bing tracking image
  1. Trailer Hubs and Drums
  2. TruRyde
  3. 4 on 5 Inch
  4. For 3000 lbs Axles
  5. Hub
  6. Agricultural
Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural

Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural

Item # AH15450ECOMP
Our Price: $86.98
Trailer Hubs and Drums
Shipping Weight: 9 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Hub is designed for use on idler axles with agricultural applications. Fits 3,000-lb axles. Inner bearing (LM67048) and race, outer bearing (LM11949) and race, grease seal, grease cap, and wheel bolts are included. Great Prices for the best trailer hubs and drums from TruRyde. Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural part number AH15450ECOMP can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (8)
  • Q & A (0)
  • Photos

TruRyde Trailer Hubs and Drums - AH15450ECOMP

  • 4 on 5 Inch
  • For 3000 lbs Axles
  • Hub
  • Agricultural
  • 1/2 Inch Stud
  • LM11949
  • LM67048
  • TruRyde

Hub is designed for use on idler axles with agricultural applications. Fits 3,000-lb axles. Inner bearing (LM67048) and race, outer bearing (LM11949) and race, grease seal, grease cap, and wheel bolts are included.


Features:

  • Trailer hub assembly fits idler axles
    • Hub is for agricultural applications
  • Grease seal, grease cap, (4) 1/2"-20 wheel bolts, and bearings are included - races installed on hub


Specs:

  • Application: 3,000-lb trailer axles with agricultural applications
  • Weight capacity: 1,500 lbs
  • Hub diameter: 6-1/2"
  • Bolt pattern: 4 on 5"
  • Pilot hole diameter: 3.62"
  • Use with spindle # AS1500E


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: LM67048 (1.250" inner diameter)
    • Outer bearing: LM11949 (0.750" inner diameter)
  • Races (included)
    • Inner race: LM67010
    • Outer race: LM11910
  • Grease seal (included):
    • Inner diameter: 1.50"
    • Outer diameter: 2.332"

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


AG-H6334500-1ZHA Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural

Replaces AH15450ECOMP





Customer Satisfaction Score:


Customer Reviews

Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural - AH15450ECOMP

Average Customer Rating:  4.8 out of 5 stars   (8 Customer Reviews)

Hub is designed for use on idler axles with agricultural applications. Fits 3,000-lb axles. Inner bearing (LM67048) and race, outer bearing (LM11949) and race, grease seal, grease cap, and wheel bolts are included.

by:

Review the Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural - AH15450ECOMP and axel stub worked as advertised and could not expect more. would purchase again.



by:

We are very satisfied with the parts we ordered. They arrived in a timely manner. You were the only ones we could find who carried this. Mahalo for that! Very satisfied customers!

Jessica

10/20/2020

Your product is still working beautifully! We are still very satisfied.



by:

Product came as promised. etrailer was very helpful on phone when I call them. Very satisfied with shipment. Came a day earlier than I expected. Thanks Steve for your service



by:

Great place to get trailer parts from.



by:

I can't believe how fast I got it.It save my plow days no delay at all!!!



by:

Fast shipping and product was just as described



by:



by:

Just what I needed


8
8

See what our Experts say about this TruRyde Trailer Hubs and Drums

  • Recommended Replacements for a Trailer Hub With an LM67048 Inner Bearing and LM11949 Outer Bearing
    It sounds like you have an agricultural style hub, like our part # AH15450ECOMP. In reality, replacement items are available for your current setup, but because you mention that this a boat trailer, your best option would really be to switch out to an EZ-Lube assembly. The current agricultural hub might hold up if you are just submerging them once or twice a season, but for repeated use you will really want to switch out the spindle, hub, and wheels. I would recommend going with EZ-Lube...
    view full answer...
  • Hub Recommendation for Spindle with Diameters of .75 and 1.25 inches
    From the measurements you gave me, it sounds like you have an Agricultural Spindle like # TRU54FR that uses # LM67048 Inner bearing and # LM11949 Outer bearing. For a hub assembly with a 4 on 5 bolt pattern # AH15450ECOMP will work and the bearings, seal and cap are included. I linked the parts along with a few review videos for you to reference.
    view full answer...
  • Replacement Hub With An Out Bearing And In Bearings That Measure .74" and 1.25" For 5 On 4.5 Wheel
    We do have a replacement hub that can work. Unfortunately, it is not a 5 on 4.5. The only replacement hub we have that will fit your axles. Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural, part # AH15450ECOMP. Going with these hubs will require you to get new wheels to match this lug pattern or cut off the spindles and weld on new spindles that will accommodate a different hub.
    view full answer...
  • Trailer Hub Needed for Redline Agricultural Spindle
    If the Agricultural Spindle # TRU54FR looks like it will work well for your application then the only trailer hub assembly we have that is compatible is the Redline # AH15450ECOMP.
    view full answer...
  • Replacing Hubs and Wheels on 1964 Alpine Sprite Camper Trailer
    Older classic trailers like your '64 Alpine Sprite may need new hubs in order to use the wheels and tires you wish for that vintage look. The only 4-bolt trailer hub/wheel bolt pattern we offer is the 4-on-4-inch format, like hub # AKIHUB-440-2-1K and wheel/tire # AM3S120. We do offer one agricultural hub in a 4-on-5-inch format, part # AH15450ECOMP, but this is for 3000-lb axles, much more than your trailer weighs. To use new hubs with the easy-to-find 5-on-4-1/2-inch bolt pattern you...
    view full answer...
    Image 1 for
  • Replacement Hubs For Trailer With 3/4 Inch Outer Diameter Spindle That Is Straight
    The only hub we have that is currently available for a 3/4 inch spindle is Item # AH15450ECOMP. This is an agricultural hub that fits 3,000 lbs axles for 4 on 5 inch bolt pattern. It takes an inner bearing, Item # LM67048, and outer bearing, Item # LM11949. It is meant to be used for low speed (less than 20 mph) agricultural applications. It is designed for a spindle like Item # TRU54FR. If you can find the actual bearing number on your old bearings and seal or can send me a bearing...
    view full answer...
    Image 1 for
  • Recommended Agricultural Hub w/ a 4 on 5 Bolt Pattern
    We have a couple of options for agricultural hubs that fit a spindle with an inner bearing size of 1.25" item # LM67048. I have listed them below: Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 item # AH15450ECOMP. This hub matches your current bolt pattern. It fits a 1.25" item # LM67048 inner bearing and a item # LM11949 0.750" outer bearing. Dexter Trailer Idler Hub Assembly for 6,000-lb Axles Agricultural item # 42660UC1. This hub has a 6 on 6 bolt pattern and fits Inner bearing...
    view full answer...
  • Replacement for Hub With LM67048 and LM11949 Bearings
    We have one hub that matches your bearing combination. The # AH15450ECOMP uses a # LM67048 inner and # LM11949 outer bearing. This hub is intended for 3,000-lb trailer axles with agricultural applications. The bolt pattern is also 4 on 5 so you will need to double check to see if that matches your current hub. If it is a 4 on 4 we don't have anything that matches.
    view full answer...
  • Replacement Trailer Hub that Uses Bearings with Inner Diameters of 1.25 and 0.75 Inches
    Based on the measurements you have provided hub # AH15450ECOMP is a close match. The bearings that it uses fit on spindles with the measurements you have provided. But the seal has an inner diameter of 1-1/2 inches. It is not uncommon for the seal inner diameter to be smaller to provide a tight fit. This is an agricultural hub so it isn't very common and being an aggie hub means it is limited to 20 miles per hour. It might be more beneficial to replace the axle on the trailer to get more...
    view full answer...
  • Agricultural Hub Availability
    It sounds like you have an agricultural hub like the part # TRU54FR that has a diameter of .75 where the inner bearing rides. You will need to measure the spindle of your trailer to verify this. Where the outer bearing rides will need to be 1.25 inches, the seal surface diameter 1.50 inches. The only hub we have to fit this hub would be the part # AH15450ECOMP.
    view full answer...
    Image 1 for
  • Replacement LM11949 Bearing and LM11910 Race Needed
    We do carry that bearing and race you're looking for: - Replacement Trailer Hub Bearing # LM11949 - Replacement Race for LM11949 Bearing # LM11910 When it comes to hubs that use this bearing we have a 2.5K and a 3K agricultural hub that use this bearing as well as the # LM67048 bearing: - Dexter Trailer Idler Hub for 2,500 lb Axles # DX22XR - Trailer Hub Assembly for 3,000 lb Axles # AH15450ECOMP The 2.5K has a 5 on 4-1/2" bolt pattern while the 3K is a unique hub that uses a 4...
    view full answer...
  • Replacing the Hub on an Older Homemade Trailer With Bearing LM11949
    The hub assembly we offer with bearing # LM11949 is an agricultural hub, # AH15450ECOMP. This hub is intended for agricultural use, and the outer bearing measurement you mentioned does not match the outer bearing used by this hub and spindle. This axle uses bearings that are nonstandard, so it may be easier for your to swap out the axle for a new one that uses standard bearings. I've added a link to a list of all our available axles to see if we have one that will work for you.
    view full answer...
  • Dimensions of AH15450ECOMP Agricultural Trailer Hub Assembly
    The hub face of the # AH15450ECOMP Agricultural Hub is 6-1/4 inches in diameter, and the overall depth is 4 inches. The hub has an inner hub bore diameter of 2.328 inches with an outer bore diameter of 1.781 inches. I've shown these dimensions in the provided photo. The hub has a 1500 lb each/3000 lb per axle, and is designed for low speed applications. The bolt pattern is 4 on 5 (4 lugs on 5 inches, center to center). The hub includes the inner and outer bearings and races, the grease...
    view full answer...
    Image 1 for
  • Is There a Trailer Hub/Bearing with 1.18 Inner Diameter
    I do have a possible solution for you in the Trailer Hub Assembly part # AH15450ECOMP which uses a LM67048 (1.250") inner bearing and LM11949 (.750') outer bearing. This hub has a 4 on 5" bolt pattern, it's commonly used in agricultural applications. It's the only hub we offer with this bearing combo. Unfortunately, we don't have any hubs/bearings which have a 1.18" inner diameter.
    view full answer...
  • Trailer Hub with Inner Bearing LM67048 Outer LM11949
    We do have a hub that fits with your bearing numbers with the # AH15450ECOMP but the hub you mentioned does not fit
    view full answer...
  • Availability of Trailer Hub that Fits Spindle with Bearing Diameters of .75 and 1.25 inch
    What you have is a pretty odd bearing combo but we do have an agricultural hub that does with the Trailer Hub Assembly # AH15450ECOMP which uses a unique bolt pattern of 4 on 5 inches.
    view full answer...
  • Replacement Axles for 1977 Giroux Tandem Axle Boat Trailer
    We do offer one idler hub kit that will fit your spindles, Redline # AH15450ECOMP, which has a 4-on-5 bolt pattern. In your 5-on-4-1/2 pattern we have no hubs that will fit your spindles. New hubs must use the same bearings in order to fit your spindles. You can have a qualified welder with the required jigs replace your spindles, or you can replace the entire axle assemblies. We offer beam axle kits as well as bolt-on axle-less suspension kits that can provide better ground clearance...
    view full answer...
  • Replacement Hub for Old Pontoon Boat Trailer With L11949 and LM67048 Bearings
    It sounds like your existing hub uses a LM67048 inner/LM11949 bearing. The only hubs we offer that would be compatible with that bearing set would be an agricultural hub like # AH15450ECOMP which is meant for low-speed use (20 mph or less) on equipment like implement wagons and other agricultural equipment that's not used on public roads. Since you have a pontoon trailer, your best bet would be to either have the spindles replaced with weld-on spindles that are compatible with modern,...
    view full answer...
    Image 1 for
  • Trailer Hub That Fits a Spindle With 1-1/4" Inner Bearing and 3/4" Outer Bearing
    The only hub that we have that fits an Inner Bearing # LM67048 (1-1/4") and Outer Bearing # LM11949 (3/4") is the Trailer Hub Assembly # AH15450ECOMP. This is only available in a 4 on 5" lug bolt pattern. To get to the 5 on 4-1/2" wheel pattern you will need to source a wheel spacer that adapts from the 4 on 5" bolt pattern.
    view full answer...
  • How To Determine What Hub Assembly is Needed With a Bearing Inner Diameter of 3/4 Inch
    The Dexter Trailer Hub Assembly - 4 on 4, part # 8-91-05UC1, uses the # L44649 bearing as the inner and outer bearings. The inner diameter of the bearing is 1.063 inches (1-1/16). The only bearing I have that has a 3/4 inch inner diameter is the Redline Bearing, part # LM11949, which is used as an outer bearing on the Agricultural Hub Assembly - 4 on 5, part # AH15450ECOMP. This is a hub that has a 4 on 5 inch bolt pattern and is used for low speed (less than 20 mph) agricultural applications....
    view full answer...
  • Availability of Hubs That Use Inner Bearing LM67048 and Outer Bearing LM11949
    We do not have any hubs or hub/drums in a 5-on-4-1/2 bolt pattern that use your particular bearings. The bearings in a replacement hub must match those in your originals in order for the hub to fit on your spindles. We do offer one idler hub that uses inner bearing LM67048 and outer bearing LM11949 and that is 4-on-5 bolt pattern agricultural idler hub # AH15450ECOMP. This hub kit includes bearings, races and a grease seal and it is rated for off-road use up to 20-mph.
    view full answer...
  • Solution for Replacement Short Idler Hubs for Boat Trailer
    The only hub that would fit your spindle that we carry is the Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural # AH15450ECOMP which is designed for agricultural use and uses a different bolt pattern. I recommend contacting the manufacturer of your boat trailer for a replacement since this does not seem to be a common hub or anything that is readily available. If you are unable to find a replacement, you may also consider replacing the axle that uses a standard hub. If you...
    view full answer...
  • Hub and Drum Assembly for 1 1/4 inch by 3/4 inch Axle
    1 1/4" by 3/4" axles use item # LM11949 as an inner bearing and item # LM67048 outer bearing. I recommend the Redline Trailer Hub Assembly item # AH15450ECOMP. These hubs are for agricultural applications and are rated for 3,000 lbs axles and have a 4 on 5 bolt pattern. This kit is sold individually so you will need to purchase two.
    view full answer...
  • Overall Height of Agricultural Trailer Hub AH15450ECOMP
    Sounds like you are asking for basically the overall height of the trailer hub part # AH15450ECOMP which is 4 inches like you can see in the attached diagram.
    view full answer...
    Image 1 for


< Previous



Do you have a question about this Trailer Hubs and Drum?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeff D
Installed by:
Jeff D
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Michael B
Written by:
Michael B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.