Replacement Hub for Old Pontoon Boat Trailer With L11949 and LM67048 Bearings
Question:
I am looking for a hub to fit spindle with the following dimensions: A = 1.875 B = 1.684 C = 1.25 D = 0.75 E = 0.75 F = 0.25 Would also need bearings, seals and races. Hope you can help. Thanks, Steve
asked by: Steve K
Expert Reply:
It sounds like your existing hub uses a LM67048 inner/LM11949 bearing. The only hubs we offer that would be compatible with that bearing set would be an agricultural hub like # AH15450ECOMP which is meant for low-speed use (20 mph or less) on equipment like implement wagons and other agricultural equipment that's not used on public roads.
Since you have a pontoon trailer, your best bet would be to either have the spindles replaced with weld-on spindles that are compatible with modern, readily available parts or to replace the axle entirely.
If you'd care to reply with the capacity of your axle, I can recommend replacement spindles. For a replacement axle, I'd need to know the capacity of your current axle as well as its hub face to hub face dimension and the center to center distance between the spring seats. We offer some of the more popular sizes/capacity axles, and with that information, I'd be happy to look through what we offer to see if anything's compatible.
Products Referenced in This Question
Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Trailer Hubs and Drums
- Hub
- Agricultural
- LM67048
- LM11949
- For 3000 lbs Axles
- 1/2 Inch Stud
- 4 on 5 Inch
- TruRyde
more information >
Product Page this Question was Asked From
Agricultural Spindle for 3,000-lb Trailer Axles - 1-5/8" Diameter
- Trailer Spindles
- Agricultural Spindle
- 1-5/8 Inch Diameter
- Round
- For 3000 lb Axle
- TruRyde
more information >
Continue Researching
- Shop: Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Shop: Agricultural Spindle for 3,000-lb Trailer Axles - 1-5/8" Diameter
- Shop: Replacement Trailer Hub Bearing - LM67048
- Q&A: Dimensions of AH15450ECOMP Agricultural Trailer Hub Assembly
- Q&A: Titan Replacement for Dico Trailer Idler Hub 17214
- Search Results: btr spindle
- Search Results: lm67048
- Search Results: 5.70 8 trailer tire
- Search Results: l44649
- Search Results: 14125a
- Video: Review of TruRyde Trailer Spindles - Agricultural Spindle - TRU54FR
- Shop: Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Qty 2
- Q&A: Finding replacement hubs for boat trailer that uses inner bearing L68149 and outer bearing l44649
- Q&A: Replacement Bearings and Seal for Dexter Hub 8-147
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: Replacement Trailer Hub Bearing - 14125A
- Q&A: What are the Overall Dimensions of the Dexter Agricultural Hub Assembly # AH15450ECOMP
- Shop: Front Mount Hitch
- Article: My Trailer Hitch Doesn't Fit
- Video: Trailer Hitch Installation - 2000 Jeep Cherokee 13084
- Video: CE Smith Trailer Hubs and Drums - Hub - CE13511 Review
- Video: CE Smith Trailer Hub Assembly Review and Installation
- Video: etrailer Trailer Bearings Races Seals Caps - Bearings - LM67048 Review
- Video: Review of etrailer by AxleTek Trailer Axles - 2,000 lbs 60 Inch Long Axle with Idler Hubs - e25GR
- Video: etrailer Easy Grease Spindles Trailer Axle Beam Installation
- Q&A: Trailer Hub Recommendation with Bearings LM11949 and LM67048
- Q&A: Trailer Hub that Uses Bearing # LM67048 for Inner and Outer
- Search Results: axle
- Shop: Trailer Hitch