself and the price made this purchase a no-brainer. I am a very happy customer!
by: Excellent Replacements06/15/2020
Delivered on time and easy to install. No pre-drilled holes, so there's flexibility to fit to your trailer.
by: Matthew C03/18/2014
Great material and stapling. Bought several 3 foot sections and a couple of your pontoon brackets to make a carrier for my canoe. Fits in the back of the truck perfectly. Quality products, great prices, super fast shipping. Thanks guys
by: Danny 11/09/2023
Service was fast and efficient. Thank y ou!
by: HL08/07/2015
These bunks are exactly what I needed to replace the old rotted out ones that fell off of my trailer. I thought that I was
going to build my own, and priced the carpet needed to do it myself. For the price of the carpet, I was able to buy 2 matched and ready to go from etrailer.com! Thanks for saving me a days work and providing a professionally made matched set !
by: Bill04/20/2022
East to install stays outside not covered still looks brand new.
Bill F.
4/21/2023
Fantastic I have to leave my canoe trailer uncovered outside in the elements but it looks brand new.
by: Larry 07/19/2023
Fit was perfect and are holding well. Good product
by: Donald T09/24/2019
I was thinking of making these myself but when I went on your website I changed my mind immediately. For the price you can't go wrong. saved me a lot of time and aggravation. The price for shipping was more than reasonable and fast. I am impressed with the quality of these. I have ordered from etrailer before and will continue to do so.
Papa D.
10/6/2020
Great!!
by: Fred Rickson07/17/2015
Well, they are just two pieces of carpeted 2 X 4....what can I say. However, if your like me, they will save you much time, money, and effort. You WILL NOT have to buy a heavy duty staple gun, or, instead, a quart or so of Barge Cement, or go find something heavy to weight the carpet down while the glue dries, or figure out how much carpet to buy in the first place, or, finally, hurt yourself cutting carpet with a sharp object. Just go buy the pre-carpeted bunks, they are great.
Fred R.
7/16/2016
Just fine.
by: Mike05/17/2016
Serves my purpose of guide on risers to make it easier for wife to see when trailering the boat. Installed both in less than 5 minutes.
Michael G.
5/17/2017
Great
by: Kirk 09/07/2023
Great quality
by: Edward 08/15/2023
Fits nice and quick delivery
by: David06/24/2023
Met my needs, good price
by: Justin 07/27/2023
Perfect fit
by: Daniel 07/26/2023
Just what i wanted,delivery was quick.T HANKS
by: Kent C.05/09/2014
The product was exactly as advertised and at a great price. Could not find the item locally. Shipping was quick and notices from etrailer.com kept me in the loop. Very satisfied.
Kent C.
5/11/2015
Still working great after 1 year!
by: Larry11/05/2022
Nice. The seam on the bunk should have been on the 2 inch side. My bunks are guide- ons A bit pricy..
by: Dave Reynolds07/10/2015
New bunk boards replaced 45 year old bunks. Fit perfectly just as originals. Quality is great and look nice installed.. Thank you
Dave R.
7/9/2016
Bunks have held up nicely, no problems after 1 year...
by: Mike Caruso07/08/2017
I needed parts for my 1962 Balko tilt small boat trailer. I call after making a list of parts I wanted and talk with customer service rep Sandy J. Awesome she checked all items for being in stock so I could get my order on Friday. That way I could start on it Friday night and have Sat and Sun to finish it up. As you see in the picture as of Sat night 8:30 CST almost done. I will finish up tomorrow and a big thanks to Sandy J. The team at eTrailer who got my order packed and shipped out on time. Parts are good quality for dollars spent. I highly recommend eTrailer for parts but so nice to find someone who cares about what they do everyday. One tip is to bore the hole into the bunker and installl a piece of PCV pipe for the 1/2 bolt to ride on instead of just the wood. I also mixed up some West Systems Epoxy and coated the hole in the bunker, PCV pipe and slide them into place. Added a Stainless Steel washer to each side done deal.
I'll be back If I ever needed anything again.
Regards,
Mike
by: Ron 09/19/2019
I just received my recent order from etrailer. The order consisted of a set of side bunk boards for my boat trailer. The ordering process was simple and quick. The order processing was just as fast and I received the order in a few days. The product was as advertised. I am very satisfied. I have not yet mounted the boards to the trailer. They look as good or better than the original factory equipment. I do not have a photograph to share. I look forward to using etrailer.com in the future.
Ron
by: James 06/03/2023
Fit like a glove
by: Jerry07/06/2018
The CE Smith Carpeted Bunk Boards 3' long were as advertised and fit and worked well for our boat trailer.
by: Ken06/21/2016
Product came on time. Very fast delivery. Appears to have fantastic customer service. George has been keeping me posted on the order. I will let my friends know about E-Trailer and their products.
Buy with confidence. Awesome products. I have not replaced the boards yet, due to my boat w/trailer is in the shop. The product looks and feels to be very well made.
Thank you very much.
Ken
25
604
Show More Reviews
See what our Experts say about this CE Smith Boat Trailer Parts
- What Brackets Needed to Install Bunks on Boat TrailerWe sure do, I'd recommend the # HP52FR bunk bracket and u-bolts like # CE15283GA-2. We also offer pre-carpeted bunks in various lengths, as part # CE27800 for a 3 foot, # CE27810 for a 4 foot, # CE27820 for a 5 foot, # CE27840 for a 6 foot and # CE27845. Or, you can provide your own boards and carpet them using bunk carpet like # CE11349.
view full answer... - Availability of Different Length Bunk Boards for Boat Trailer for 1983 MonArkSince you are referencing the CE Smith Carpeted Johnboat Bunk Board for Boat Trailers # CE27850 which runs across the trailer, I am assuming by width you mean the length of the board. The bunk board that comes with the # CE27850 is 2' long, and we do have other sizes. These bunk boards come in the following lengths: 3' - # CE27800 4' - # CE27810 5' - # CE27820 6' - # CE27840 7' - # CE27845 All of the bunk boards are 1-3/4" wide x 3-3/4" tall and come in pairs with the exception of the...
view full answer... - Availability of Crossbar System from the Malone MicroSport Trailer # MPG460GThe Malone MicroSport Trailer # MPG460G uses crossbars like what you would find on the roof of a vehicle instead of bunk boards. This is sold on our site as the Malone Crossbar Conversion Kit # MPG475 and it comes with the mounting hardware. If you are wanting carpeted bunk boards instead we have them in the following lengths: 2' - # CE27850 3' - # CE27800 4' - # CE27810 5' - # CE27820 6' - # CE27840 These come in pairs.
view full answer... - Material of CE Smith Carpeted Bunk BoardsThe CE Smith Carpeted Bunk Boards # CE27800 are made from untreated southern yellow pine. Then they are covered with a marine-grade, weather resistant black carpeting.
view full answer... - Recommended Carpeted Bunk Boards And Carpet For Tandem Boat TrailerIf you are looking for carpeted bunks for your tandem boat trailer we offer 5 different lengths for you. The boards come in 2 ft, part # CE27850, 3 ft, part # CE27800, 4 ft, part # CE27810, 5 ft, part # CE27820, and 6 ft, part # CE27840. Each of these bunk boards is a 2 x 4 covered with marine-grade carpet that helps protect the hull of your boat as it is loaded and unloaded. If you have longer bunks and you want to cover the bunks you have we carry marine-grade carpet that would work...
view full answer... - Replacement Options for 17' Long Bunk Boards for a 20' Pontoon BoatIt is recommended to have bunk boards at least 50% of the length of your boat. But since you currently have 17' bunk boards, we would recommend that you replace your boards with that same length. The longest complete bunk board that we have are the CE Smith Carpeted Bunk Boards # CE27845 which are 7' long (this is 1 pair). So you would need to buy (2) of these and (1) of the CE Smith Carpeted Bunk Boards # CE27800 (3') to get 17'. Or what I would recommend is to get some 10' 2x4's from...
view full answer... - Availability of 10 Foot Long Carpeted Bunk BoardsAlthough we don't offer carpeted bunk boards that long, they're very easy to construct yourself using # CE11372 bunk carpet and locally obtained 2 x 4's. I'd recommend using redwood if you can find it, it'll last a long time. You'd need two rolls of the carpet. I'd use some contact cement and staples to attach the carpet to the bunks. I made some carpeted bunks for my SeaDoo trailer about 5 years ago, and they still look good today.
view full answer... - Bunk Boards and Mounting Brackets for a 2006 Sholander Sea Ray TrailerI have a couple of options for adding bunks to your 2006 Sholander Sea Ray Trailer but we do not carry 12 foot bunks for shipping reasons. We do have 6 ft bunks they are the CE Smith Carpeted Bunk Boards for Boat Trailers item # CE27840. These are 72" long x 1-3/4" wide x 3-3/4" tall and are sold in pairs. If you are set on having 12 foot bunks then you will want to use the CE Smith Deluxe Marine-Grade Carpeting for Bunk Boards item # CE11330. This 11" wide x 12' long carpeting is designed...
view full answer...
- Replacement Carpeted Bunk Boards for a Boat Trailer with 10 Foot Long Bunk BoardsFor bunk boards that are 10 feet long you could use a couple sets of the 5 foot long bunk boards, # CE27820. You would use one set of each 10 foot section needed. If brackets are needed you can use bolster bracket set # CE10000G-4. You will need at least 2 bracket per board.
view full answer... - Parts Needed to Convert a Boat Trailer From Rollers to BunksIn order to switch from rollers to bunks, you will need to remove the rollers that you are no longer using. I do not see a reason why you can't continue to use the front rollers. You would just want bunks that stop a little but before the front rollers so they do not interfere with each other. You would need to get the bunk boards, swivel brackets and u-bolts for installing the bunk boards. You will need to measure to determine the correct length of bunk board that fits between the middle...
view full answer...
- Parts Needed to Convert a Boat Trailer to Bunk BoardsIt sounds like you are wanting to convert a boat trailer to bunk boards. There is not a kit for this because each trailer/boat varies. To do the conversion you will need the bunk boards, brackets and u-bolts. It is recommended to have bunk boards that are at least 50% of the length of your boat. You can have longer boards if you would like, but you want at minimum 50% of the length. I have included the length of bunk boards that we carry below. You can piece the lengths together as needed...
view full answer... - Recommended Bunk Boards For Boat Trailer To Support 16-Ft Deep V Boat The weight of the boat on your trailer should be shared by the keel rollers and the bunks. All of the weight should not be placed on either the rollers or the bunks. It sounds like you have bunks that are just too short for your boat size. I recommend adding additional bunks like part # CE27800 to your trailer so all of the weight does not fall on the keel rollers. To support the bunks I also recommend the bracket assemblies like part # CE10196G-4.
view full answer... - Pontoon Boat Carpeted Bunk Trailer RecommendationWe sell carpeted bunks that should work for you trailer, they are sold in differing lengths. You will need to measure the lengths of the bunks currently on your trailer to determine what length bunks you should get. We offer the following lengths, they are all 2x4's covered in carpet: 6 foot long CE Smith Bunks part # CE27840 5 foot long CE Smith Bunks part # CE27820 4 foot long CE Smith Bunks part # CE27810 3 foot long CE Smith Bunks part # CE27800
view full answer... - Bunk Boards Needed to Carry Kayaks on Boat TrailerYou can actually purchase the carpeted bunk boards and the brackets that hold them, like what is on the CE Boat Trailer # CE48810, separately. This way you can add more to your trailer if you have the room for it. The Bolster and Swivel Bracket Assemblies # CE10000G-4 can be installed on your boat trailer using the CE Smith U-Bolts # CE15283GA-4. These U-Bolts are 3-13/16" long, 3-1/16" wide, and have a 1/2" diameter. For bunk boards we have a couple of different length options for you...
view full answer... - Replacement Carpeted Bunks For Boat Trailer RecommendationWe offer both carpet that you can use to replace your worn carpet on your bunks for your trailer, and we also carry replacement carpeted bunks for your trailer. The carpeted bunks we offer come in varied lengths. If you need 6 ft bunks, I recommend part # CE27840. These come in a set of 2, and is wrapped with marine-grade black carpeting. For 5 ft bunks, you would need part # CE27820, for 4 ft bunks, part # CE27810, and for 3 ft bunks you would need part # CE27800. If you decide you...
view full answer... - Available 8 Foot and 30 Inch Boat BunksThe longest boat bunks we carry are 7 feet long, part # CE27845. Also, the closest we have to 30 inches is 3 feet long bunks, part # CE27800. Since we don't have the exact lengths you're looking for you can make your own by purchashing lumber locally and using marine carpet, part # FCR8012, to cover them
view full answer... - Recommended Bunk Board Replacement Options for Boat TrailerFor your boat trailer, the length of bunks is dependent on the boat and the trailer, so I would be hesitant to change anything from the factory. It soulds like you have a couple of 2 foot bunk boards that need to be replaced and you can use the CE Smith Carpeted Johnboat Bunk Board for Boat Trailers - 2' Long - Qty 1 # CE27850 for the replacement. You can use shorter bunk boards in combination to reach your current lengths. Doing so will sometimes even increase the strength because...
view full answer... - How To Choose the Correct Roller or Carpeted Bunk Boards for a TrailerThe size of bunk board or bunk roller you will need for your boat trailer is based off the hull size. However, generally speaking the manufacturer knows what size roller/bunk works best for the boat/trailer. Therefore I recommend using the same size that the trailer came with but it wouldn't hurt to go a bit longer if you have room. If you are switching from rollers to carpeted bunk boards then I would go longer. For the carpeted bunk board option we have part # CE27800 which are 36" long,...
view full answer...
- Will Wood of CE Smith Carpeted Bunk Boards # CE27800 RotThe CE Smith Carpeted Bunk Boards # CE27800 are made from untreated southern yellow pine which is a wood that can withstand a high amount of moisture without rotting. Then they are covered with a marine-grade, weather resistant black carpeting
view full answer... - CE Smith Carpeted Bunk Board Length Availabilities I do have a few similarly sized bunk boards however, we currently do not carry bunk boards in the exact specification you requested. We currently have 4 different sizes of bunk boards. The CE Smith Carpeted Bunk Boards for Boat Trailers are carpeted 2x4's available in 6' part # CE27840, 5' part # CE27820, 4' part # CE27810, and 3' part # CE27800. It is however possible for you to modify the length of the boards to meet your exact needs as long as you don't mind trimming and re-attaching...
view full answer... - Blue Carpet Recommendation to Make Blue Carpet Bunk BoardsThe best solution I can provide is to use our blue bunk carpeting part # CE11350 to wrap your own 3 foot sections of wood to make blue bunks. Otherwise we do not sell a version of the # CE27800 with blue carpeting.
view full answer... - Replacement Bunk Boards and Brackets Needed for 1997 Esco Boat TrailerTypically yo'll use brackets like part # CE10000G-4 with U-Bolts like part # CE15283GA-4 and then a combination of bunk boards like the 3' long # CE27800, but since we don't have specs on what came with your 1997 Esco Boat Trailer you'll need to take some measurements of your trailer frame, your current hardware, and bunk boards to choose the correct replacement parts. Once you look at what is on your trailer you can either filter through the linked selection of boat trailer parts for...
view full answer... - Parts Needed To Convert Boat Trailer From Rollers To Bunk BoardsSwitching from roller bunks to bunk boards on your boat trailer is fairly straightforward. For the most part, you will just be replacing the rollers with the boards. We have the following bunk boards available: -CE Smith Carpeted Bunk Boards for Boat Trailers - 3' Long # CE27800 -CE Smith Carpeted Bunk Boards for Boat Trailers - 4' Long # CE27810 -CE Smith Carpeted Bunk Boards for Boat Trailers - 5' Long # CE27820 -CE Smith Carpeted Bunk Boards for Boat Trailers - 6' Long # CE27840 -CE...
view full answer... - Recommended Bunk Brackets for Zodiac Inflatable Pontoon Boat Trailer The CE Smith Bolster Bracket # CE10052-32G features a span of just barely over 15 inches so it might be a bit small to comfortably support the 16 inch tubes on your Zodiac Inflatable Boat. You will likely be better off using a set of standard brackets like the CE Smith # CE10196G-4 that feature a swiveling design to let you tilt the bunk boards at an angle for the pontoon. For the bunk boards themselves you can use the CE Smith Carpeted Boards that are available in lengths of 7 feet #...
view full answer...
Do you have a question about this Boat Trailer Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Video by:
Zack K
Edited by:
Frances L
Written by:
David L
Video Edited:
Jacob T
Video Edited:
Chris R
Installed by:
Cole B
Installed by:
Randy B
Updated by:
Wilson B
Updated by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Hl
8/6/2016
Still looking great and working as expected