B&W Tow & Stow 3-Ball Mount - 3" Hitch - 7-1/2" Drop, 7" Rise - 21K - Black
(3852 reviews)
Price: $399.00
In Stock
B&W Tow & Stow 3-Ball Mount - 3" Hitch - 7-1/2" Drop, 7" Rise - 21K - Black
Item # BWTS30049B
Our Price: $399.00
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (3852)
- Q & A (0)
- Photos
- Used (1)
B and W Trailer Hitch Ball Mount - BWTS30049B
- Fits 3 Inch Hitch
- Adjustable Ball Mount
- Drop - 7 Inch
- Rise - 7 Inch
- 1-7/8 Inch Ball
- 2 Inch Ball
- 2-5/16 Inch Ball
- Three Balls
- 21000 lbs GTW
- Class V
- B and W
- Steel Shank - Matte Black
- Steel Ball
Stow the ball and mounting platform on this tri-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball, 7,500 lbs with the 2" ball, or 21,000 lbs with the 2-5/16" ball.
Features:
- Ball mount with built-in hitch balls lets you hook up your trailer to your tow vehicle
- Shank slides into hitch receiver
- Ball provides connection point for trailer coupler
- Stowable design lets you store ball and mounting platform underneath your vehicle
- Remove pins holding ball mount platform in place on shank
- Flip platform underneath the hitch
- Reinsert pins and clips to secure ball mount platform for travel
- Adjustable height lets you tow trailers of different heights with the same vehicle
- Slide ball mount up or down along shank and secure in place with included pins and clips
- Anti-theft design ensures ball mount platform can't be removed when Tow & Stow is installed in hitch
- No additional locks required to prevent platform and balls from being removed
- 3 Different-size hitch balls let you tow trailers with different coupler sizes
- To switch ball, simply remove pin, rotate balls, and reinsert pin
- Dual-process chrome plating on balls provides excellent rust resistance
- Black powder coated shank is corrosion resistant
- Stainless steel pins create sturdy, rust-resistant connections
- Durable steel construction with high yield tubing offers superior strength
- Hitch pin and clip or hitch lock sold separately
- Made in the USA
Specs:
- Application: 3" x 3" trailer hitch receivers
- Gross towing weight:
- When used with 1-7/8" ball: 3,500 lbs
- When used with 2" ball: 7,500 lbs
- When used with 2-5/16" ball: 21,000 lbs
- Distance from center of hitch pin hole to center of hitch ball:
- Hitch pin hole closest to ball: 9-1/4"
- Hitch pin hole farthest from ball: 10-3/8"
- Maximum drop: 7-1/2"
- Maximum rise: 7"
- Incremental height adjustment: 1-3/8"
- Limited lifetime warranty
Note: To avoid the Tow & Stow hitting steep driveways or curbs, we recommend at least 11" of clearance between the ground and the lowest point of the drop hitch, as seen above.
The B&W Tow & Stow adjustable ball mount lets you tow a variety of trailers with different tongue heights. Having a 1-7/8" ball, a 2" ball and a 2-5/16" ball allows for even more versatility, making this the ultimate go-to ball mount if you own multiple trailers.
Easily Adjusts and Stows
To switch the hitch ball, simply remove the pin holding the balls in place and rotate the entire block that the balls are mounted on until the ball you want to use is on top. Then replace the pin to secure the block in place.
Adjusting the height of the ball is just as easy. Remove the pins holding the ball mount platform in place and slide the platform up or down along the shank to the desired position. Once you have found the correct height, reinsert the pins and replace the clips.
When you're not towing, you can flip the ball mount platform around and stow it beneath your hitch so that you won't bang your shins. Just remove the pins to slide the ball platform down along the channel and up the back side so that the hitch balls face towards your vehicle. Then replace the pins.
Built-In Anti-Theft System
The Tow & Stow ball mount features a channel that runs along both sides of the shank. This channel not only allows you to slide the ball mount platform up and down to adjust the ball height, but it also prevents removal of the platform when the ball mount is installed, which will help prevent theft of your trailer.
A slot is cut into the adjustment channel near the top of the shank. To remove the ball mount platform from the shank you will need to remove the entire ball mount from your hitch. Then remove the pins that hold the platform in place. Flip the platform around to the stowed position on the rear of the shank, and then slide it up until the center pin lines up with the slot in the shank. Pull the platform out towards the rear of the shank until the pin pops out of the adjustment channel.
When the Tow & Stow is secured in your hitch receiver, you will not be able to remove the ball mount platform. This is because the slot in the shank is positioned in such a way that the collar on your hitch will block the pin on the platform from being able to leave the channel. Even if the pins holding the ball mount platform in place are removed, the platform will still be confined to this channel. So, as long as a hitch lock is used to secure the entire ball mount in your hitch receiver, and a coupler lock is used to prevent your trailer's coupler from being disengaged from the ball, your trailer will be secure.
TS30049B B and W Stow and Tow Triple Ball Mount - 1-7/8" Ball, 2" Ball, and 2-5/16" Ball - Black
California residents: click here
Customer Satisfaction Score:
75% were satisfied with this product
25% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
B&W Tow & Stow 3-Ball Mount - 3" Hitch - 7-1/2" Drop, 7" Rise - 21K - Black - BWTS30049B
Average Customer Rating: 4.9 out of 5 stars (3852 Customer Reviews)
Stow the ball and mounting platform on this tri-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball, 7,500 lbs with the 2" ball, or 21,000 lbs with the 2-5/16" ball.by: Zachary03/01/2024
I love this hitch. With a locking pin, it stays on my truck all the time. Here’s why:
Height adjustment. This truck was tall when I bought it, so I needed the drop for my trailers to ride level.
3 balls. We have 3 trailers of different sizes and weights, so all 3 balls get used.
And a step! Even when not towing, I use this step to access the bed all the time.
Fits my 3” receiver without an adapter.
Spend the money and you will have no regrets down the road.
by: Eric 03/23/2024
Best hitch I've ever bought. This thing is amazing. It works for every trailer I've ever towed and looks great on the back of the truck unlike other manufacturers hitches. It has not rusted but I do wash the truck including this hitch every week. I live in the Salt band so that says alot. I would recommend this to anyone looking for a solid 1 time buy set up.
by: Craig 03/24/2023
Great Hitch, flexible and very beefy. Great service, shipped quickly.
by: Dan08/02/2023
Horrible shipping. No box for the mount, and it was thrown into a much larger box with other metal brackets and straps with metal buckles so the B&W hitch got all scratched up, and it is missing a spring clip. Ugh.
Brooke M.
8/7/2023
I am sorry to hear that it arrived in that condition! I will make sure our customer service team reaches out to you about this.
by: Martin 08/12/2023
This hitch eliminates the spacers necessary on the 3” receiver doing away with the slop and noise that comes with them. I would recommend this hitch to anyone with a heavy duty truck with the 3” receiver.
by: Jason08/12/2020
Just received my B&W Tow & Stow 3-Ball Mount - 3" Hitch - 7-1/2" Drop, 7" Rise - 21K - Black, and I am so thrilled about the product. The ordering was easy and it came to my house fairly quickly. They keep you up to date with what is going on, with your order, and that is fantastic. It completes my new Ford F250 LIMITED. Thank you!!
by: Ryan05/27/2021
Absolutely wonderful! Super heavy duty! I haul around my heavy duty dump trailer with 15-20k pounds in it and this hitch can withstand anything. I have it turned upward instead of downward to lift up the trailer a little higher to help with sag on my truck from the weight. I also love the ability to stow it however I never use that feature cause I’m always towing.
by: Brian06/11/2021
Ordered this hitch for my 2021 F350 Lariat. Perfect fit with perfectly matched ratings to my vehicle capabilities. I REALLY appreciated the brochure that came in the box as it was informative, educational, and concise. Packaged very well and arrived promptly. Thanks guys/gals.
by: Brandon05/11/2023
Excellent quality. Nice looking and functions well. No second guesses about buying this item. Highly recommend it.
by: Joe04/29/2022
My order was out of stock. E trailer notified me right away with an alternative. I called and receive a great description of the in store alternative. The parts will be shipped right away. Unbelievable customer service!!!
Joe
4/30/2023
The hitch works like the day I bought it. Easy to use and store
by: J dennis10/06/2018
I originally ordered a Weigh Safe hitch, thinking it would rotate under the receiver when not needed, but it does not. I ordered this B&W that does so perfectly. My garage is barely long enough for the pickup and moving the ball into stow position prevents me having to remove it every time I pull into the garage. It would be too easy to be stolen if left loose in the back and in case if an accident I wouldn't want that hitch flying around inside the cab.
by: Jwb04/16/2020
Very stout. Quality. Don't drop it on your toe. Fast shipping. Paired with a good lock.
Jwb
4/17/2021
Great. Also ordered the draw bar for pulling implements. No more removing my hitch for other trailers.
by: Michael 11/24/2023
Have made several purchases from trailer and have always been pleased with the items purchased
by: Donna 12/16/2023
Excellent, well made, heavy duty hitch
by: Stephen02/16/2023
I am very happy with my purchase. The variable heights of the hitch are handy to keep my trailer level. I would recommend this hitch to anyone needing a hitch.
by: Doug S.07/30/2022
This hitch is stellar, extremely well designed, built and made in the USA which is very important to me. I can't wait to pull with it!
by: Cameron02/15/2023
The product is fantastic. Was not thrilled about how it showed up though.Caked in dust, not a problem. But water seemed to sit inside it at some point so the inside already had rusted.
Jenny N.
2/16/2023
I am not sure how it would have happened however that does not matter as I will have Customer Service department contact you. We can have it replaced as quickly as possible.
by: Steven 05/22/2023
Super Heavy Duty Hitch & Exactly what I was looking for. Thank You
by: Kimberly 12/28/2023
Hubby is super excited.
by: Lori 04/10/2023
Best hitch ever!
by: Christoffer05/18/2023
Lightning fast shipping and communication… flawless transaction. Will continue to do business with etrailer!
by: Jimmy06/19/2022
Very durable
Jimmy
6/21/2023
Excellant
by: Robert 07/11/2023
This thing is Awesome! It does everything I need, and folds out of the way.
Highly recommended.
by: Bruce 12/07/2022
I bought this for my son for Christmas last year to use with his F-350 super duty with 3” receiver. He enjoys it so much he bought a 2” version for his older super duty plow truck.
25
3671
Show More Reviews
See what our Experts say about this B and W Trailer Hitch Ball Mount
- Can The B And W Tow And Stow 3 Ball Mount Work With Rock Tamers On A 2020 F450The B&W Tow & Stow 3-Ball Mount - 3" Hitch - 7-1/2" Drop, 7" Rise - 21K - Black # BWTS30049B will not interfere with your rock tamers. From the hitch pin hole to the nearest point on the ball mount is 9-1/4 inches. This will give you plenty of space.
view full answer... - Tongue Weight Capacity of B and W Tow n Stow Ball Mounts # BWTS30049BThe tongue weight rating of the B and W Tow n Stow Ball Mounts like the part # BWTS30049B is based on the ball that you use. Basically each ball has it's own weight capacity and the tongue weight capacity is 10 percent of the trailer weight rating listed. So for the 1-7/8 inch ball you'd have a 350 lb tongue weight capacity, for the 2 inch ball it would have a 750 lb capacity, and for the 2-5/16 inch 2,100 lb.
view full answer... - Extension When Stowed of B&W Tow & Stow 3-Ball Mount # BWTS30049BWhen the B&W Tow & Stow 3-Ball Mount # BWTS30049B is in the stowed position the distance from the pin holes to the end of the shank is 4.5 inches and 5.7 inches.
view full answer...
- Can 3" Accessory Fit With Smaller Hitch Receiver OpeningYour 2017 Chevy Silverado 2500HD will likely have either a 2" or a 2-1/2" trailer hitch receiver. You can confirm this by measuring the inside height and width of the receiver on your pickup (see attached). If you are trying to use a 3" accessory in a smaller receiver then there unfortunately aren't any adapters that work for your application. If you do have a 3" receiver then yes, you can use an accessory with a 3" shank, like part # BWTS30049B. If you are referring to something different...
view full answer...
- Compatibility of B&W BWTS30049B Tow&Stow Adjustable Ball Mount with 2020 Ford F350The # BWTS30049B Tow & Stow ball mount is designed for 3 inch hitches, like what your 2020 F350 is equipped with. The upright or vertical portion of the B&W # BWTS30049B Tow & Stow adjustable ball mount is about 11 inches in total. If you measure 11 inches down from the top of the receiver tube of your F-350, you'll have a pretty good approximation of where the bottom of the ball mount would sit.
view full answer... - Does Ball Platform of B and W Tow n Stow part # BWTS30049B Require LocksActually the B and W Tow n Stow part # BWTS30049B that you have has a locking mechanism built into the channel which would prevent the platform from getting removed. This is because the slot in the shank is positioned in such a way that the collar on your hitch will block the pin on the platform from being able to leave the channel. Even if the pins holding the ball mount platform in place are removed, the platform will still be confined to this channel.
view full answer... - Which B and W Tow & Stow Adjustable Ball Mount for 2021 Ford F-350 with 3 inch HitchFor the 3 inch hitch of your 2021 Ford F-350 to determine if you need the 4-1/2 inch drop Tow and Stow part # BWTS30048B or the 7-1/2 inch drop part # BWTS30049B will be based largely on the trailers you plan to tow and how tall the coupler sits from the ground when level. The exact way to determine this would be to measure from the top of your hitch opening down to the ground compared to the distance from the bottom of the coupler lip to the ground when trailer is sitting level. If that...
view full answer... - Is there a B&W Tow & Stow for a 3 Inch Hitch Receiver?Yes, there is! It is the B&W Tow & Stow 3-Ball Mount item # BWTS30049B. This ball mount has a massive 21,000 lbs capacity when you use the 2-5/16" hitch ball. It has a 7-1/2" drop and a 7" rise. I recommend using the Draw-Tite Trailer Hitch Lock w/ Pick-Proof Key item # 63260 to prevent this ball mount from walking away. This lock is specifically designed for 3" hitch receivers.
view full answer... - Ball Mount For 3" Hitch With A 1-7/8" And 2-5/16" BallWe do have the B&W Tow & Stow 3-Ball Mount # BWTS30049B for a 3" hitch. This has a 1-7/8", 2" and 2-5/16" ball and is rated for up to 21,000 lbs. That one is the 7" rise/drop, we also have the # BWTS30048B for a 4" drop/rise
view full answer... - Best B&W Tow and Stow Ball Mount for a 2022 Ford F-350I would be happy to help you find the right ball mount for your husbands birthday. You are gong to need to measure the receiver on the end of his F-350 to determine the correct ball mount you need. You will want to measure the inside of the square. It should be 3' x 3" or 2.5" x 2.5". The B&W Tow & Stow 3-Ball Mount item # BWTS30048B you were looking at fits a 3" hitch. Which means it would need a receiver that measures 3" x 3". There is a factory option for a 3' hitch receiver from Ford...
view full answer... - Locking Pins to Lock Ball Mount Platform of B and W Tow and Stow Ball MountYes, the I Hitch Lock # AM3492 that you referenced is compatible with the platform adjustment pins of the B and W Tow and Stow ball mount # BWTS30049B. It will lock the platform portion of the ball mount to the shank and the ball to the side brackets. these aren't required by the design of the hitch as the ball platform can't be fully removed without removing the entire ball mount from the receiver.
view full answer... - B&W Tow & Stow 3-Ball Mount for 2020 Chevy Silverado 2500 with 3 Inch HitchThe B&W Tow & Stow 3-Ball Mount part # BWTS30049B is perfect for a 2020 Chevrolet Silverado 2500 with 3" receiver. For a lock, I recommend the InfiniteRule Hitch Lock for 3" Hitches # 34061073-D.
view full answer... - Recommended Adjustable Ball Mount For 2022 Ford F-350 Super Duty With 3" ReceiverI recommend the B&W Tow & Stow 3-Ball Mount # BWTS30049B for your 2022 Ford F-350 Super Duty. This ball mount fits your 3" receiver without any adapters needed. It includes 1-7/8", 2" and 2-5/16" hitch ball sizes giving you the ability to pull most all trailers. It has a weight rating of 21,000lbs and the ability to be flipped around and stored on your truck without hitting your shin on the ball mount when you are walking around the truck without a trailer attached. The BOLT Trailer Hitch...
view full answer... - Availability Of B&W Ball Mount For 3" Trailer Hitch ReceiverWe do! The available kits are the B&W Tow & Stow 3-Ball Mount - 3" Hitch - 7-1/2" Drop, 7" Rise - 21K - Black # BWTS30049B and B&W Tow & Stow 3-Ball Mount - 3" Hitch - 4-1/2" Drop, 4" Rise - 21K - Black # BWTS30048B. These two kits have a 1-7/8" ball with a 3500lb towing capacity, 2" ball with a 7500lb towing capacity, and 2-5/16" ball with a 21000lb towing capacity. The last kit is the B&W Tow & Stow 2-Ball Mount - 3" Hitch - 4-1/2" Drop, 4" Rise - 21K - Black # BWTS30037B which has...
view full answer... - Locking Pin Kit for B&W Tow & Stow 3-Ball Mount for 3" Trailer Hitch ReceiversTo lock your B&W Tow & Stow 3-Ball Mount # BWTS30049B to your 3" hitch receiver I recommend using the InfiniteRule Locking Pins # IR29FR because it's been tailored specifically for this ball mount and receiver size. The kit comes with a single pin for the receiver and then 3 pins for the ball mount itself, and all of them are keyed alike so you don't need to keep track of multiple keys.
view full answer... - Is There All Chrome Version of B and W Tow n Stow Ball Mount for 3 inch HitchThere isn't an all chrome version of the B and W Tow n Stow part # BWTS30049B. The closest option since there isn't anything all chrome for the 3 inch hitch is the Weigh Safe 2 Ball Mount part # WS10-3 which is aluminum.
view full answer... - Are The Hitch Balls Removable On The B&W Tow & Stow 3-Ball Mount # BWTS30049BThe ball on the B&W Tow & Stow 3-Ball Mount # BWTS30049B is only designed to rotate inside the mount. There is a snap ring which keeps the ball inside the mount when you remove the pin. So while the balls can be removed it would take a bit of work. Be sure to check out our review and operation video linked below to see how the pins secure the hitch together and allow it to move into a use or storage position. I do recommend replacing all the included pins with the InfiniteRule Locking...
view full answer... - Is There A Weigh Safe 180 Ball Mount Available With A 1-7/8" Ball For A 3" HitchI do have another option available that will suit your needs, but we currently do not offer a Weigh Safe 180 that is compatible with a 3" hitch and has a 1-7/8" ball, unfortunately. With that being said, the B&W Tow & Stow 3-Ball Mount - 3" Hitch # BWTS30049B will have the same 21,000 pound capacity, but will have slightly less drop/rise at 7-1/2". This will also include 1-7/8", 2", and 2-5/16" balls, making it extremely versatile.
view full answer... - InfiniteRule Locking Pins for B&W Tow & Stow 3-Ball Mount # BWTS30049B The InfiniteRule Locking Pins # IR29FR allow you to secure the B&W Tow & Stow 3-Ball Mount # BWTS30049B to your 2019 Ford dually with a 3" receiver.
view full answer... - Ball Mount Recommendation for 3" Hitch Receiver on Ford F-450The only way to avoid using a reducer sleeve like the Curt # C45408 is to get a ball mount with a 3" shank and for that I recommend checking out the B&W Tow & Stow 3-Ball Mount # BWTS30049B which comes with the 3 common hitch ball sizes (1-7/8", 2", and 2-5/16") and has an adjustable height so you get a max rise of 7" and a max drop of 7-1/2". The idea behind this ball mount is that it will be the last one that you need to buy since it has so much versatility. I also recommend picking...
view full answer... - Locking Hitch Pin Recommendation for a B&W Tow & Stow 3-Ball Mount for 3" Hitch ReceiverTo lock your B&W Tow & Stow 3-Ball Mount # BWTS30049B to your truck you actually only need one single locking hitch pin and for that I recommended checking out the InfiniteRule Hitch Lock # 34061073-D which is a stainless steel construction. The single pin keeps the ball mount locked to your trailer hitch receiver but if you want to lock the other 3 pins to prevent tampering with your height setting you'll want the 4 locking pin kit # IR29FR instead. The ball mount can't be removed with...
view full answer... - Is There A Pintle Adapter Available For A B&W Tow And Stow Ball Mount In A 3 HitchThough I may have another option available for you, the B&W Tow & Stow 3-Ball Mount # BWTS30049B is not available with a pintle hitch as of yet. With that being said, there are actually no current options available for the 3" hitches being used, so you will need to use a reducer, like the # 58552, if you do not already have one. This will allow you to go one of two ways. First will be the Curt Pintle Hook with 2-5/16" Ball - 2-1/2" Hitches # C45908. This is rated to 20,000 pounds and...
view full answer... - Can Fastway Self-Locking Adjustable 3-Ball Mount be Used with 3 Inch Receiver and Reducer SleeveI spoke with my contact at Fastway regarding the Self-Locking Adjustable 3-Ball Mount 2.5 Inch # DTALBM6825-3S referenced in your question. He stated that this actually will not work with the 3 inch receiver on your Ford F-350, even when using the Ford provided reducer sleeve. This is because of the design on the self-locking system that is utilized with this particular ball mount. The integrated locking knobs on the shank will do a great job of securing itself to the reducer sleeve, but...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Used Items Available
Condition: Badly Dinged
Notes: Item has cosmetic dings/dents.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video Edited:
Jacob T
Video Edited:
John S
Installed by:
Cole B
Installed by:
Aidan B
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Kristina F
Updated by:
Mike S
Updated by:
Noah M
Written by:
Amanda M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Craig C.
3/25/2024
Been great so easy with all of the sizes of trailer balls I need on one hitch.