Replacement Roof Vent Lid for Avion 5th Wheel 1993

Question

Question:

Look to replace the two covers for the heat and one measures 15 x 3 3/4 with the louvers at 2 in to fit in hole the second one is 21 3/4 x 5 7/8 I am not seeing anything close in my search thanks

asked by: Cathyanne W

0

Expert Reply:

Thanks for the picture of the roof vent assembly you need a replacement lid for. Based on that you'd need Ventline Old Style Rounded Dome Trailer Roof Vents - White # BV0554-01 or Smoke # BV0554-03. I attached an install video for this for you to check out as well.

The larger hole size you mentioned that is over 21 inches doesn't quite match the pictures though so if you have a second roof vent that's longer we wouldn't have a solution.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Thanks for submitting a picture of your vent! Because of that I can tell you need a #BV0554-01 which has a continuous hinge.

view full answer...

Answer 3

Hey Chris, thanks for the picture. Based on seeing that, the correct lid would be the part #BV0554-01.

view full answer...

Answer 4

It sounds like you have a Heng's Roof Vent 122112. This is known as the Ventline Old Style Rounded Dome Trailer Roof Vent. Replacement parts are, #BV0554-01 for white or, #BV0554-03 for black. This will be the continuous hinge style. Please…

view full answer...

Answer 5

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 6

We do carry the Advent AC units, but the ACRG11 is an older model that has been discontinued. If you are looking to replace it, I recommend the #ACRG15 which comes with the distribution box and wall thermostat. To replace the AC unit itself we have…

view full answer...

Answer 7

To know what hinge type your Heng's Industries Roof Vent Model 122112 has you would need to get up on the roof as the hinge will be visible on the outside. There are four different hinge styles: 3-point, 4-point, metal continuous, and plastic…

view full answer...

Answer 8

To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.

view full answer...

Replacement Roof Vent Lid for Avion 5th Wheel 1993

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching