bing tracking image
  1. Hitch Adapters
  2. Draw-Tite
  3. Hitch Extender
  4. Fits 2 Inch Hitch
  5. 18 Inch Extension
  6. 3500 lbs
Draw-Tite Hitch Extender for 2" Hitch Receivers - 18" Long

Draw-Tite Hitch Extender for 2" Hitch Receivers - 18" Long

Item # HE18
Retail:$115.26
Our Price: $76.58
You Save: 34%
Hitch Adapters
Shipping Weight: 12 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Extend your trailer hitch receiver opening so that your can clear your spare tire when using your hitch-mounted bike rack or so that your trailer won't hit a rear-mounted propane tank when you make sharp turns. Powder coated steel resists rust. 1-800-940-8924 to order Draw-Tite hitch adapters part number HE18 or order online at etrailer.com. Free expert support on all Draw-Tite products. Great prices and Fastest Shipping for Draw-Tite Hitch Extender for 2" Hitch Receivers - 18" Long. Hitch Adapters reviews from real customers.
  • All Info
  • Reviews (165)
  • Q & A (0)
  • Photos

Draw-Tite Hitch Adapters - HE18

  • Hitch Extender
  • Fits 2 Inch Hitch
  • 18 Inch Extension
  • 3500 lbs
  • Bike Racks
  • Cargo Carriers
  • Hitch Mounted Accessories
  • Trailers
  • Draw-Tite

Extend your trailer hitch receiver opening so that your can clear your spare tire when using your hitch-mounted bike rack or so that your trailer won't hit a rear-mounted propane tank when you make sharp turns. Powder coated steel resists rust.


Features:

  • Extends your trailer receiver opening out from the rear of your vehicle to avoid obstacles
    • Get extra clearance for your trailer
    • Mount your bike rack without having to remove your rear-mounted spare tire
  • Extends hitch 18" from center to center of hitch pin holes
  • Black powder coat finish
  • Hollow on both ends


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Maximum gross trailer weight: 3,500 lbs
  • Maximum tongue weight: 350 lbs
  • Overall length: 22-7/8"
  • Distance from center of hitch pin hole to the center of the hitch pin hole: 18"


Note: Not for use with a weight distribution system. The limiting factor is the capacity of your hitch. Using an extender will reduce your hitch's overall capacity by 50 percent.




80306 Draw Tite Hitch Extender for 2" Trailer Hitch Receivers - 18" Long




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Draw-Tite Hitch Extender for 2" Hitch Receivers - 18" Long - HE18

Average Customer Rating:  4.8 out of 5 stars   (165 Customer Reviews)

Extend your trailer hitch receiver opening so that your can clear your spare tire when using your hitch-mounted bike rack or so that your trailer won't hit a rear-mounted propane tank when you make sharp turns. Powder coated steel resists rust.

by:

I was surprised by just how solid and heavy it was made.
Just what I needed to move my Bobcat UTV hitch back to I can use it as my yard dog to shift my trailers around and not worry about the plastic tailgate nor the plastic bed getting damaged.
The hitch sits under the bed and this extends it out so it is useable.

Bob

10/24/2022

After one year its still one of the best upgrades I have done to my Bobcat UTV. The only thing I have added is installing two anti-rattle hitch tighter to take out the rattle from the hitch extension and the ball hitch when I dont have a trailer connected.



by:

The hitch extension worked perfect. The only one that was 18" pin to pin which was exacty what I needed to make this combo work.
Dual hitch to start. Top whole a luggage rack to haul coolers and the bottom for the bike rack.
Thanks etrailer.



by:

I needed the hitch extender because I added a 9'6" camper on to my truck and I pull my jeep trailer with truck. I trussed the extender back to frame.



by:

I’m using this extender to get past my Go Aero gear space on my RV. I think it could use a way to attach the safety chains and brake away wire but I’ll figure something out



by:

Perfect for our new flatbed camper.



by:

IT WORKS BUT NEEDS A SUPPORT BRAKET TO PREVENT IT FROM SHAKING.



by:

very well made, is as described except does not have the smaller hole for a narrower hitch pin or lock that the picture shows, so is not exactly as pictured. discovered after I received it that it could be vastly improved. the addition of a couple "ear loops" on the sides would greatly simplify use of safety chains. the existing safety chains could go from the trailer hitch to the loops and then new short safety chains from the loops to the vehicle. otherwise, one has to modify the existing chains as they are too short, by adding or replacing chain, and then one ends up with some pretty long safety chains

Etrailer Expert

Sierra K.

9/7/2021

This item has been updated without the smaller hole. We are in the process of getting new photos together for the item. I apologize for the confusion. Also, our extenders do not have safety chain loops. Extenders cut the weight capacity 50 percent, so for safety purposes, you will have to use the loops on the original hitch.



by:

I tested it on the Jeep and the Stowaway 2 in storage. It works perfect to create clearance with the extra wide spare tire

Etrailer Expert

Mike L.

9/15/2022

We are delighted that you are happy with your purchase! Just be aware that using an extender such as this will lower the towing and tongue weight capacity of the hitch by half, due to the extra leverage moving the load rearward will cause.



by:

Bought some tail light lenses for my fishing boat trailer good price came quickly Great service put a bike rack also easy to put together takes minutes to put on and takeoff rack $200 cheaper than my neighbor same bike rack then I bought a ball hitch extension 18 inch to keep my wrangler that we Toby hind the motorhome from hitting the back bumper when I make a sharp turn I’m sure that should take care of the problem everything I bought from the trailer our quality products quality service and everything they ship always comes on time personally I think etrailer rocks



by:

Excellent quality - not a scratch on it when received. The welds appear to be very good. Delivered very quickly.
Didn't rate it excellent only because it lacks rings near the end for safety chains. On the other hand, one extension I found had rings (2 sets of rings - one for vehicle to extension, another from extension to trailer), but it cost nearly $200, and had the same weight rating as this one. As received, the safety chains have to be very long, but for the difference in price, (64 vs 200) I could have rings welded on if needed..



by:

This works perfectly for my application which was to tow a trailer with my tailgate down. Does lower your towing capacity by a fair amount, but for trailers with low tongue weights this isn’t a big deal.



by:

Needed a hitch extension for Gator 825I this piece fit perfectly not a cheap add on 5stars definitely

Delbert

12/14/2018

Still working like it was designed for thanks again



by:

This extension worked great to allow me to fit my bike rack (4 bikes) between my SUV and pop-up camper. Without it, the propane tank, battery and tongue crank were in the way and prevented me from getting the bikes on the rack. It's rock solid, trailer tows the same as with no extention.



by:

Great products and wonderful service!



by:

Received HE18 receiver extension on the date promised by etrailer (actually a few hours earlier than scheduled). Installation was a breeze and the extension is a quality product. Also contacted etrailer, via email, for advice on some related additional products I may wish to purchase ... the response was quick and clearly written.

Good service, good product.



by:

Quality, fits well, exactly what I needed!
This
extends the reach of my hitch on a Yamaha golf cart, under a rear-facing seat. I added an E-trailer step to make it easy for people to step onto the rear platform.



by:

Works just as advertised, needed this to extend the hitch out farther so I could pull my sprayer behind a John Deere Gator, works great, gets the hitch out from under the vehicle. Can't say enough about the great service from etrailer, ordered, and they upgraded my shipping to quicker service, great communication during the process, will do all my trailer accessories buying from them from now on!!! Thanks



by:

Looks like just what the doctor ordered, I'll need to see if my bike rack will work with it

Mike L.

6/8/2017

works great, completely satisfied



by:

The extender is fine, although I had to do a work around. The female end of the extender is not deep enough The 5/8 inch holes of the tow bar will not line up with the 5/8 inch holes of the extender. I must use the 1/2 inch hole of the extender. And you only gave me 5/8 inch pins. The 1/2 inch I own is not long enough to go all the way through the extender. The work around was to buy a 1/2 x 4 inch bolt and nut. Not ideal, but it works.



by:

You cannot beat the customer service and the quality of their products. It's not often anymore you find people who really care about you as a customer. These people care and their products are the best. I bought the 18 inch hitch extension and it is exactly what I needed. They even upgraded my shipping. I will recommend them to my friends and you can bet I will use them in the future. I wish them all the success in the world.



by:

Works 100% as advertised. I use it to extend my bike rack past my new rear mounted spare. I’ve put in thousands of highway miles and some off road with bikes. Zero problems.



by:

Order/communication/shipping was awesome. Ordered Sunday night and got an email from a rep saying it was received. An hour later another email from another rep said it was in stock and would ship shortly. Shipping email came that same night, and product arrived in 3 days as expected. Product is very solid, just as spec'd and fits my need perfectly. Only negative is it is doesn't have safety chain hooks which will have to be welded on.



by:

Found exactly what I was looking for at etrailer. I purchased an 18" hitch extender to aid in launching my skiff. I paid for 3 days shipping and it arrived in 3 days along with the accessories I ordered. All products very well made and did the job.



by:

Exactly what I needed for towing my jet ski. The extra length makes it much easier to back up, as before the ski trailer was very prone to jackknife.



by:

This extension work great on my truck it gave the need space to keep my cargo box on my truck and still tow my trailer


25
165
Show More Reviews

See what our Experts say about this Draw-Tite Hitch Adapters

  • Can Hitch Extender Allow More Clearance Between Trailer for Tighter Turning
    Hitch adapters like the part # HE18 will definitely add clearance so that you can turn sharper but due to the length and added movement they do cut the capacity of the hitch they are installed in by 50 percent. Typically, we recommend longer ball mounts like the # BM20 instead if possible.
    view full answer...
  • Can the HitchMate Threaded Trailer Hitch Receiver Lock be Used on the Hollywood Racks Sport Rider
    I would love to help but it sounds like you are trying to use the HitchMate Threaded Trailer Hitch Receiver Lock part # HE6001 on both the Hitch Extender part # HE18 and your Hollywood Racks Sport Rider SE2 part # HR1450Z. If that is the case then we do not offer any solutions that will allow you to do this. The first issue as you mentioned is that there would need to be a nut welded inside the hitch extender in order for the threaded hitch pin lock to work for you. The threaded hitch...
    view full answer...
  • Hitch Extender Recommendation for a Can Am Commander for Salt Spreader
    If your Can Am Commander has a 2 inch hitch the hitch extender that would most likely work best for you would be the # HE18. This product has more than enough capacity for your spreader, but you should note that when you use a hitch extender like this you end up cutting the capacity of the hitch in half due to the additional leverage created. You will need to make sure the hitch on your Commander has at least twice the capacity for the weight of your salt spreader. Especially if your...
    view full answer...
    Image 1 for Image 2 for
  • Using Two 18 Inch # HE18 Hitch Extenders to Launch and Retrieve Sailboat
    The answer to your question will depend a lot on how much the tongue weight of the boat/trailer is. Using more than one extender is not something we recommend, because using one will lower the tongue weight capacity of the hitch by half. Adding another extender will bring the tongue load out to 3 feet rearward of the point where the first extender pins into the receiver, and at that point there would be an unknown amount of leverage applied to your hitch, and I couldn't say what the tongue...
    view full answer...
  • Bike Rack Recommendations for a 2010 Suzuki Grand Vitara With Rear Mounted Spare Tire
    One thing to keep in mind when using a hitch extender like part # HE18 is that the overall weight capacity of your trailer hitch will be reduced by 50 percent due to the additional leverage that is applied by the hitch mounted accessory sitting further away from the trailer hitch. If you have a class II or class III hitch on your 2010 Suzuki Grand Vitara, then the tongue weight capacity of your hitch is most likely 350 lbs. When you use a hitch extend it will be reduced to 175 lbs. The...
    view full answer...
  • Which Extension For Towing Boat Trailer With Truck Bed Camper In 2019 Chevrolet Silverado 1500
    The longest extension available that will work with the factory trailer hitch receiver on your 2019 Chevrolet Silverado 1500 is the Draw-Tite Hitch Extender for 2" Hitch Receivers - 18" Long # HE18. You will need to measure from the center of the hitch pin hole on your trailer hitch receiver to the edge of your truck bed camper to see if this extension is long enough. Keep in mind that a hitch extender like the # HE18 will reduce your trailer hitch receivers capacities by 50%, and has...
    view full answer...
    Image 1 for
  • 24 Trailer Hitch Extender For 2 Inch Hitch Receiver
    There is only one option for a 24 inch hitch extender that fits in a 2 inch receiver, the TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 24" Long # TLE1524. Technically this is for TorkLift SuperHitch dual-receiver trailer hitches but you could use just the top portion if you really wanted to do so. This may be more than you were looking to spend for an extender but I did want to at least mention there was an option for you. Otherwise, the longest standard...
    view full answer...
  • Hitch Receiver Extension to Clear the Rear Hatch on a 2019 Chevy Tahoe
    I recommend using the Curt Extender for 2" Receivers -18" Long item # C45796. This is our longest 2 inch receiver extension that can fit inside a standard hitch receiver.
    view full answer...
  • Recommendation for Adding an Extension Between 2010 Dodge Ram 1500 and Boat Trailer
    The Extension # HE18, is the longest extension we have. The 18 inches is from the center of the hitch pin hole on the hitch out to the center of the hitch pin hole on the receiver portion of the extension. You would then have a ball mount in the end of the receiver which will add even more length. But there is an issue that you will need to be aware of. Using a hitch extender will reduce the tongue weight capacity of the hitch by 50 percent. Using an adapter or extension is acceptable...
    view full answer...
  • Can I Use an Extended Ball Mount w/ a Hitch Extender?
    Yes, you can use the Hidden Hitch Ball Mount item # 80232 with the Draw-Tite Hitch Extender for 2" Hitch Receivers - 18" Long item # HE18. Using this hitch extender will however reduce the capacity of the hitch on your 1999 F-350 by 50%. I recommend using the Buyers Products Hitch Extender w/ Step - 2" Hitch - 18" Long item # 3371804017. It is the same length of 18" but will only reduce your hitches capacity by 1/3.
    view full answer...
  • Will The Hollywood Racks SR2 Bike Carrier Interfere With My Backup Camera On My 2016 Jeep Wrangler?
    Spare tire bike racks like the Hollywood Racks SR1 2-Bike Carrier - Spare Tire Mount # HRSR1 that you mentioned, will require you to have to remove your backup camera for installation. The only way around this is to use a hitch mounted bike rack like the: -Kuat Beta Bike Rack for 2 Bikes - 2" Trailer Hitches # B202-2. If you don't have a hitch already, you can use the etrailer Trailer Hitch Receiver # e98856. The Kuat Beta bike rack has a maximum carrying capacity of 40-lbs per bike,...
    view full answer...
  • Trailer Hitch Extension for 2 Inch Hitch on 2019 Audi Q8
    I can certainly understand wanting to keep the wheels of your 2019 Audi Q8 out of the saltwater, and while there are hitch extenders that will add distance, there isn't a 36 inch extender that will work. The longest hitch extender is 18 inches, and there are a couple available that will work with a 2 inch hitch: the Curt Extender # C45796 and Brophy Hitch Extender # HE18. To secure any of these extenders to your hitch you will also need the Pin and Clip # PC3 if you do not have one already.
    view full answer...
  • Can Yakima EXO Enclosed Cargo Carrier # Y62VR Be Used with Hitch Extension
    The Yakima EXO Swing Away Enclosed Cargo Carrier - 2" Hitches - 10 cu ft - 100 lbs # Y62VR is only approved to be used with the Yakima StraightShot 2" hitch extender # Y69VR. It cannot be used with outher hitch extenders. Keep in mind that if your use a hitch extender with any carrier, it cuts the capacity of you hitch in half.
    view full answer...
  • Cargo Carrier and Bike Rack for a Truck With Truck Bed Camper
    I have a solution for you, but unfortunately, there's not an exact item for what you are looking for. Prior to purchasing a hitch extender, I recommend measuring your clearance. You'll simply measure from the center of the hitch pin hole on your hitch to the furthest point in a straight line away from the hitch. Any extender you use will need to cover at least this distance to be useable. If you are at exactly 18 inches, then I recommend the Tow Ready Hitch Extender for 2 inch Hitches,...
    view full answer...
  • Can Hitch Reducer Be Used for 2 Inch Weight Distribution Shank in 2-1/2 Inch Hitch
    You certainly can! I'd recommend a reducer sleeve like part # BWRHXA2182 which is designed for this purpose. This reducer has pinched ends to prevent it from sliding into the 2-1/2 inch receiver too far, so it'll be easy to line up the hitch pin holes. A reducer sleeve might allow slight movement of the shank, but the spring bars will put enough leverage on the weight distributing shank that this shouldn't be an issue. I've linked to a product demonstration video featuring the reducer...
    view full answer...
  • Do Hitch Extenders Work Without Capacity Reduction When Flat Towing
    For flat towing purposes the capacity of the hitch does not get reduced that same since the 4 wheels being on the ground prevents vertical tongue weight from being put on the hitch. We sell high-low adapters that work in a similar way and they do not reduce towing capacities either. If you need 18 inches of extension the part # HE18 that you referenced would work well for this.
    view full answer...
  • Longest Hitch Extension Available for 2" Trailer Hitch
    The longest trailer hitch extender for a 2" trailer hitch is 18", the Hitch Extender For 2" Trailer Hitch Receiver 18" part # HE18. If you were to go any further than this then the weight capacity of the trailer hitch would be reduced so far you wouldn't be able to support even a small trailer.
    view full answer...
  • What Hitch Extender Do I Need for My 2017 Jeep Wrangler?
    The reason why it is important to consider whether you need a hitch extender adapter on your 2017 Jeep Wrangler is to make sure that any hitch-mounted accessories will not interfere with the rear spare tire. For most hitch-mounted accessories, we include the dimensions of the closest part of the accessory from the center pin hole of the hitch. For accessories that have multiple measurements available such as the Kuat NV 2.0 Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount # NV22B, you...
    view full answer...
  • Will Using a Hitch Extender Help in Carrying a Motorcycle and Tow a Camper With a 2006 Chevy Truck
    A hitch extender, like part # HE18, will allow you to move the hitch point 18 inches from the your OEM trailer hitch on your 2006 Chevrolet Silverado. However, the draw back of using a hitch extender is it will cut your hitch's over all capacity by 50 percent. With the weight you plan to haul in your truck bed and the added camper, a hitch extender will not work. I recommend going with an extended ball mount, like # BM20. This mount will give you a length of 13-1/4 inches from the center...
    view full answer...
  • Hitch Extender For A Pontoon Boat Trailer
    The swing away extenders are for the use of bike racks and cargo carriers only. They're not meant for towing use. You will need to use an extender like The Draw-Tite Hitch Extender # HE18 this can be used on any standard 2 inch receiver, or you can use The Fulton Fold-Away Coupler Hinge Kit # FHDPW330300 which allows you to create up to 48 inches of foldaway tongue for your trailer. It will fit a 3 inch by 3 inch trailer tongue. Using this extender will extend your hitch 18 inches from...
    view full answer...
  • How To Tow Small Boat Trailer and Carry Bike Rack With Class A Motorhome
    I have a few options for you, but you using a hitch extender like the Tow Ready # HE18 you were looking at with a dual receiver like the Malone 2" Dual Receiver # MPG544 will reduce the capacities of the trailer hitch receiver on your Class A Motorhome so low you will not be able to tow a trailer. Instead I recommend either adding a front mount trailer hitch receiver to the front of your motorhome to carry the bike rack, or using the Curt Multipurpose Ball Mount with 2" Receiver for Bike...
    view full answer...
  • Trailer Hitch Extension For Bike Rack To Clear Opened Tailgate On Toyota Tundra
    You will find that opening a tail gate all the way is just not possible with a hitch mounted bike carrier on a pickup truck. Since the tail gate extends so fat beyond the bumper when opened it would require a bike carrier to almost lay flat. Using any adapter or extension in your trailer hitch will reduce the capacity of the trailer hitch by 50 percent. An adapter like part # 80300 would extend the hitch and possibly give you the clearance you need for your Kuat bike carrier. This extension...
    view full answer...
  • Extension of Curt Clevis Trailer Ball Ball Mount # C45005 Used With Hidden Hitch # HE18 Extender
    I'm assuming you're speaking of the Curt 1-7/8 ball and Clevis Mount, part # C45005, is that correct? If you were to use the # C45005 in combination with the # HE18, you would indeed get 24 inches of extension, measured from the hitch pin hole in the receiver hitch o your EZ-GO cart tot he trailer ball on the # C45005. However, using the extension will lower the tongue weight capacity of the hitch by half. I've provided a photo showing the dimensions of the two parts when used together.
    view full answer...
    Image 1 for
  • Why Does Use of Hitch Adapter/Extender Reduce Hitch Tongue Weight and Trailer Weight Ratings
    Any type of hitch adapter or extender will have the unavoidable side-effect of causing a loss of about half of your hitch's rated capacity, both its tongue weight (TW) and it's gross towing weight (GTW). Hidden Hitch extender # HE18 and Curt Hitch Extender # C45791 both cause a loss of capacity because they change the geometry of the hitch set-up. The added length of the adapter will allow greater leverage to be applied to the hitch tube by the attached trailer or accessory; this is what...
    view full answer...


< Previous
123. . .4



Do you have a question about this Hitch Adapter?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Brandon M
Expert Research:
Brandon M
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Michael B
Installed by:
Michael B
Employee Adam E
Installed by:
Adam E
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.