Replacing the Hub on an Older Homemade Trailer With Bearing LM11949
Question:
I'm looking for a replacement idler hub/wheel hub for my homemade boat trailer. Its a fairly old trailer and I purchased it second hand. The spindle diameter is 1.375 inches and goes down to 0.75 inches. I took out the bearing at the 0.75 inch section and the serial code on it shows LM11949. I can't find the serial code for the larger bearing for the 1.375 inch section. I'm looking to replace the entire hub. The spindle is still in good shape, but if need be I would change the spindle as well. Many thanks
asked by: Andre
Expert Reply:
The hub assembly we offer with bearing # LM11949 is an agricultural hub, # AH15450ECOMP. This hub is intended for agricultural use, and the outer bearing measurement you mentioned does not match the outer bearing used by this hub and spindle.
This axle uses bearings that are nonstandard, so it may be easier for your to swap out the axle for a new one that uses standard bearings. I've added a link to a list of all our available axles to see if we have one that will work for you.
Products Referenced in This Question
Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Trailer Hubs and Drums
- Hub
- Agricultural
- LM67048
- LM11949
- For 3000 lbs Axles
- 1/2 Inch Stud
- 4 on 5 Inch
- TruRyde
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - LM11949
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- .750 Inch I.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - No Drop - 4 Bolt Flange - 2,200 lbs
- Shop: Pro Series Round, Pipe-Mount Swivel Jack w/ Footplate - Sidewind - 15" Lift - 5,000 lbs
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Draw-Tite Ball Mount for 2" Hitches - 5" Rise, 6" Drop - 10-1/4" Long - 16K
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Search Results: trailer brakes
- Video: Deka Wiring 10-2-1 Review
- Video: DeeZee Trailer Toolbox - A-Frame Trailer Toolbox - DZ91717P Review
- Video: Dexter Nev-R-Adjust Electric Trailer Brake Kit Installation
- Q&A: How Much does the Dexter 12-1/4 Inch x 3-3/8 Inch Electric Brake Assembly # 23-451 Weigh
- Search Results: 2" draw bar
- Search Results: 331~tpsi~001
- Search Results: bearings
- Search Results: trailer hubs and drums
- Search Results: 10~2~1
- Search Results: 10 2 1 wire
- Video: Spectro Trailer Wiring Junction Box Installation
- Q&A: How To Connect Electric Trailer Brake Assemblies To Junction Box On Trailer
- Video: Review of Dexter Axle Trailer Brakes - Electric Drum Brakes - K23-472-473-00
- Video: Dexter Axle Trailer Brakes - Electric Drum Brakes - 23-468-469 Review
- Video: Timbren Axle-Less Trailer Suspension System Test Course
- Q&A: 4 Hole Brake Mounting Flange Dimensions for 10 Inch Brake Assembly
- Q&A: Mounting Bolt Pattern of 10 Inch Electric Drum Brake Assemblies
- Q&A: Dimensions for a Brake Mounting Flange for a 3 Round Axle
- Article: Most Popular Wheel Bearings
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Option For Karavan Trailer Winch Stand
- Q&A: What is the Difference Between the 10-10 Grease Seals and the 10-36 Grease Seals