Trailer Hitch Lock that Fits a 3 Inch Trailer Hitch Receiver

Question

Question:

Is there another class v 3” that will fit? I appreciate any help you give me. Thank you for your time.

asked by: Cora

0

Expert Reply:

The pin length on BOLT lock # BL7023585 won't be long enough for a 3 inch trailer hitch. Right now they do not make one that will be long enough but who knows what the future holds. If the 3 inch hitches take off in popularity then we might see some accessories like BOLT locks made for them.

expert reply by: Michael H

0

Cora

3/2/2018

Is there another class v 3” that will fit? I appreciate any help you give me. Thank you for your time.

Reply

Michael H.

3/2/2018

Yes, there are some hitch locks that will fit the 3 inch hitch but they use their own keys. We have Weigh Safe lock # WS05 and Bulldog lock # BD580412. The main differences are the Weigh Safe uses a bent pin and barrel/tube keys and the Bulldog lock uses a straight pin and flat keys.

Reply

Answer 1

The BOLT Trailer Hitch Receiver Lock #BL7023585 is capable of fitting the 3" receiver hitch. I have included the measurements below if you would like to confirm those with your hitch on your 2021 Ford F-350. There are also many reviews on our…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 12

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Trailer Hitch Lock that Fits a 3 Inch Trailer Hitch Receiver

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching