Replacement Hub With An Out Bearing And In Bearings That Measure .74" and 1.25" For 5 On 4.5 Wheel
Question:
Looking for a hub that can replace one with a .74 out bearing and a 1.24 inner. Lug is 5 on 4.5. is on a home made trailer so have no idea what it came off of.
asked by: Caleb
0
Expert Reply:
We do have a replacement hub that can work. Unfortunately, it is not a 5 on 4.5. The only replacement hub we have that will fit your axles. Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural, part # AH15450ECOMP. Going with these hubs will require you to get new wheels to match this lug pattern or cut off the spindles and weld on new spindles that will accommodate a different hub.
expert reply by:
Mark Smith
0
Product Page this Question was Asked From
Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Trailer Hubs and Drums
- Hub
- Agricultural
- LM67048
- LM11949
- For 3000 lbs Axles
- 1/2 Inch Stud
- 4 on 5 Inch
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Q&A: Replacement Hubs for Oddball Axle or Axle Replacement for Boat Trailer
- Q&A: Hub Recommendation for Trailer Spindle that Measures 1.25 and .75 inches
- Q&A: Solution for Replacement Short Idler Hubs for Boat Trailer
- Q&A: Trailer Bearing Availability with Inner Diameter of .75 inch and 1.25 inch
- Q&A: Replacement Trailer Hub for Flat Bed Trailer with 1.25 Inner and 0.75 Outer Bearings
- Q&A: Can the Agricultural Style 4 on 5 Inch Hubs Be Replaced with a More Common Bolt Pattern
- Q&A: Trailer Hub That Fits a Spindle With 1-1/4" Inner Bearing and 3/4" Outer Bearing
- Search Results: t1721400042
- Search Results: 5 on 4 3 4 hub
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: Most Popular Wheel Bearings
- Shop: Trailer Hitch
- Search Results: 25580
- Shop: Trailer Wiring
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: 68149
- Article: Trailer Tire Sizing
- Shop: Brake Controller
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Shop: Gooseneck Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Search Results: dust cap
- Shop: Grease Seals 10-36 (pair)
Explore Expert Info
![Our Expert]()
on Trailer Hubs and Drums
on Trailer Hubs and Drums
