bing tracking image
  1. Hitch Adapters
  2. CURT
  3. Hitch Extender
  4. Fits 2 Inch Hitch
  5. 18 Inch Extension
  6. 3500 lbs
Curt Extender for 2" Hitch Receivers -18" Long

Curt Extender for 2" Hitch Receivers -18" Long

Item # C45796
Retail:$269.99
Our Price: $81.40
You Save: 70%
Hitch Adapters
Shipping Weight: 20 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Extend your trailer hitch receiver opening so that your can clear your spare tire when using your hitch-mounted bike rack or so that your trailer won't hit a rear-mounted propane tank when you make sharp turns. Powder coated steel resists rust. 1-800-940-8924 to order CURT hitch adapters part number C45796 or order online at etrailer.com. Free expert support on all CURT products. Great prices and Fastest Shipping for Curt Extender for 2" Hitch Receivers -18" Long. Hitch Adapters reviews from real customers.
  • All Info
  • Reviews (219)
  • Q & A (0)
  • Videos (2)
  • Photos

CURT Hitch Adapters - C45796

  • Hitch Extender
  • Fits 2 Inch Hitch
  • 18 Inch Extension
  • 3500 lbs
  • Bike Racks
  • Cargo Carriers
  • Hitch Mounted Accessories
  • Trailers
  • CURT

Extend your trailer hitch receiver opening so that your can clear your spare tire when using your hitch-mounted bike rack or so that your trailer won't hit a rear-mounted propane tank when you make sharp turns. Powder coated steel resists rust.


Features:

  • Extends your trailer receiver opening out from the rear of your vehicle to avoid obstacles
    • Get extra clearance for your trailer
    • Mount your bike rack without having to remove your rear-mounted spare tire
  • Extends hitch 18" from center to center of hitch pin holes
  • Black powder coat finish


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Maximum gross trailer weight: 3,500 lbs
  • Maximum tongue weight: 350 lbs
  • Overall length: 23-1/4"
  • Distance from center of hitch pin hole to center of the hitch pin hole: 18"
  • Limited lifetime warranty


Note: Using a hitch extender will reduce your hitch's overall capacity by 50%.



45796 Curt Extender for 2" Receivers - 18" Long





Video of Curt Extender for 2" Hitch Receivers -18" Long

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Curt 2 Inch Hitch Extender Review

Hi, John with etrailer. If you have a vehicle that has a rear-mounted spare tire, then you know all too well that there's a lot of accessories that just don't want to work with your vehicle. Well, now they can. Today we're gonna be taking a look at the CURT line of hitch extenders. Now these come in a variety of sizes, anywhere from eight inches, 14 inches, up to 18 inches in length. Now having different size hitch extenders is gonna help you for different situations.

You know, our situation today, we have an H2 that could never have a bike rack on it from the factory, and so we use CURT's 14-inch extender. We now have a bike rack. We don't have to shove the bikes right off the trail into the back of it. We can put it on here, and this 14-inch fits the Hummer nicely. Even when the bikes are off, we can fold this up into the stowed position, something that, again, previously we couldn't do.

We've had a lot of questions for like special cases like this, or even Jeep owners, that also have rear-mounted spare tires. There's also situations with SUVs and some minivans where they have a recessed hitch, and so they're running into the same situation. Will this fit on my one vehicle It might fit on another vehicle, but you don't wanna buy two different bike racks or two different cargo racks. If you can get one nice rack or one nice carrier, and use it for both vehicles, then that's the way to go. Now, another reason for the different size hitch extenders is a situation like this, where towing would be either very difficult or nearly impossible to do without an extender.

You can see just in this instance, we're using the eight-inch extender, and that's gonna bring our hitch ball almost dead even with our spare tire. So getting the jack up and down, hooking up, all of that stuff is gonna be much, much easier. One thing to keep in mind when you are looking at hitch extenders is with your safety chains, realize that you're pushing your trailer however many inches back, depending on the extender size. So you may need to lengthen your safety chains to be able to make sharp turns and such. So we're back in the shop, and we've got the three solid shake options laid out for you here.

Now let's talk about some of the weight capacities, and how this could affect your towing performance. Each of these is rated at 3,500 pounds gross trailer weight rating, and 350 pounds maximum tongue weight rating. Now, the one thing you need to keep in mind when using hitch extenders is that if there's anything under 12 inches, such as our eight-inch extender here, then this is gonna reduce your tongue weight rating on your hitch by 25%, just because of the mechanical advantage and the leverage that we're putting on the hitch. Anything over 12 inches, such as the 14 and 18 here, this is gonna reduce your tongue weight rating on your hitch by 50%. Also, how does this affect your gross trailer weight rating Even if your hitch is rated at five or six or 7,000 pounds, we have to abide by the lowest number. And on these hitch extenders, that lowest number is gonna be 3,500 pounds. Now, a few options you may wanna pick up with your extender is an extra pin and clip. Since you're gonna have an additional piece of equipment back there, you'll need an additional pin and clip. These are gonna take your five-eights inch pin and clip, probably recommend possibly a locking one. We have those here at etrailer. Also, there's gonna be an anti-rattle clamp that may do you some good. These sometimes tend to be a little sloppy, once you start hooking up equipment back there, and you're gonna get some noise and possibly vibration out of it. The anti-rattle clamp is going to eliminate a lot of that movement, and just make for a nicer ride. So how do you know which hitch extender is gonna be right for your particular situation Well, CURT measures these extenders from pinhole to pinhole. So for instance, this eight-inch is gonna read eight inches from the center of the pinhole to the center of the other pinhole, and so on and so forth. So it puts a 14 and the 18. So for instance, when we hook the camper up to the H2 here, we measured from the center of the pinhole on our factory hitch, and by the time we added the extender and our drop ball mount, it put us exactly where we wanted, which was out at the edge of the spare tire here. So in the end, no matter which hitch extender you choose to alleviate your situation, I just don't think you're gonna go wrong. Whether it comes down to the welds, the powder coat finish, or the reinforced collar, I think CURT's quality is second to none. One thing is that these shanks on here, on all three of them, they're solid steel. This is something that's just gonna last, and it's gonna be a great addition to your towing equipment. So that's gonna complete our look at CURT's line of hitch extenders.

Customer Satisfaction Score:


Customer Reviews

Curt Extender for 2" Hitch Receivers -18" Long - C45796

Average Customer Rating:  4.9 out of 5 stars   (219 Customer Reviews)

Extend your trailer hitch receiver opening so that your can clear your spare tire when using your hitch-mounted bike rack or so that your trailer won't hit a rear-mounted propane tank when you make sharp turns. Powder coated steel resists rust.

by:

I got this hitch extender to put on my camper so that I could mount my bike rack. It worked like a charm!! The bike rack and bike were super solid on the trip cross country!!



by:

First off, I love Curt products. When I found this item at Etrailer at this low price I was shocked. I was prepared to receive a knock off. I tried my luck and was amazed the product not only showed up at my doorstep the next day but is a very high quality Curt product. My handyman was working on the house and he couldn’t believe the quality at that price. Thanks Etrailer! You are my new go to for my traveling needs.



by:

I HAVE A JOHN DEERE GATOR AND IT WAS DIFFICULT CONNECTING TRAILERS TO THIS HITCH WITHOUT GETTING ON YOUR HANDS AND KNEES.. NOT ONLY THAT BUT THE TRAILER HAD TO HAVE A LONG TONGUE.

SINCE I PURCHASED MY C 45796 CURT EXTENDER FOR MY 2 INCH RECEIVER , I NOW CAN HOOK UP ANY TRAILER AND TOW IT SUCCESSFULLY AND HOOKING UP IS VERY EASY. NO MORE GETTING ON THE GROUND . I AM WELL PLEASED WITH THE CURT EXTENDER

THANKS FOR QUICK DELIVERY



by:

The tow extension 18” is solidly built, I will be using it when I launch my boat to keep the tow vehicle farther from the water.



by:

Fits my hitch and clevis pin perfectly. Weld is very professional and the whole part is well-finished.



by:

Came as described, did what i wanted it to do which was extend my Dirt bike rack out past my tailgate, so i could some Hooligan/ neck breaking [stuff]. Really solid well built part though durable, worked well have no complaints or isses with the product.



by:

Purchased to use on my 2020 Yamaha Drive 2 golf cart hitch. I ordered this and an 18” receiver extension. When I placed my online order I received a phone call the next morning asking if was aware that the extension and the receiver hitch were different sizes and would not work together. I was very grateful for the call as I had not realized I had ordered items that would not fit together. Great Customer Service!!!



by:

Very well made, the male end is solid 2”x2” steel and the female end has a steel band around the end for increased strength. Nice hard baked on finish as well, it arrived with the box damaged, but the 18 inch hitch extension didn’t have a scratch on it. I deducted one star because it is not made in the USA.



by:

My truck bed camper is so easy to access with the hitch stair and extender. Having them has finished my project off perfectly. Thanks.



by:

Ordered on a Saturday afternoon and received on Wednesday morning. It doesn't get much better than that. No more bending under the rack to hook up a trailer.
Thanks Etrailer

Ron M.

3/22/2018

It’s a quality product and I highly recommend it if you need an extension on your ATV.



by:

This product work perfectly. Very strong material, it will not bend under a load. I use it to extend out from under my UTV to attach the salt spreader.



by:

I have been dealing with etrailer for nearly a decade. I have always receive quality products in a timely manner. I needed to make a return (I ordered the wrong item) and the return was handled cheerfull with Korren.



by:

Perfect for John Deere 835R

Etrailer Expert

Mike L.

3/4/2019

Keep in mind that using an extender such as this will lower the capacity of the hitch both towing and tongue weight capacity by half.



by:

Works great



by:

Going fishing and hunting will be much easier now. Now I can get in the bed of my truck & get things out easy. I have a brand new truck & didn't want to scratch up the tailgate. Also shipped very fast. Thanks



by:

Very solid product.



by:

Needed this item to be able to tow my boat behind my pick-up with 9 foot camper.
Had put off towing because I thought I needed a very long extension bar coupled with a weight distribution system...which would not be compatible with my trailer anyways. So I gave up on the idea of towing with it, leaving the boat behind on trips for over ten years. That all changed when I perused the etrailer web site for solutions. Found the solution with the Curt 18" extension bar and the Roadmaster Quiet Hitch (RM-061). With a 12 inch ball mount on the end, and securing both with a pair of Roadmaster Hitch Quieters, it turned out to be perfect. I can move forward and turn either direction just past 45 degrees with out danger of a jack-knife event. My boat/motor/trailer weighs about 1,300 lbs, so I was well within the reduced weight limits imposed by using an 18" extension bar with the class III hitch. The Hitch Quieters were like "icing on the cake," eliminating 3/8" of horizontal and especially vertical "slop" and associated noise. The boat can go with me all the time now.

Jim R.

7/25/2018

Just great! I tow without a worry. The set up quite often becomes the topic of conversation at the boat ramp when others see it.



by:

Great products arrived super fast, super quality, I'll send a picture when I get them installed. My gate was closed, I hand carried the package down 400 ft. of driveway. Now I'm resting, good quality weighs a bit. Thanks a million.



by:

Rock solid, heavy-weight, and inspires confidence. I ordered two and linked them together because I couldn't find something longer without spending a lot more and a complicated install. I had a simple problem to solve - a deep keel 22 foot sailboat at a boat ramp and I needed another few feet of tongue length to keep my tailpipe out of the water. I stop at the top of the ramp, hook up the two lengths, and I have just enough distance to keep the pipe out of the water. Of course I remove the extenders for any travel over the road. The two pieces together are very easy to handle as components and the price was much lower here than other vendors. And, did I mention that I ordered early one morning and in a different time zone and George J had it out the door in under 2.5 hours. I figure he processed my order right after he got to work and before he went to the coffee maker. Thanks George.

Patrick

7/20/2018

Thanks for asking, I’m very satisfied with it but don’t use my extension apparatus all that much. It was for my boat trailer and I had to deal with a ramp situation that had me concerned. It solved the problem and I keep it stored safely away for the next time. I only trailer once or twice a season and sometimes not at all as we have the boat at a slip. But, if a hurricane is coming and there is a need to pull it quickly the extension will make all the difference in the world. Thanks again.



by:

The Curt 18 inch extender arrived on time especially for this time of the year. It is seriously heavy duty, well constructed. It will be used on my Gator for towing a log splitter, will save my back big time for those familiar with the rear hitch receiver location on a Gator. I am sure I will find other uses for it on my P/U or MH. Great product at a fair price and shipped for free. How good is that?

Dan S.

12/1/2018

The extender is working out great, I have used it many times, I like it even better after each use. Fantastic product and company to deal with.



by:

Received my 18" extender for my 2" receiver in 3 days. It's going to work perfectly, enabling me to haul bikes with the Thule spare me bike rack at the same time as cargo on a luggage rack at the end of the 18" extender on my Jeep Wrangler. Product is super heavy, therefore, super durable.

Frank S.

6/19/2018

Still enjoying the product, working out great



by:

I bought this extender after a lot of looking around, this one does the trick!!! It is SOLID Square, not heavy wall tube, the only thing that might hurt this is a Atomic Bomb!!!!! I plan to tow my boat behind my truck with the tail gate down because the camper is 8', and my truck bed is 6'2", the 18" model was exactly what I needed. Shipping was fast, the whole buying experience was PAINLESS, will order from these folks without worry!!

Mike P.

10/25/2017

Fantastic!!! This extender will be here long after a Atomic bomb goes off. Very well built!!!



by:

I haven't used it yet, but it fits fine on my 2017 Nissan Frontier. It appears to be solid and has a great finish. I'm excited that I can now pull my scooter/motorcycle trailer with my tailgate down allowing for more cargo and camping gear in the bed.

Potential buyers should keep in mind that you will likely need longer chains and a lighting wire extension for your trailer.

Etrailer Expert

Mike L.

5/23/2018

Please keep in mind that using the # C45796 Hitch Extender will decrease the towing and tongue weight capacity of the hitch by 50.



by:

Just what it was supposed to be. Strong enough to hold the specified tongue weight and then some.



by:

I use this product to get the ball far enough out from under my John Deere gator so I can pull my log splitter to where I need it. Works great.

Dave S.

1/3/2018

Works great


25
219
Show More Reviews

See what our Experts say about this CURT Hitch Adapters

  • Can Hitch Extension Help Allow Truck to Lower Tailgate When Towing
    A hitch extension does cut your trailer hitch capacity by 50 percent, but for as light of a trailer as you have and how heavy duty your tow vehicle is that wouldn't be an issue. So yes, a 14 inch hitch extension like the # C45795 would be a solid choice to allow you to drop your tailgate!
    view full answer...
  • Can Dual Receiver and Hitch Extender Be Used Together For Towing with a Bike Rack
    It would be too dangerous to use the Curt Extender # C45796 with a dual receiver like that as it would put too much movement on all of the different parts and extenders like this cut your tongue weight in half so your Tacoma would be overloaded. Instead I recommend checking out the following parts to see if this will potentially work for your scenario: - Replacement Shank for Gen-Y Adjustable Ball Mount # 325-GH-304 - Thule Camber Bike Rack for 4 Bikes # TH9056 - Hidden Hitch Ball...
    view full answer...
    Image 1 for
  • Availability of 24" Hitch Extension for Use with 2008 Ford F-250
    The longest extender we have available with the single shank is the 18" Curt # C45796. Anything longer than that and you'll need to install the TorkLift # TLF1002 on your 2008 Ford F-250 so you can use the SuperTruss Hitch Extension # TLE1524. You will need to remove the OEM hitch to install the TorkLift.
    view full answer...
  • Does Using Extra Long Ball Mount Affect Towing Experience or Capacity
    A longer ball mount like the Brophy # BM20 that you referenced will indeed put a bit more stress on the trailer hitch/rear of tow vehicle due to that added leverage, but not to the point of it having an actual negative impact on towing or cutting into your overall towing capacity. The manufacturers of this particular ball mount have determined through testing and physics well over my head that it will maintain the full weight capacity of your existing hitch, along with the tongue weight...
    view full answer...
  • Using Buyer's Products 337RT25836B 36 Inch Receiver Tube as Hitch Extender
    If the tow vehicle has a 2 inch hitch, a receiver tube like # 337RT25836B would not fit into it, as its outer dimension is roughly 2-1/2 inches square. If your tow vehicle has a 2 inch hitch the longest extension we have available for it is 18 inches, part # C45796. The extender would reduce the tongue weight capacity of your hitch by half, so be aware of that. If the hitch has a 2-1/2 inch receiver, the # 337RT25836B would fit, but you might need to lightly sand off some of the powder...
    view full answer...
  • Extending a 2 Inch Trailer Hitch 30 Inches to Clear In-Bed Camper when Towing a Boat Trailer
    For a regular extension that fits a 2 inch trailer hitch receiver the longest available is going to be 18 inches such as # C45796. In order to reach at least 30 inches you would then need to use a ball mount that measures at least 12 inches from the center of the hitch pin hole to the center of the ball hole. But I do not know how much rise or drop you need to tow the trailer level. So what I did was include a link to the fixed ball mounts that would be long enough, as well as a link...
    view full answer...
  • Measurement of the Receiver Portion of Curt Extender C45796
    The receiver portion itself of the Curt Extender for 2" Receivers # C45796 is approximately 17 inches; the shank itself is approximately 6 inches. Then, from pin hole to pin hole the measurement is 18 inches, which is why it is called an 18 inch extension. I have added a link to a video review for you to check out as well of the Curt Extender for 2" Receivers # C45796.
    view full answer...
  • Will Draw-Tite Trailer Hitch Receiver 41945 Fit 2004 Ford E-350 Cutaway W/ Utility Bed?
    As long as the bolt holes in each frame rail are 38-5/8" apart you are correct that the Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2" # 41945 will bolt up to the frame on your 2004 Ford E-350 Cutaway. Now since your bumper sticks out so far the only option is the Curt Extender for 2" Receivers -18" Long # C45796 but this will limit the # 41945 to a 350lb tongue weight rating and a 3500lb trailer weight rating. I included videos of the products...
    view full answer...
    Image 1 for
  • Is 24 Inch Extension Available for Class IV 2 Inch Trailer Hitch Receiver on 2008 Dodge Ram 3500
    The longest hitch extender that is available for the Class IV 2 inch hitch on your 2008 Dodge Ram 3500 is going to be an 18 inch like part # C45796. Please keep in mind that using a hitch extension is going to reduce your hitch's overall capacity by 50 percent. For a 24 inch extension your Ram would have to be equipped with a Torklift Hitch, # TLD1102-30 for Ram with factory hitch or # TLD1101 for Ram without factory hitch. You could then use # TLE1524 for the extender.
    view full answer...
  • Can Curt Trailer Hitch Extender C45796 Be Used To Carry Bike Rack & E-Bikes On 1996 Chev 2500HD?
    As long as the trailer hitch receiver on your 1996 Chevrolet Silverado 2500HD has a tongue weight rating of 700lbs or more and a trailer weight rating of 7000lbs or more then the Curt Extender for 2" Receivers -18" Long # C45796 you were looking at will work just fine to carry your bike rack and bikes. This adapter is limited to 350lbs tongue weight and 3500lb trailer weight or 50% of your trailer hitch receivers capacities, which ever is lower. I recommend using the etrailer Anti-Rattle...
    view full answer...
  • Recommended Hitch-Mounted Bike Rack to Use with Truck Camper and Maintain Rear Door Access
    I may have a solution for you, however the Thule EasyFold XT 2 Electric Bike Platform Rack # TH903202 referenced in your question isn't the best option for your particular application. With the carrier mounted to the hitch there is not a way to move the base out of the way so that you could easily access the rear door on your truck camper. As you also mentioned, the shank on the bike rack features a rise to provide better ground clearance but there is not a separate part or adapter available...
    view full answer...
  • Longest Available 2-Inch Hitch Extensions for Use with Truck Bed Camper
    For a 2-inch hitch the longest hitch extensions we offer are the 60-inch # TLE1560 and 48-inch # TLE1548, both from TorkLift. However, these only work along with a TorkLift brand SuperHitch dual-receiver type hitch that has the strength and included safety chains to handle the extra stress from the trailer load being further from the hitch. To use one of these you will need to also install a SuperHitch. The longest standard 2-inch hitch extension that will work in any hitch is 18-inches,...
    view full answer...
  • How to Extend a Class III, 2 Inch Trailer Hitch at Least 24 Inches
    The longest hitch extender for 2 inch hitches is 18 inches long, # C45796. If you use it with a long ball mount, # C45230, it would provide and overall extension of about 29 inches. Please note that the use of an extender will reduce the tongue weight capacity of the trailer hitch by 50 percent at least. If you were to use the ball mount only it would not reduce the tongue weight capacity. But by using an extender it does reduce the capacity.
    view full answer...
  • Recommended Hitch Extension for Flat towing Jeep Grand Cherokee
    I have an option for you, but I'm afraid the Curt Extender for 2" Receivers -18" Long, part # C45796 won't work for your application. It has a capacity of 3,500 lbs, and from what I found, your Jeep Grand Cherokee exceeds that. If a 12" extension is enough for what you need, your best option, with a 10,000 lb capacity, is the Bue Ox Hitch Extender # BX88264. This is the longest extension with the highest capacity we have available for a 2" receiver. Otherwise, please let me know the year...
    view full answer...
  • Compatiiblity of Brophy Long Ball Mount with Curt 18 Inch Hitch Extension
    I looked up the owner's manual for your 2013 Jeep Grand Cherokee SRT 8 and you are correct that the tongue weight max weight is 500 lbs. Using an extension like # C45796 will reduce the tongue weight of the trailer hitch receiver by 50% but that hitch may be rated higher than the 500 lbs tongue weight. That doesn't mean you can exceed the 500 lb tongue weight set by the manufacturer but the hitch may be able to support more or less than 250 when reduced by the accessory because it is...
    view full answer...
  • Availability of Extra-Long Ball Mount and Hitch Extension for 2-Inch Hitches
    Hitch extenders such as the Curt 18-inch model # C45796 and the others shown on the linked page can give you more space between vehicle and trailer but they do so at the cost of reducing your hitch's capacity by half. This is true for virtually all such adapters. There are longer extensions that do not reduce capacity but these extenders such as the 4-foot TorkLift SuperTruss Hitch Extension # TLE1548 require that your tow vehicle have their specialized dual-receiver SuperHitch. There...
    view full answer...
  • 18 Inch Hitch Extender that Fits 2 Inch Trailer Hitch
    The # D30 you referenced is for hitch fabrication and it sounds like you simply need a hitch extender. There is an 18 inch extension, the Curt Extender for 2" Receivers -18" Long # C45796 which you can use with a bike rack. The only thing to note is that the use of any extender will reduce the overall capacity of the hitch by 50 percent and that includes the tongue weight capacity. This is important because the tongue weight capacity of your hitch is the max weight your bike racks and...
    view full answer...
  • Roller Bunk Compatibility with Aluminum Boats and Trailer Tongue Extension Options
    Our roller bunk manufacturers do not exclude aluminum boats, however, one issue that you could run into when using roller bunks on an aluminum boat is that the only support the boat's hull will have is the small surface of the rollers. If the boats hull is not strong enough to support it's weight on the small surface area of the rollers, then you could see dimpling on the hull from the rollers. A carpeted bunk provides more surface area for the boats hull to rest on. I spoke with my roller...
    view full answer...
  • Can Curt 2-Inch Hitch Extender # C45796 Be Used on 2007 Hummer H2
    If the hitch on your 2007 H2 is a 2-inch size then you can use an adapter/extender like the Curt Hitch Extender # C45796. However, you need to be aware that use of any extender will reduce your hitch's tongue weight and towing weight ratings by 50-percent. This loss of hitch capacity results from the change in the geometry of the forces on the hitch. In the same way that slipping a length of pipe over a tire iron gives you more leverage to loosen a stubborn lug nut, using an extender...
    view full answer...
  • Could Curt Extender # C45796 be Used with 2015 Dodge Ram 1500 with Tailgate Down
    Hitch extenders like the part # C45796 that you referenced can work great for your application but the catch is that they cut the capacity of the hitch they are installed in by 50 percent. Since your trailer has a dry weight of 2,800 lbs your trailer hitch would need to have a capacity of 5,600 lbs for it to work. Also the extender itself cannot be used to tow more than 3,500 lbs so you'd need to verify you are under that capacity as well.
    view full answer...
  • Hitch Extender Compatibility with 2 Inch Receiver Load Extender
    The Replacement Backbone for Thule 2 Bike Expansion Accessory 753-3588 will not work with your load extender, however I do have an option for you. The Curt Extender for 2" Receivers -18" Long # C45796 will work in a similar way and will be just 1 inch shorter than the Thule part you mentioned. This will reduce your hitch tongue weight capacity by 50% and you will want to consider the amount of torque on your hitch from having an accessory carrying weight that far out from your hitch....
    view full answer...
  • Recommended Extension for RV for Pulling a 2016 Kia Soul
    The Roadmaster Dual Hitch Receiver Adapter, 8" Drop/Rise # RM-077-8 is designed to allow you to flat tow a vehicle like your 2016 Kia Soul and also use a RV rated bike rack or cargo carrier in the other receiver. It has a total tongue weight rating of 400 lbs, but your trailer hitch may further reduce that number. You can flat tow up to 10,000 lbs with this adapter, but again your trailer hitch may further restrict that capacity. You cannot use a ball mount with this adapter. From the...
    view full answer...
  • Trailer Hitch Extension for 2 Inch Hitch on 2019 Audi Q8
    I can certainly understand wanting to keep the wheels of your 2019 Audi Q8 out of the saltwater, and while there are hitch extenders that will add distance, there isn't a 36 inch extender that will work. The longest hitch extender is 18 inches, and there are a couple available that will work with a 2 inch hitch: the Curt Extender # C45796 and Brophy Hitch Extender # HE18. To secure any of these extenders to your hitch you will also need the Pin and Clip # PC3 if you do not have one already.
    view full answer...
  • Will the TorkLift SuperTruss Hitch Extension Work On a GMC Sierra/Chevy Silverado 1500
    I do have an option for you but the TorkLift SuperTruss Hitch Extension isn't an option for a GMC Sierra/Chevy Silverado 1500 since they don't offer a trailer hitch for this vehicle needed to use this extension. The longest extension we offer is 18", the Curt Extender for 2" Receivers part # C45796. If you're using a weight distribution system we offer the Equal-i-zer Weight Dist Shank part # EQ90-02-4600. I couldn't say for sure whether either option will allow you to tow with the tailgate...
    view full answer...


< Previous
123. . .5



Do you have a question about this Hitch Adapter?


Info for this part was:

Employee DeAnne T
Written by:
DeAnne T
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee John A
Installed by:
John A
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.