Recommended 48 Inch Hitch Extender For My 2021 GMC 3500 With A 3 Inch Hitch  

I have another option for you, but the TorkLift Cannon Hitch Extension - 3" Ford Super Duty Factory Hitch - 48" Long #TLE1648 you were looking at is only a fit for the factory 3" trailer hitch receivers on a 2017 or newer…

To use a TorkLift 48" hitch extender you will have to change out your receiver on your 2019 GMC Sierra 3500HD Denali. The TorkLift Cannon Hitch Extension #TLE1648 will only fit the 3" receiver that comes on the Ford Super Duty trucks. To…

No, replacing the chains and turnbuckles on the TorkLift Cannon Hitch Extension #TLE1648 is not recommended. And in the event you are trailer towing it would technically be illegal. The chains and turnbuckles are not open like the TorkLift Locking…

With a 10-1/2 foot long camper, you'll want a 32 inch extension. The #TLE1648 TorkLift Cannon Hitch Extension you'd looked at is only compatible with the Ford OEM 3 inch receiver hitch. The best solution for you will depend on the weight of…

The 48" TorkLift Cannon Hitch Extension #TLE1648 will fit just fine with the TorkLift tie-downs you have installed on your 2019 Ford F-350. The c-bracket that fits over the crosstube on your OEM hitch won't be fitting in the exact same spot…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…