Draw-Tite Hitch Receiver Lock - Extra Long - Flush Design
(173 reviews)
Price: $27.88
In Stock
Draw-Tite Hitch Receiver Lock - Extra Long - Flush Design
Item # BD580412
Retail:$60.77
Our Price: $27.88
You Save: 54%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (173)
- Q & A (0)
- Videos (1)
- Photos
Draw-Tite Trailer Hitch Lock - BD580412
- Fits 2-1/2 Inch Hitch
- Fits 3 Inch Hitch
- Standard Pin Lock
- Keyed Unique
- Draw-Tite
- 3-1/2 Inch Span
- Steel
- Flush Pin
This solid, high-strength steel, flush-style hitch lock lets you secure your ball mount, bike rack, cargo carrier or other accessory to your trailer hitch receiver 2-1/2" and larger. 5/8" Pin diameter.
Features:
- Flush-style trailer hitch receiver lock is used in place of standard pin and clip to prevent theft of ball mount or hitch-mounted accessory
- Secure your bike rack, cargo carrier, hitch cover and more to your trailer hitch
- Dual self-locking system provides excellent security
- Stainless steel pin offers superior strength and durability
- Plastic cap covers key slot to help prevent corrosion in the locking mechanism
- 2 High-security, square keys included
Specs:
- Application: 2-1/2" and larger trailer hitch receivers
- Usable span: 3-1/2"
- Pin diameter: 5/8"
- Limited 1-Year warranty
580412 Draw-Tite Receiver Lock Dogbone Style
California residents: click here
Video of Draw-Tite Hitch Receiver Lock - Extra Long - Flush Design
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Draw-Tite Extra Long Hitch Receiver Lock Review
What's up everybody. It's AJ with etrailer.com Today we're checking out this locking hitch pin from Jaw Tight. Now this one is an extended one so it's a little bit longer to fit two and a half and three inch hitches. Let's check it out. You put the key in. You should turn it until the lock mechanism pops out.
Then you can separate the pin from the lock. I put the pin through our hitch and ball mount, may need to shake the ball mount a little bit just to get it through there. We'll put our lock on the other side. With the lock mechanism popped out. You can see it's farther back in there so, you know, you can just put this on there, pushing a lot and it's in place.
Looking closer at the lock. It has a smooth finish, and there's not really a grip on it but it's all right, because the lock is big enough easy to grab onto and pull off when you go to unlock it. Nice and easy to grab onto versus your standard hitch pin and clip which are a little bit smaller and harder to get in there and pull that pin out. You're going to hit your hand on the bumper or your ball mount or something like that. Or they get rusty over time and they get even harder to pull out.
This one's nice and easy. To help protect your lock from the elements. It does come with a rubber cap that you can put on there. Now, it's not attached. So you don't have to remember where this is when you have it, but at least it comes with it.
You may notice a little bit of back and forth or just a little bit of gap between the lock and the heads but that's okay because it's meant for a two and a half inch hitch and a three inch hitch. So when you do it on three inch hitch there's gonna be less of a gap, but there's not enough space for anybody getting there and do anything. It's going to be a great help to turn and keep your ball mount protected. So overall it gets the job done. It'll definitely lock our ball mount into our hitch. There's a few things that I'm not a huge fan of, the cap not being attached is kind of annoying. Cause I'm afraid I'm going to lose it. Or just going to fall off. The lock mechanism is a little iffy. You turn it. Sometimes it pops up. Sometimes it doesn't, you know, I'll turn it left or right. It looks like it's popping out now. So that part it's just iffy and then the whole lock rotates. So if it's not up against the hitch exactly, you're going to turn the lock when you're trying to get that mechanism, you're going to kind of have to hold onto that, turn it to get it to pop out. I think there's just some better hitch locks out there that have the attached dust cover and a better lock mechanism that we offer that you could probably check out. But that's going to do it for a look at the Jaw Tight hitch pin lock. Hope this helped..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Defective
- Wrong item was ordered
- Arrived Damaged
Customer Reviews
Draw-Tite Hitch Receiver Lock - Extra Long - Flush Design - BD580412
Average Customer Rating: 4.6 out of 5 stars (173 Customer Reviews)
This solid, high-strength steel, flush-style hitch lock lets you secure your ball mount, bike rack, cargo carrier or other accessory to your trailer hitch receiver 2-1/2" and larger. 5/8" Pin diameter.by: Richard03/14/2023
My new B&W drawbar and ball assembly arrived today for my 2020 F250 Super Duty. It is a perfect complement to a great truck. The receiver lock completes the package.
See the attached before and after picture.
by: Eric 03/21/2024
Just received the hitch lock. Fit perfectly and excited to have something that keeps my expensive hitch secured.
by: William07/13/2022
I find this lock Does a good job securing my hitch however it is difficult to engage with the key. Could be more user-friendly.
by: Alastair05/12/2021
Had this a year and many towing miles now. It's as good as the day I got it - lock still works perfectly. My F250 has a 3" receiver which has a 2 1/2" adapter, which, in turn, has a 2" adapter - pulling an 8,000lb trailer. This adapter setup has bent all of the "cheap" hitch locks I've tried, but this one is solid.
Alastair
5/13/2022
Still going strong and still straight.
by: Marc11/09/2021
Kind of does what it says, but the lock portion falls out of the outer tube when unlocked as it's missing a retaining screw to keep the lock in. I've since learned there are keyed-alike locking pins by weigh safe so will try to get one of those. Returning is more work than keeping and paying attention when unlocking but this rating suffered.
by: Robert 01/24/2024
Totally satisfied with my purchase!
by: Poor quality, made in China.04/16/2023
Arrived broken. Could not get lock to latch over pin. Requested replacement.
by: Jason09/28/2022
Used this ONCE on a trip this summer. Came home and found the locking end fell right off into my hand. The ball detents had collapsed and were not secure in the slightest. Had the pin backed out, it would have been a very bad day for my family and anyone behind us on the road. I cannot believe these are not quality controlled better with the massive liability that comes along with such a critical component. This thing is JUNK. Stay away from this part.
by: Jay B08/09/2020
Perfect fit for the stock 3” receiver on my Ford F-350. I made the mistake of leaving the locking pin in the receiver over our Canadian winter and I thought it would be rusted shut but it still works like new. Great product and quick advice and delivery from etrailer!
Jay B.
8/10/2021
Still working great a year later. Perfect for the 3 receiver on my F350.
by: Thomas08/19/2019
I was having trouble finding a hitch pin long enough to fit my class 5 receiver on my 2011 Silverado. This one fit the bill perfectly. Etrailer support was very helpful and shipping was quick thank you very much
Thomas
8/20/2020
Works as expected
by: Terrence 10/27/2022
As advertised. I have a 3" receiver and needed a locking pin that would work on that 3" receiver. It worked with about a half an inch to spare. Easy to unlock if the hitch needs to be removed.
by: Larry 08/26/2022
Plenty long enough for a 3" receiver hitch. Seems to work fine. I've only taken it out a couple times in the past year.
by: Paul09/27/2022
Lock is sloppy and loose. Makes me wonder if it will stay on. O'ring inside is all messed up after a few uses, and makes it very hard to take off.
by: Jason 10/02/2022
Worked great but weigh safe had thier own keyed alike looking pin to match their flip over ball
by: Andrew02/23/2019
This product does what it's designed too, that's why I gave it three stars. However, it did not fit my needs...it works better on narrower ball mounts. I have a B&W tow and stow three ball mount and need a hitch receiver lock that's about 1/2" to 1" longer to fit it.
by: John05/30/2019
I finally found a locking pin long enough to go through my hitch. I have a 2” sleeve inside a 2.5” sleeve inside a 3” receiver. The OD is too big for most locking pins.
This was my only choice I could find so I would have been happy with just about anything that fit. This way exceeded my expectations. The locking mechanism is super smooth and it has a rubber o-ring that keeps dirt and debris out of places it shouldn’t be.
by: Steve 07/21/2023
Worked even better once lubricated.
by: Declan08/16/2022
Low profile. Did not work upon receipt.
Katrina B.
8/29/2022
I am sorry to hear that this item did not work for you. I have sent your information over to our customer service department for them to get in touch with you about the lock.
by: Dave05/13/2021
I kept finding this hitch lock unlocked so I tried locking and pulling/twisting snd it pops open every time within 3 seconds. It seems the hiway was putting enough vibration to the lock to pop the locking mechanism up. I have 4 of these two extra long for 2.5 receiver and two for 2”
by: Allen 02/26/2020
I received the Draw-Tite Hitch receiver Lock-extra long flush design #BD580412 in a very timely fashion. I ordered it because your web site stated it had a 4 inch span and I wanted to lock my Roadmaster #050 Roll-away to my trailer hitch. When I received it I read the Manufacturers packaging and it said it had a 3 1/2 inch span.I was fuming but I decided to cut it out of it's packaging, put it together and then measure the span.To my relief the span is actually 4 inches not 3 1/2. Please pass that on to the manufacturer. The product seems very well built.
by: Ken12/09/2019
It's well made, however I was unable to unlock it after 6 months of use. Ended up using a large hammer to break it free. Once I got it apart I found the ball bearings on the shaft had rusted and wouldn't allow the end to free up and come apart. I would suggest if you buy periodically take it apart and clean it and apply grease to the bearing.
by: Tony D06/30/2017
The hitch lock seems durable; however, time will tell how it holds up. The process in purchasing it was effortless, but the shipping took longer than expected based on other reviews of items that had super fast shipping from etrailer.com. This was purchased for my 2017 F250, which has the heavy duty (wider) receiver. It is plenty long enough to fit the new receivers.
by: Ray J05/31/2019
I have purchased other products from etrailer that have been great. This however is complete junk. The key lock part of it was a problem from day one and after the third time it completely failed and it took nearly an hour to remove it.
by: Rodger07/31/2019
Hard to find some products anywhere else. These folks have good prices, REALLY fast shipping, and always attentive to my needs.
Rodger S.
8/1/2020
Only choice that would fit a Tacoma receiver a year later and it still works perfect. Worth every dime to keep my Reese dual cam hitch safely on the truck
by: Roy05/04/2020
It did not last for 8 months. The key cylinder (the part that the key goes in) came loose and would not lock or unlock. It would just spin around in the housing. I wound up having to cut the pin in order to get it off of the truck, despite keeping the black dust cap on the pin.
25
173
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch Lock
- Availability Of B&W Ball Mount For 3" Trailer Hitch ReceiverWe do! The available kits are the B&W Tow & Stow 3-Ball Mount - 3" Hitch - 7-1/2" Drop, 7" Rise - 21K - Black # BWTS30049B and B&W Tow & Stow 3-Ball Mount - 3" Hitch - 4-1/2" Drop, 4" Rise - 21K - Black # BWTS30048B. These two kits have a 1-7/8" ball with a 3500lb towing capacity, 2" ball with a 7500lb towing capacity, and 2-5/16" ball with a 21000lb towing capacity. The last kit is the B&W Tow & Stow 2-Ball Mount - 3" Hitch - 4-1/2" Drop, 4" Rise - 21K - Black # BWTS30037B which has...
view full answer... - Trailer Hitch Lock that Fits a 3 Inch Trailer Hitch ReceiverThe pin length on BOLT lock # BL7023585 won't be long enough for a 3 inch trailer hitch. Right now they do not make one that will be long enough but who knows what the future holds. If the 3 inch hitches take off in popularity then we might see some accessories like BOLT locks made for them.
view full answer... - Hitch Lock for a Class IV HitchYes, the Draw-Tite Hitch Receiver Lock item # BD580412 is rated for a class IV hitch. It will fit class IV hitch has a 2-1/2" or 3" receiver you will want
view full answer... - Recommended Hitch Lock and Ball Mount Compatible with 3 Inch Hitch with Reducer SleeveThe Flash E Series Adjustable 2-Ball Mount w Chrome Balls # FA42-00-2800 has a 5/8 inch pin hole diameter. I believe you will be able to use the Fastway Trailer Hitch Lock and Adjustment Pin Lock Set for Flash E Series Ball Mounts # FA86-00-3660 for a locking combination. The hitch lock is 3-5/8 inches from inside to inside so as long as your 3 inch receiver is under that 3-5/8 at the outer edges you will be fine. You can alternatively use the Draw-Tite Trailer Hitch Lock - 3" Hitch...
view full answer... - Recommended Towing System for 2013 Volvo XC60For your 2013 Volvo XC60, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13268 you stated. Then for your wiring, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118739 and the # ETBC7L. Then for your brake controller I recommend the Curt Echo # C51180 which is a wireless system that you can store in your glove box when not in use. It is a great controller with no wires run to your dash and can be transported from vehicle...
view full answer... - Does B&W Tow & Stow 3-Ball Mount # BWTS30048B Come with Hitch PinThe B&W Tow & Stow 3-Ball Mount # BWTS30048B does not come with a hitch pin so you'd need to order that separately with the part # 325-GH-099 for a pin or part # BD580412 for a hitch lock.
view full answer... - Locking Hitch Pin, Coupler Lock and Coupler Latch Lock for 3 Inch ReceiverThe span of the hitch locks included with the Reese Tow and Store lock kit don't have a span long enough to work with a 3 inch receiver. However, you could piece together a kit that'd work for you. For the receiver lock, I'd recommend the Draw-Tite # BD580412 which offers a 4 inch span and uses a high security key. For the coupler lock, use # FA86-0015-318 and for the coupler latch lock, use # 605DAT. ..
view full answer... - Recommended 48 Inch Hitch Extender For My 2021 GMC 3500 With A 3 Inch Hitch When it comes to adding a 48 inch hitch extender to your 2021 GMC Sierra 3500 with a 3 inch hitch The TorkLift Cannon Hitch Extension - 3 inch Ford Super Duty Factory Hitch - 48 inch Long # TLE1648 will be the correct one for you. This heavy-duty design lets you maintain a high towing capacity and allows you to use a standard weight distribution system if needed and comes out as a 2-1/2 inch receiver. The patented, lateral-support safety chains provide extra security and help to distribute...
view full answer... - Anti-Rattle Hitch Lock & Hitch Cover for Reese 2-Inch Trailer Hitch ReceiverThe diameter hitch pin for a 2-inch hitch is 5/8-inch, very close to your 9/16-inch dimension. In this size we offer a plain pin/clip # PC3, locks such as # BD580412 and anti-rattle locks such as # 63232. This anti-rattle lock works in any hollow-shank ball mount or accessory carrier to both steady it and help protect it from theft. I linked our main pages for 2-inch hitch covers, including plain rubber covers like # 22282 and # I-728 as well as themed covers.
view full answer... - Comparing the Bulldog Hitch Receiver Locking Pin to the Weigh Safe Hitch Receiver LockIf your 2017 Ford F-250, whether you have the 3 inch receiver or the 2-1/2 inch, the two options you gave of the Bulldog Hitch Receiver Lock - Extra Long - Flush Design for 2-1/2" Trailer Hitches # BD580412 and the Weigh Safe Hitch Receiver Lock for 2, 2-1/2, and 3inch Hitches - 3-1/2inch Span # WS05 are both great options. The usable length of the Bulldog lock is 3-1/2 inches so it will work with a 3 inch receiver as well as the 2-1/2 listed in the description. I like the look of the...
view full answer... - Recommended Hitch Receiver Lock That Can Be Keyed AlikeI have another option but unfortunately the Draw-Tite Hitch Receiver Lock # BD580412 cannot be ordered keyed alike. I recommend the etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches # e98881 which can be keyed alike by selecting the keyed alike drop down and changing the quantity to the number of locks you need which in your case would be 25. I included a video of the etrailer Hitch Receiver Lock # e98881 for you to take a look at.
view full answer... - Best Hitch Ground Clearance On A 2009 Toyota Rav4The measurements from the ground to the top of the inside of the receiver on the Curt # C12108 is going to be 12-3/4" . You need to buy a hitch pin and clip for your accessories. Item # e95TR works well. I recommend grabbing a pin that locks because in my experience when traveling or just out running errands it gives me peace of mind knowing someone isn't going to take my expensive ball mount I'm so proud of. I use the Gen-Y Glider Shock Absorbing Ball Mount # 325-GH-12005 because it...
view full answer... - Recommended Locking Hitch Pin To Use With Lets Go Aero Slide-Out Cargo CarrierThe Lets Go Aero Slide-Out Cargo Carrier # H01472 does have two hitch pin holes. The first hole has been added if you need additional clearance when the cargo carrier is being used. The second hitch pin hole is the recommended one to use but if you need the clearance, the first pin hole will work as well. The locking hitch pin I recommend is the etrailer lock # e98882. This is a stainless steel hitch lock, and it has a covered key slot to prevent corrosion. If you happen to have a...
view full answer... - Where is the Draw-Tite Hitch Receiver Lock BD580412 Made?The Draw-Tite Hitch Receiver Lock - Extra Long - Flush Design part # BD580412 is manufactured in China. For an alternative that is made in the United States I recommend using the InfiniteRule Hitch Lock for 2-1/2" Hitches - 3-1/8" Span - Stainless Steel part # 34061072-D for 2.5" hitch applications and the InfiniteRule Hitch Lock for 3" Hitches - 3-7/8" Span - Stainless Steel part # 34061074-D for 3" hitch applications. These are both made here in the United States and will offer...
view full answer... - Trailer Hitch Receiver and Coupler Lock Compatible with Weight Capacity of BlueOx SwayProI have a locking hitch pin solution for you, but I confirmed that the locking hitch pin in the Receiver and Coupler Lock Set # e99039 is rated for use with Class III and Class IV trailer hitches. Since most Class IV trailer hitches have a capacity of 10,000 pounds, this is the capacity they list for the receiver lock # e98880 in the Lock Set # e99039. I recommend using theDraw-Tite Hitch Receiver Lock - Extra Long - Flush Design # BD580412. This has an extra-long 3-1/2" span so it should...
view full answer... - Best Locking Hitch Pin for a 3 Inch Trailer Hitch ReceiverYes, the Bulldog Hitch Receiver Lock part # BD580412 is a locking hitch pin that will fit the 3" trailer hitch receiver on your 2017 Ford F-350. This hitch pin has a dual self-locking design with a flush look. It is constructed of stainless steel and is 5/8" in diameter. The included dust cap will help keep the lock core free of dirt and debris. This is currently the only locking hitch pin we offer that will fit a 3" trailer hitch receiver for the exception of the Weigh Safe Hitch Receiver...
view full answer... - Recommended Hitch Pin Lock for a 2019 Ford F-350I like the Bulldog Hitch Receiver Lock part # BD580412 for a 2019 Ford F-350 because the dust cap is a bit more protective than most other options.
view full answer... - Gen-Y Stackable Receiver Ball Mount for 3 Inch Hitch Receiver and Compatible Hitch LockThe Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers for 3" Hitch - 6" Drop/Rise - 32K # 325-GH-1723 is a great option for your 2019 Ford F-250 with 3 inch receiver. This ball mount will use 2-1/2 inch receivers, so the Bulldog Hitch Receiver Lock # BD580412 will work.
view full answer... - Recommended Gen-Y Torsion 2-Ball Mount For 2-1/2 Inch Hitch With 9 Inch Rise/DropTo answer your question about the optimal ride tongue weight, our ranges are referring to use with the 2-5/16 inch hitch ball while the Gen-Y website does not differentiate, hence the slight difference in ranges. That said, since you mentioned your tongue weight could be in the 1,800 lb range, I recommend going with the higher rated ball mount: - Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2-1/2" Hitch - 9" Drop/Rise - 21K # 325-GH-1325 Keep in mind, this is assuming you are using...
view full answer... - What 2-5/16 Inch Ball will Fit the 1-1/4 Inch Hole Diameter of the Draw-Tite Ball Mount # 40702?For 2-5/16 inch a ball that fits the 1-1/4 inch ball hole diameter of the Draw-Tite Ball Mount # 40702, I recommend the 2-5/16" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank # C40085. Since this ball has a 1-1/4 inch diameter shank, it is compatible with the # 40702. If you happen to need a hitch pin with the ball mount, the # BD580412 not only provides a snug fit, but it also has a lock for theft-deterrence.
view full answer... - Should Anti-Rattle Device be Used on Hitch Extension and Spare Wheel/Tire CarrierUsing an anti rattle device on both the extension part # C45795 and the spare carrier part # C31006 would be ideal as you'd have quite a bit of movement without doing so. Between the extension and the carrier, you can use the part # 63232 since the carrier has a hollow shank. Then since the extension has a solid shank, you'd need to use a U-bolt style anti-rattle like the part # RM-061 and you'd be set. The # 63232 doubles as a hitch lock so for a standard hitch pin lock for the extension...
view full answer... - Does Bulldog Hitch Receiver Lock # BD580412 Have Weight CapacityHitch pins and hitch pin locks like the part # BD580412 that you referenced don't actually bear any weight when used with a ball mount so they don't have weight capacities. The downward force of the tongue weight of the trailer is so great that the ball mount is pinned into the hitch so hard that none of the weight is put on the hitch pin. This pin lock will work great with your 3 inch hitch on your Ford truck.
view full answer... - Is The Draw-Tite Hitch Receiver Lock BD580412 Actually SecureThe end of the pin of the Draw-Tite Hitch Receiver Lock part # BD580412 that has the black cover holds the locking mechanism. It would be possible for a thief to drill put the lock if they wanted to. The lock is a theft deterrent but not theft proof. We have not had any customer complaints about it breaking over time. If the tension ball is what bothers you about the design, I recommend to use etrailer.com Trailer Hitch Receiver Lock part # e98881 which is considered a bit more secure...
view full answer...
- Will Hands-Free Liftgate Operate with Curt Hitch Receiver Installed on 2017 Volvo XC90The Curt # C53HR will not prevent the hands-free liftgate feature on your 2017 Volvo XC90 from working. The only way it may impact is you likely won't be able to activate it with your foot directly under the hitch receiver but it will still work just to the side. If you're going to be towing with your Volvo, the wiring harness # 118683 is confirmed to fit. This will provide you with a 4-way trailer connector. It installs by plugging into the wiring which is behind both tail lights. For...
view full answer...
Do you have a question about this Trailer Hitch Lock?
Info for this part was:
Installed by:
Andrew K
Installed by:
Jeff D
Installed by:
David F
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Chris R
Written by:
Shelly K
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Hannah L
Updated by:
Noah M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
William C.
7/15/2023
I have stopped using this product. Too hard to lock. Not a fan.