Will Wood of CE Smith Carpeted Bunk Boards # CE27800 Rot

Question

Question:

Are the 2 x 4 boards treated lumber for moisture and won’t rot?

asked by: David R

1

Helpful Expert Reply:

The CE Smith Carpeted Bunk Boards # CE27800 are made from untreated southern yellow pine which is a wood that can withstand a high amount of moisture without rotting. Then they are covered with a marine-grade, weather resistant black carpeting

expert reply by: Jameson C

1

Answer 1

I have a couple of options for adding bunks to your 2006 Sholander Sea Ray Trailer but we do not carry 12 foot bunks for shipping reasons. We do have 6 ft bunks they are the CE Smith Carpeted Bunk Boards for Boat Trailers item #CE27840. These are…

view full answer...

Answer 2

The weight of the boat on your trailer should be shared by the keel rollers and the bunks. All of the weight should not be placed on either the rollers or the bunks. It sounds like you have bunks that are just too short for your boat size. I…

view full answer...

Answer 3

Although we don't offer carpeted bunk boards that long, they're very easy to construct yourself using #CE11372 bunk carpet and locally obtained 2 x 4's. I'd recommend using redwood if you can find it, it'll last a long time.…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 11

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 12

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Will Wood of CE Smith Carpeted Bunk Boards # CE27800 Rot

Product Page this Question was Asked From

Continue Researching