Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke
(811 reviews)
Price: $36.58
In Stock
Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke
Item # BV0554-03
Retail:$60.64
Our Price: $36.58
You Save: 40%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (811)
- Q & A (0)
- Videos (2)
- Photos
Ventline RV Vents and Fans - BV0554-03
- Replacement Lid
- Roof Vent
- 14W x 14L Inch
- Tinted
- Ventline
- Plastic
Replacement smoke colored vent cover for Ventline old-style rounded dome trailer roof vents.
Features:
- Replacement cover for 14-1/4" x 14-1/4" roof vents
- Domed cover
- Easy to install and operate
- Smoke color
- Made of a polypropylene plastic
- Fits standard Ventadomes and post-1995 Elixir trailer roof vents
- 2-Year limited warranty
BV0554-03 Ventline Replacement Smoke Dome Assembly for Standard Roof Ventadomes (old-style, rounded dome)
Replaces 61271, 63115
Video of Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Ventline Smoke Plastic Enclosed Trailer Vent Cover Installation
Today on this enclosed trailer, were going to install part number BV0554-03 from Ventline. This is a Ventline rounded dome in a smoke color. To start off well go ahead and remove the trim panel at the very bottom. Next well go ahead and remove the screen and also the crank handle as well. Once we have those parts away, well go ahead and reinstall the handle temporarily and raise the lid up, so we can remove it easily. Now well go ahead and then unscrew the crank assembly from the crossbar and then we can go ahead and release it from the lid.
Well slide the arm down towards an open slot at the bottom and then we can go ahead and release it. We got completely loose from the crank, now well go up top and go ahead and remove it from the vent. Well go ahead and open it up and you can see theres a small tab on the inside edge of the hinge and usually these are twisted to the inside, so we just have to untwist it and then it can slide it off. Now we can go ahead and slide on our new vent cover and then basically reinstall it in reverse order. Well go ahead and put our crank assembly up into place and line up the arm with the vent dome, put it into track and then well go ahead and reinstall the crank arm to the vent.
Then we can reinstall our screen and then our trim ring around the edge. In just a few steps the old one has been removed and our new one has been installed. Thatll finish it for part number BV0554-03 on this inclosed trailer. .
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Did not arrive in time
Customer Reviews
Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke - BV0554-03
Average Customer Rating: 4.9 out of 5 stars (811 Customer Reviews)
Replacement smoke colored vent cover for Ventline old-style rounded dome trailer roof vents.by: Randy K02/04/2017
My experience with etrailer could not have been better. Their online catalog had very good pictures and product description, so I was confident the I was ordering the right item for my application. Pricing was competitive. George J emailed me after I placed the order to let me know he upgraded my shipping so I could get the product sooner. The vent covers came well packaged and undamaged. Now I need to install them on my vintage 1964 Airstream Overlander, which I bought several years ago and rehabilitated. The white plastic vent covers I installed several years ago became brittle and crumbled. I hope the smoke colored ones I bought from etrailer will last a bit longer, but the price was so fair I bought an extra pair for the next time.
by: Debbie 10/08/2022
The roof vents that I purchased was exactly what I needed! The shipping was fast. I installed them myself yesterday and it was pretty simple! I have purchased from etrailer.com before and have been very pleased with my purchases! Thank you!
Debbie
10/9/2023
The vents that I purchased are perfectly fine after a year! Thank you!
Mike L.
11/2/2023
@Debbie Awesome, that's great to hear!
by: Robert 04/22/2024
Just what I ordered and expected. Perfect replacement
by: Paul10/06/2020
Called to get help ordering the vent cover to make sure I ordered the right part. Hally was extremely helpful. Got the part quickly. Hally had shown me where to go to watch an installation video. After watching it, installation was very easy. Pictures show the before and after. Thanks!
by: Mark05/05/2019
Quick simple fix to replace a vent cover lost to the weather. Installation took less than 5 minutes, product fits like the original. William B. made finding and ordering the right part a breeze.
by: Den 10/18/2023
Great quality part that fits great. This cover lets in more light than the original one on my Rockwood trailer which I like. Install was easy after watching the video on Etrailer.
by: Lloyd12/21/2020
I have a 16ft 1972 Brougham travel trailer,and my old vent lid disintegrated.I wasn't sure which vent lid to get.I measured the square hole on the roof and it is 13 inches square. I also needed to be sure of the hinge.The hinge portion on the vent cover is 9 inches.After I removed the screws from the vent lid raising mechanism, and disconnected it from the vent lid rail,I went up top,and opened up one side of the rolled metal hinge.Then the roof vent lid slides off to one side.Then you just slide the new roof vent lid onto the hinge,and bend down the tab to secure it.You then reattach the mechanism inside the trailer.Its actually very easy to do,with just a Phillips and straight slot screwdriver. I attached photos of what remained after my lid was blown off completely which shows the hinge and lifting rail that come with a new roof vent cover attached.I also showed a close up of the hinge and the little tab that is bent in on both sides to keep the lid from sliding sideways. Finally I have pics of the new lid installed.I was happy with this product,and didn't realize you could just replace the vent lid so easily.
by: Wm05/04/2024
fast service looks like OEM replacement, easy install
by: Don10/29/2021
The vent cover is a quality replacement almost identical to the OEM on 2018 Windjammer. The OEM had severe ultraviolet deterioration and had a crack in the top center area and a possible hail damage on an outer edge outside of the seal. Had not leaked inside yet! We will see if this one will last any longer than the OEM’s 3 - 4 years.
Don
10/30/2022
One year later vent is doing it’s job. No failure.
by: Jonathan 07/02/2023
eTrailer is an amazing company to work with. They are extremely helpful when it comes to finding the part you need, and then when the part arrives … their installation videos make the process so easy to complete!
by: Stephen 05/09/2023
I bought a new set of the smoke vent covers to replace the same vent covers purchased 8 years ago. Trailer has been sitting for 4 years and didn't want to have a problem with them on our trip next week, so I purchased these as preventative maintenance since the trailer has been sitting in the sun for all of that time. For some reason the smoke covers have had a considerably longer life compared to the white ones which for me only lasted 2 years. Standard shipping was fast, and the vent covers were well packaged. Will buy from etrailer again!
by: Bruce M.07/12/2014
This is just what I was looking for. It only took a few minutes to assemble and put on my Airstream camper, and it looks so good.
The price was great and very fast shipping. I will bookmark your website and buy from you again when the need arises. Thank you very much.
by: Bruce 01/06/2024
All of my orders over the past few years have been reasonably priced and of good quality. I am totally satisfied with the quick delivery and options for shipping.
by: Mike 01/23/2024
Already installed, so easy to replace. Exact fit.
by: Paul 12/18/2023
Fits perfectly easy to install
by: Ed07/14/2023
Fits a 2016 Forest River Wolf Pup just right and wasn't too difficult to change out. Thanks!
by: Robert V07/26/2013
Replaced two weather beaten, cracked vents. Easy installation just follow the directions. Took about 10 minutes each looks better then the old white ones.
by: michael11/15/2021
Purchased this vent replacement a year ago and it’s working great and holding up to the weather.
by: Tim 06/23/2023
Love dealing with e-trailer always the right parts at a fair price and great customer service over the phone.
by: Kenneth 11/16/2023
perfect fit holding up supper good no issues - good durable quality
by: Jimmie B. 02/03/2014
I will faithfully give your Company my business I just hope it is not too frequent. Long story short the part worked just as it should. I also need to order a new hand crank because the a one is defective.
by: SK09/09/2016
Great product and fits perfectly on my 2007 Keystone Raptor 3612DS Toy Hauler.
Smoke color adds a nice touch and overall looks better.
Superfast shipping much appreciated!
Thanks again
SK
by: Dave L06/03/2017
Took about two minutes to install, should of replaced sooner. Nice price and fast shipping. Looks good.
Dave L.
6/3/2018
It has been working great, summer keeping rain out and winter storage keeping snow out. Great product.
by: Katysdad06/15/2016
Great service, great price, simple to do!!a second grader could do it!
Katysdad99
6/15/2017
Vent has been excellent! Even after cooking in the Florida sun for 2 months of summer and then the north Georgia cold winters with ice and a little snow!
by: Mark11/13/2022
I have an older Car Mate car trailer. The roofvent was very bad. I wasn’t sure about being able to get an exact replacement. Measurements were the same, so I ordered one. It arrived within a few days. I was able to install it in a few minutes. The crank open still works great and no more leaks. I highly recommend this product and also etrailer, as I have purchased other perfect fitting parts from them. ….Mark
25
811
Show More Reviews
See what our Experts say about this Ventline RV Vents and Fans
- Replacement Vent Cover with a Continuous Hinge Needed The item you are looking for is know as a continuous hinge vent cover. I suggest either # BV0554-03, that is a replacement cover for a 14-1/4 by 14-1/4 inch vent in smoke. Or, the # BV0554-01, in white. I do suggest that you verify the dimensions of your vent before ordering to ensure that the 14-1/4" x 14-1/4" is correct size.
view full answer...
- Replacement Roof Vent Cover for Fantastic Vent 8000RI do have a solution for you, but I don't have information with any certainty as to what type of hinge the Fantastic Vent 8000R uses. However, most newer fan vents that are 14-1/2" x 14-1/2" will use a continuous hinge, so the correct replacement roof vent cover for you should be part # BV0554-01 for white or part # BV0554-03 for smoke. I've linked a photo that shows the different types of hinges that you might find; if you have something different on your Fantastic Vent then just let...
view full answer...
- Replacement Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof VentsThe best way to go about this is to determine what you currently have on your 2011 Forest River Sunseeker Motorhome. Is the manufacturer listed on the current vent? The most common size used by OEM's in recent years is the 14-1/4" by 14-1/4" but please verify this on your specific model. If there is a rolled metal hinge attached to the vent cover like on the Ventline Replacement Smoke Dome Assembly, # BV0554-03 then I would select this.
view full answer... - How to Pick Out Replacement Roof Vent Lid for 2005 Homesteader Hercules TrailerMost likely we have what you are looking for but you will need to first determine what vent you have on your trailer. The best way to find the correct replacement vent cover for your cargo trailer is to measure the vent. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name is on the vent that will help. Finally, you will need to look closely at the hinged portion of the vent. If there is a rolled metal hinge attached...
view full answer...
- Replacement Roof Vent Lid for Avion 5th Wheel 1993Thanks for the picture of the roof vent assembly you need a replacement lid for. Based on that you'd need Ventline Old Style Rounded Dome Trailer Roof Vents - White # BV0554-01 or Smoke # BV0554-03. I attached an install video for this for you to check out as well. The larger hole size you mentioned that is over 21 inches doesn't quite match the pictures though so if you have a second roof vent that's longer we wouldn't have a solution.
view full answer...
- How to Choose Proper Replacement Roof Vent Lid for 2017 Forest River Cherokee 304BHThis happens all the time, no worries! You can indeed get a replacement lid, it's just a matter of matching up what's remaining on your roof to the correct replacement lid, which isn't difficult at all. A standard vent has a 14x14 inch opening, and can have a 3-point, 4-point or a continuous hinge. To find the correct replacement, use the provided link. On the left side of the page, click the filter for the hinge style you have, then choose the color you want. I've also linked you to...
view full answer...
- Replacement Vent Lid for 13" x 13" Vent Opening with Continuous HingeSounds like the vent cover you need is the replacement for Ventline Old-Style Rounded Dome Trailer Roof Vents which comes in Smoke # BV0554-03 as well as White # BV0554-01. These have the continuous hinge and fit the standard 14" x 14" vents. Sometimes the measurements are a little weird depending on where you measure but I've never heard of a 13" x 13" vent opening before which is why I recommend the ones above for the 14" configuration. Attached is an installation video of this vent...
view full answer... - How to Find Replacement Roof Vent Cover for 2004 Coachmen TrailerWe do have a large selection of replacement RV roof vent covers available. In order to choose the correct replacement, I first recommend measuring your vent. Most vents have a standard measurement of 14-1/4 inches x 14-1/4 inches or 14 inches x 14 inches. If you are able to locate the manufacturer/brand of your vent, this will also help in narrowing down the possibilities. Lastly, you will want to look at the hinged portion on your existing vent. For example, the Ventline Vent Cover...
view full answer...
- Replacement Vent Cover For Ventline AS-13-M-V101I reached out to my contact at Ventline and confirmed the correct replacement cover for your Ventline AS-13-M-V101. The replacement cover you want is # BV0554-01 in white or # BV0554-03 in smoke. I've attached video reviews of each of these as well as an installation video to assist. Part # BVD0449-A01 you mentioned is not a fit for your application.
view full answer... - How to Pick Out Vent Cover Replacement for 2001 MontanaMost likely we have what you are looking for but you will need to first determine what vent you have on your trailer. The best way to find the correct replacement vent cover for your cargo trailer is to measure the vent. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name is on the vent that will help. Finally, you will need to look closely at the hinged portion of the vent. If there is a rolled metal hinge attached...
view full answer...
- Locating Replacement RV Vent Lid For 2014 Winnebago View 24MWe have a large selection of replacement lids for RV roof vents available. In order to pick out the correct replacement for your vent, you will first want to measure the vent itself. Most standard vents are 14 x 14 inches in size and fit into an opening of 14-1/4 inches x 14-1/4 inches. You will then want to note the hinge style on your existing vent. There are three types of vent hinges; 3-point, 4-point and continuous. I have attached an image that shows examples for each hinge style....
view full answer...
- How to Pick Out Replacement Roof Vent Cover for TrailerMost likely we have what you are looking for but you will need to first determine what vent you have on your trailer. The best way to find the correct replacement vent cover for your cargo trailer is to measure the vent. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name is on the vent that will help. Finally, you will need to look closely at the hinged portion of the vent. If there is a rolled metal hinge attached...
view full answer...
- Replacement Roof Vent Lid for Trailer with Older Dome Ventline Roof VentJudging by the picture you sent in it looks like you are in need of the Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents # BV0554-03. The picture is a little grainy though so you would want to this cover out and make sure it matches.
view full answer...
- Recommended Roof Vent Cover for a Trailer with Continuous Hinge The industry standard size for a roof vent is 14" wide x 14" long. This roof vent you have now appears to match the industry standard and since you have a continuous hinge, I recommend using the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents part # BV0554-01 for white or part # BV0554-03 for smoke. This cover should be a direct replacement for your roof vent through I do recommend taking a quick measurement of the opening just to be sure. I have attached an installation...
view full answer...
- Recommended Replacement Trailer Roof Vent Lid for 2006 Palomino Pony CamperIn order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on...
view full answer... - How To Find the Correct Replacement Lid for a Vent Fan on a 2018 Forest River Cedar Creek 8289WSIf you remove the screen on your vent assembly there should be both a brand and model number listed. If you can provide this then I can give you the correct replacement lid. If not your only other option would be to remove the vent lid you have now and pay attention to the hinge. If it is a continuous hinge like the photo I have attached for you then you can use the Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents part # BV0554-03. The Replacement Lid for MaxxFan and MaxxFan...
view full answer...
- Replacement Lid for 14 x 14 Ventline Trailer Roof Vent Model AS13M-V101 We offer 14 x 14-inch trailer roof vent covers in many colors and styles. Based on your Ventline part number AS13M-V101 you can use either white lid # BV0554-01 or smoke lid # BV0554-03. Both feature a continuous type metal hinge, which is shown in the linked image. So long as this is your hinge type either replacement lid will work fine for you.
view full answer...
- How to Pick Out Replacement Vent Cover for a TrailerMost likely we have what you are looking for but you will need to first determine what vent you have on your trailer. The best way to find the correct replacement vent cover for your cargo trailer is to measure the vent. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name is on the vent that will help. Finally, you will need to look closely at the hinged portion of the vent. If there is a rolled metal hinge attached...
view full answer...
- Need Replacement Roof Vents for a SunyBrook Titan 38BQS TrailerThe size of most roof vents on campers measure at 14-1/4 x 14-1/4 inches. This measurement is the length and width of the vent. The part you referenced # BV0554-03 may be the correct size, but there are different styles of hinges that you will need to know before purchasing. There are 3-point hinges, 4-point hinges, and continuous hinges. Cover # BV0554-03 fits 14-1/4 square roof vents and has a continuous hinge. Unfortunately, there is not a master parts list where I can look up your...
view full answer...
- Replacement Roof Vents For 1987 Hitch HikerThere is not a cross reference to tell you what vent cover you have but fortunately there are few choices. If the vent itself still works fine, but your cover/lid is cracked or otherwise damaged, that is a quick fix. The first thing you need to do is measure your roof vent opening (not the cover itself). The standard vent opening size is 14-1/4" x 14-1/4". Next, determine the hinge style. It will be 3-point, 4-point, or "continuous hinge." Finally just pick your color. If your Hitchhiker...
view full answer...
- Replacement Non-Powered Roof Vent Cover Options for an Itasca Sundancer Travel TrailerI have located three possible solutions, including the option you originally requested for your Itasca Sundancer. We have three non-powered roof vent covers that may work for you. I attached a photo showing covers and dimensions for you to make the correct selection. For the Ventmate, (discontinued) 69284, that you originally asked about, I have given you the hinge dimensions as well as the center dimensions. For this part the hinges are molded plastic. Another option we offer is the...
view full answer...
- Replacement Vent Lid For A Ventline RV Roof Vent VB0568 Based on your VB0568 part number you would need the Ventline Old Style Rounded Dome Trailer Roof Vents # BV0554-01 for white, or # BV0554-03 for smoke. These lids have a continuous hinge so I recommend doublechecking your design just to be sure that it matches since the info on older Ventline models isn't always accurate. You could also use the Replacement Lid # A10-3375 (white) or # A10-3376 (black) as well since they come with a bolt-on hinge instead of using your current hinge.
view full answer... - Which Plastic Roof Vent Lid Would Fit Ventline Ventadome Trailer Roof Vent # V2110SP-24For a plastic roof vent lid replacement for the Ventline roof vent part # V2110SP-24 you'd want the part # BV0554-03 for a smoked lens or # BV0554-01 for white.
view full answer... - How to Determine Which Trailer Roof Vent Cover will Fit a TrailerIn order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on...
view full answer...
Do you have a question about this RV Vents and Fan?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Isabelle B
Updated by:
Manda E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Randy K.
2/4/2018
So far so good!