Need Replacement Roof Vents for a SunyBrook Titan 38BQS Trailer

Question:

I have a sunnybrook titan 38BQS and cant find what size replacement roof vents are installed. My camper is at the campground which is closed for the season. Its fully covered but I need to replace asap . Does anyone know ? I cant find any info online .

asked by: Shawn

Expert Reply:

The size of most roof vents on campers measure at 14-1/4 x 14-1/4 inches. This measurement is the length and width of the vent. The part you referenced # BV0554-03 may be the correct size, but there are different styles of hinges that you will need to know before purchasing. There are 3-point hinges, 4-point hinges, and continuous hinges. Cover # BV0554-03 fits 14-1/4 square roof vents and has a continuous hinge.

Unfortunately, there is not a master parts list where I can look up your trailer and find what type of vent you have in your camper. Manufacturers tend to uses different vent manufacturers from year to year usually depending on the cost of the vent. To guarantee that you will receive the correct vent lid, you will need to know the actual size and type of hinge type is in the vent on your trailer. The RV manufacturer may be able to help you figure out your vent model if you contact them and give them your trailer's VIN.

Another option is looking at a whole vent replacement for your camper. Ventline Ventadome Trailer Roof Vent - Manual part # V2092SP-28 is a 14-1/4 x 14-1/4 vent that includes a garnish that fits a 1-7/8 to 3 inch thick roof. Replacing the whole vent will let replace all the parts of your old vents that could also wearing out and might cause leaking. A new vent ensures you will have new parts and sealant applied to replace the old seals.

I also recommend # 344270KITW installation kit. This kit includes screws to fasten the new vent to the camper, Butyl tape, and a tube of sealant to seal around the vent to prevent leaks.