InfiniteRule Hitch Lock for 3" Hitches - 3-5/8" Span - Stainless Steel

Receiving this lock I was disappointed. The end opposite of the key lock is smaller than the in photo on your website. To be specific, its only 3/4”, which is only an 1/8” larger than the shaft itself. (See photo) Over time hitch receivers get sloppy from use and can enlarge the 5/8” lock pin hole. In short, the end should be at least 7/8 to 1” in size to allow for hole slop. Another thing is it’s difficult to hold the end while turning the key. The quality seems good and I like that it’s made in the U.S.A., made of stainless steel, and its 3 5/8” length. However, due to the issues I mentioned above, I will be returning it. Don’t know what the manufacturer was thinking here and unsafe in my opinion.1640302

Click to Enlarge

Very cool hitch lock. If you’ve purchased the DrawTite class V with 2 1/2” receiver purchase this Infinite Rule
Hitch lock with 3 5/8 usable length. Do not get the one with 3 1/8” usable length as it is not quite long enough to lock on that receiver.1641147

I haven't had a chance to install it yet but compared to my other locking pin this one seems much better made. I really like how the lock works1676932

eTrailer is the bomb! 1678069

by: Brian11/29/2022

This hitch is made of stainless steel, and a quality made product. I have had this on my hitch for the past year and it is like brand new, working perfectly. I would order this lock again if I needed for another hitch.1475673

Ordered and came late thru UPS but arrived in good order. BW hitch is amazing. Fits excellent, look great. Simple to use as advertised. Great product so far.1507461

by: Robert06/30/2022

The lock mechanism seized up after being on the truck for a couple months. It is currently stuck on the truck. I’ve tried using PB Blaster to loosen it up which worked a little but not enough to unlock it. I will have to drill the lock when the time comes to remove it. Don’t buy this product.1317514

Jenny N.

7/14/2022

I know that you have used PB Blaster however I recommend giving this a try. Try spraying the solvent in and leave in for a while. Then try to rotate the lock and spray it again. Repeat for over 48 hours. The rotation will help ensure most interior surfaces get the solvent. Warming the lock housing may also help parking it in the sun during application or even using a hair dryer on it might help loosen corrosion after the solvent has had time to work.

by: John 06/22/2022

Great lock I just wished I was offered a keyed alike set for both the hitch and ball. So I can lock both with one key.1315831

Upgraded to an F250 with a 3 inch hitch receiver. My old receiver was 2 inch. Ordered adapter, stainless ball and 3 inch locking pin. All delivered promptly and top quality!933621

I use this lock on a 3" receiver hitch on my F350. The span on all of the other locks I've tried were to short and would not engage or lock in place.663574

Goes great with my B&W tow and stow on my 2022 Ford F3501137722

Solid compact design. Great choice to protect my investment!1533452

by: John 07/19/2022

Works great. E Trailer always delivers great products and service.1332728

Great lock for a 3" hitch! 1093315

Very happy with etrailer, customer service is great!!!917092

by: Vance 07/27/2022

It is a very good lock. I would buy it again.1339510

Works as designed, ordered wrong size so I'll use for the wife's vehicle.1340196

Great piece! fit well. Like the idea of screwing in the lock.1297530

Looks good and fit great 794973

This thing is sleek and has a very simple design that looks great.916090

Like it so far looks good and easy to i nstall902558

Awesome service ! Well organized and prompt delivery .....1239103

1394151

1759038

1610644