How to Determine Which Trailer Roof Vent Cover will Fit a Trailer
Question:
I am trying to figure out which vent cover replacement I need for an 2001 cub series trailer by Thor industries. Thanks
asked by: Aidan I
Expert Reply:
In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14".
To pick the correct cover, you will also need to know the type of hinge you need.
There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on the MaxxAir # MA00-335001.
Basically the easiest way to select the correct replacement cover is to remove the existing cover and match the hinge and lift bracket to the photos on our site along with the dimensions. A link to all of the replacement vent covers is provided to match up with your cover.
If it is not clear which hinge style that you have, the MaxxAir above is a Universal Replacement Lid.
In the event that you don't find a lid you like, I also included a link to our main page for our complete 14 x 14-inch vent assemblies. These are offered in manual or powered lift and with or without fans. If you install a complete new vent you'll need an installation kit, either # 344270KITW for a metal or coated metal roof or kit # CAM25013 for a rubberized roof..
Doug M.
9/7/2020
the replacement vent that I purchased appears to be about 1/4 inch short on depth. my roof is about 2 and 3/8 inches thick. is there a way to make it look appropriate on the ceiling?
Mike H.
7/16/2020
Are there rv vent covers that are better, meaning they last longer some that maybe less expensive?
Products Referenced in This Question
Roof Vent Installation Kit - Sealant, Butyl Tape, Screws - White
- Accessories and Parts
- RV Vents and Fans
- Vent Install Kit
- LaSalle Bristol
more information >
Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent - Smoke - Wedge Shape - Plastic
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- 14W x 14L Inch
- Plastic
- Tinted
- Ventline
more information >
Camco RV Vent Installation Kit - Rubber Roofs or Sidewalls - White Butyl Tape
- Accessories and Parts
- RV Vents and Fans
- Vent Install Kit
- Camco
more information >
Camco Replacement Lid for Jensen RV Roof Vent w/ Metal Base - Polypropylene - White
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- 14W x 14L Inch
- Plastic
- White
- Camco
more information >
Camco Replacement Lid for Jensen RV Roof Vent w/ Pin-Style Hinge - Polypropylene - White
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- 14W x 14L Inch
- Plastic
- White
- Camco
more information >
MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent - Translucent White
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- Plastic
- White
- MAXXAIR
more information >
Product Page this Question was Asked From
Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- 14W x 14L Inch
- Plastic
- Tinted
- Ventline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent - Smoke - Wedge Shape - Plastic
- Shop: MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent - Translucent White
- Shop: Camco Replacement Lid for Jensen RV Roof Vent w/ Metal Base - Polypropylene - White
- Shop: Progressive Dynamics 4000 Series RV Converter w/ Charge Wizard and AC/DC Distribution Panel - 60 Amp
- Shop: Camco Replacement Lid for Jensen RV Roof Vent w/ Pin-Style Hinge - Polypropylene - White
- Video: Progressive Dynamics RV Power Control Center Installation - 2017 Airstream Flying Cloud Travel Trail
- Video: Ventline Ventadome Replacement Vent Installation
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 5 on 4-1/2 - Load Range D
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 4 on 4 - Load Range D
- Search Results: progressive dynamics
- Q&A: Recommended Replacement For A WFCO WF-8750P Power Center
- Q&A: How do I Ground the Wires on The AC/DC Mighty Mini Panel # PD4060K?
- Search Results: vd0433
- Q&A: Vent Cover Recommendation for Ventline Roof Part # VD0433
- Q&A: What is the Standard Roof Vent Size Opening and Are They All This Size
- Shop: RV Covers
- Article: How to Replace an RV Roof Vent Cover
- Shop: Suspension Enhancement
- Search Results: bvc0573~41
- Q&A: Replacement Screen for Ventline Ventadome VD0433 Trailer Roof Vent
- Video: Review of Dometic RV Toilets - Standard Height - DOM64FR
- Video: Review of Dometic RV Toilet Parts - Flush Ball Replacement Kit - DOM68FR
- Search Results: t05~0784
- Q&A: Replacement Part For Ventline Manual Roof Vents P/N VDO 433 & VDO 434
- Video: Review of Valterra Replacement RV Toilet Floor Flange - T05-0784
- Search Results: roof vent cover
- Search Results: roof vent
- Q&A: Replacing Atwood GC10A-3E Water Heater with Tankless
- Video: Fan-Tastic Vent RV Roof Vent Replacement Dome Review
- Video: MaxxFan Deluxe Roof Vent with 12V Fan Review
Josh P.
11/10/2021
Looking for vent cover for 2006 PACE enclosed trailer but didn't see PACE on the list of manufacturers.