Dexter Trailer Hub Drum Assembly - 9K to 10K - 8 on 6.5 - Oil Bath - Non-ABS Drum - After July 2009
(24 reviews)
Price: $676.59
Dexter Trailer Hub Drum Assembly - 9K to 10K - 8 on 6.5 - Oil Bath - Non-ABS Drum - After July 2009
Item # 8-430-5UC3
Retail:$1,108.02
Our Price: $676.59
You Save: $431.43
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (24)
- Q & A (0)
- Photos
Dexter Trailer Hubs and Drums - 8-430-5UC3
- 8 on 6-1/2 Inch
- For 9000 lbs Axles
- For 10000 lbs Axles
- Hub with Integrated Drum
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Oil Bath
- 25580
- 387A
- Dexter
Hub-and-drum assembly fits 9K to 10K axles manufactured after July 2009. Inner bearing (387A) and race, outer bearing (25580) and race, oil cap with plug and seal, wheel retaining ring, lug nuts, and studs included. Drum is for non-ABS brakes.
Features:
- Trailer hub-and-drum assembly non-ABS provides surface area for brake shoes to grip when brake is activated
- Compatible with electric and hydraulic drum brakes
- Oil bath lets you check lubricant level without disassembling the hub
- Look through clear oil cap to check lubrication
- Sturdy iron construction
- Bearings, races, oil seal, oil cap, wheel bolts, and lug nuts are included
- Hub and drum are made in the USA
Specs:
- Application: Dexter 9,000-lb and 10,000-lb general duty axles
- Works with axles manufactured after July 2009
- Wheel size: 16" to 17-1/2"
- Bolt pattern: 8 on 6-1/2
- Pilot hole diameter: 4-3/4"
- Drum size: 12-1/4" x 3-3/8"
- Weight capacity: 5,000 lbs
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: 387A (2.250" inner diameter)
- Outer bearing: 25580 (1.750" inner diameter)
- Races (included)
- Inner race: 382A
- Outer race: 25520
- Unitized oil seal (included): 10-51
- Inner diameter: 2.875"
- Outer diameter: 3.880"
- Oil cap kit (included): RG04-300
- 21-88 Cap
- 10-163 O-ring
- 46-32 Plug
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
008-430-90 Dexter Hub and Drum Assembly for 9,000-lb to 10,000-lb Axle with Hardware - 8 on 6-1/2 - Oil Bath - Non-ABS
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Dexter Trailer Hub Drum Assembly - 9K to 10K - 8 on 6.5 - Oil Bath - Non-ABS Drum - After July 2009 - 8-430-5UC3
Average Customer Rating: 4.3 out of 5 stars (24 Customer Reviews)
Hub-and-drum assembly fits 9K to 10K axles manufactured after July 2009. Inner bearing (387A) and race, outer bearing (25580) and race, oil cap with plug and seal, wheel retaining ring, lug nuts, and studs included. Drum is for non-ABS brakes.by: William06/17/2022
The rating is for etrailer, not the product. The Dexter hub and drum assembly was fine, etrailers way of doing business is not. The estimated ship date kept changing due to a "location in warehouse" issue. It took 2 weeks before they shipped it out. Bottom line, if you need something in a timely fashion, look elsewhere.
by: 01/21/2023
Missing all the pieces
by: Joseph 08/20/2022
great time of shipment so i can get my trailer back on road .will defnetely use you again thanks stacy happy camping wish i were camping with you joseph
by: Dave03/10/2021
Everything arrived in a timely manner. However one of the bearings was damaged half of the Lugnuts were missing because the box that was shipped in was destroyed by the time it got to me. Didn’t have time to deal with having new stuff sent I was able to get a new bearing locally other than that fit was good
by: Taciano03/01/2022
Still running good after 1 year. Probably around 90k miles on it so far. No complain
by: Mark 08/23/2022
Everything fit perfect. Made a tough job in remote worksite quick and easy.
by: Mickey08/27/2020
Great product and quick delivery
by: Jeffery09/10/2018
Parts arrived in time and was just what we needed. Quick and accurate ordering system.
by: Joseph 07/21/2023
by: Greg 09/19/2022
by: J Carmen10/20/2022
by: Brian 08/27/2021
by: Brian 12/01/2022
by: Jesse11/18/2021
by: Kevin12/20/2022
by: Jaime 04/24/2023
by: John 07/07/2022
by: Joe 07/06/2022
by: Johnny 11/01/2022
by: Jacob 09/14/2021
by: Jason12/29/2021
by: Wilfredo 11/11/2021
by: Matthew 08/19/2020
by: Bradley 03/03/2021
24
24
See what our Experts say about this Dexter Trailer Hubs and Drums
- Easiest Way to Find the Correct Replacement Hub and Drums for a Gooseneck Trailer The best way to find what hubs you need for your gooseneck trailer would be to get underneath it and look for an axle tag. On this tag would be a weight rating which would lead you to the correct hubs. For example, since you have a 40' gooseneck trailer, you probably have at least 9-10K axles which would mean that you could use the Dexter Trailer Hub and Drum Assembly for 9K to 10K Axles # K08-288-90. These'll work with axles made before July of 2009, so if you yours were made after,...
view full answer... - Difference Between Dexter 008-430-05 and 8-430-5UC3The Dexter # 8-430-5UC3 and 008-430-05 are the same hub and drum assembly. They use the same bearings and seals, the same oil cap kit, have the same capacity, and fit axles manufactured after 2009. The only difference between the part numbers is that the # 8-430-5UC3 is the full kit that comes with everything. The bearings, races, oil seal, and oil cap kit are all included. The 008-430-05 does not include these, or in some cases comes with only the bearings and races.
view full answer... - Replacement Hub and Drum Assembly for a Dexter 10K General Duty Axle 387A Inner and 25580 OuterWe have exactly what you are looking for. If your axles were made before 07-01-2009, then you have the old style 2-piece hub and drums, so you will want the Complete Hub Assembly, # 8-288-3UC1. Keep in mind, this does not include the drum. If you also need the drum, then you will want part # 9-44-1 for a non-ABS drum or part # 9-44-3 for a drum with the ABS exciter ring installed and 8 drum mounting bolts, # 7-245. The hub assembly comes with the races already installed and it includes...
view full answer... - Can Dexter 10k Disc Brake Setup be Converted to Electric Drum BrakeYes, you can replace the hub and brake components of a Dexter 10k axle with drum components to convert it to electric drum brakes. For that you'd need the hub/drums part # 8-430-5UC3 and then for the brake assemblies # 23-450-451 and you'd be set in that regard. You'd need to run 10 gauge or thicker wire to each assembly which we offer with the part # 10-1-1.
view full answer... - Converting Hydraulic Brakes To Electric On Tri-Axle Livestock TrailerMost hubs are compatible with electric and hydraulic brakes. The 10,000 lb axle 12-1/4 inch diameter Dexter hub and drum assembly part # 8-430-5UC3 that we carry is hydraulic and electric brake compatible which may be what you have. If you can tell me the part number of the Dexter hubs and drums you have specifically I can find out if they are compatible. If your hubs are compatible, I recommend Dexter Electric Brake Kit part # 23-434-435. These Dexter brakes measure 12-1/4" diameter...
view full answer... - Availability of Spindle and Hubs for 10,000 lb Trailer AxleAs you may have noticed, the highest capacity spindle we carry is for a 7,000 lb axle, # TRU37FR. Your best bet is to source the spindles for a 10,000 lb axle through a local trailer shop or dealer. If are able to source the spindles, we do have hubs for 10,000 lb axles. I'll list them below: # 8-430-5UC3 - Dexter Hub Drum for 9K to 10K axles manufactured after July 2009 (for non ABS brakes) - uses inner bearing # 387A, outer bearing # 25580 and oil seal # 10-51 # K08-288-90 - Dexter...
view full answer... - Replacement Hub Drum for Dexter 10k AxleYou could take the drum to a machine shop that can turn drums to see if it's good or bad, but typically if you can tell yours is warped it's probably time to replace it. For a 10k Dexter brake drum we have the part # 8-430-5UC3 which is an exact replacement.
view full answer... - Hydraulic Drum Brake to Electric Drum Brake Conversion for Gooseneck Trailer w/ 10,000 LB AxlesYes, you can convert the hydraulic drum brakes to electric drum brakes on your gooseneck trailer. I have included the link to all of our electric brake assemblies for a 10,000 lb axle. Just use the filters on the page to see if we have one that will work for you. I do recommend replacing your hub/drum assembly as well because not all hub/drum assemblies will work with both hydraulic and electric brake assemblies. We only offer one option for a 10,000 lb axle and that is part # 8-430-5UC3....
view full answer...
- What Size Drive-In Studs are Used on Hub #8-430-5UC3Trailer Hub Assembly # 8-430-5UC3 comes with 5/8 inch diameter drive-in studs. These are available separately in a set of 4, # RG03-120. I have linked the studs to this page for your convenience.
view full answer... - Replacement Oil Seal and O-Ring for Dexter Drum Hub with Oil BathThe Dexter Trailer Hub and Drum Assembly - 9,000-lb to 10,000-lb - 8 on 6-1/2 - Oil Bath - Non-ABS Drum # 8-430-5UC3 does have replacement parts so you can absolutely purchase the seal and o-ring separately from the entire hub. The seal is the Unitized Oil Seal # 10-51 and the o-ring is # 92127. If you want the entire too the Replacement Oil Cap Kit for 9,000-lb and 10,000-lb Dexter Axle # RG04-300 consists of the cap, the plug, and the o-ring. If you need more oil, I recommend the Kodiak...
view full answer... - Is Dexter Trailer Hub/Drum Assembly # 8-430-5UC3 a 1-Piece or 2-Piece AssemblyDexter Trailer Hub/Drum Assembly # 8-430-5UC3 is a one piece assembly, hub and drum together. It fits Dexter 9k and 10k general duty axles made after 07/01/2009. Hub # 8-288-3UC1 is a 2 piece for 9K axle (after 10/89) and 10K axle (through 7/1/09). It does not come with the drum or mounting bolts. For a non-ABS drum use # 9-44-1. For an ABS version use # 9-44-3. And for the mounting bolt use # 7-245 (quantities of 1).
view full answer... - Do You Have Trailer Hub Assemblies Rated For 8,500 lb Capacity?We currently have two trailer hub assemblies that will work with that weight capacity. We have the Dexter Trailer Hub/Drum Assembly - Non-ABS Drum - 9,000 - 10,000-lb Axles - 8 on 6-1/2 - Oil Bath # 8-430-5UC3 and the Dexter Trailer Hub Assembly - 9,000-10,000-lb Axles - 8 on 6-1/2 - Oil Bath # 8-288-3UC1 which is an idler hub (no brakes). Both assemblies use the 2.250 inch inner diameter for inner bearing and 1.750 inch inner diameter for the outer bearing. The oil seal has an 2-7/8...
view full answer...
- Electric Drum Brake and Hub/Drum for 10K AxleI linked our main page for all electric drum brakes rated for a 10K axle. These are all 12-1/4-inch diameter but vary in width; 3-1/2-, 3-3/8- and 4-inch widths are available. We have these in both manual-adjust and self-adjust types. For example, part # AKEBRK-10 is a high-value pair of self-adjusting left- and right-hand brakes in the 12-1/4 x 3-3/8 inch size which fits wheels 15-inches in diameter and larger. These brakes use a 7-bolt mounting pattern. We do offer a 10K oil bath type...
view full answer... - Replacement Bearings and Seal for Dexter 10k Trailer HubThe bearings you need are # 387A for the inner bearing, # 25580 for the outer bearing, and for the seal # 10-51 since we know you have a 10k Dexter axle. For brake assemblies you'd need the part # 23-450 for the left hand side and part # 23-451 for the right hand side. For a hub you'd need # 8-430-5UC3.
view full answer...
- Determining the Weight Capacity of Axles and If Hubs Are AvailableUnfortunately we don't carry hubs above 10K. The largest hubs we carry are 9K-10K Dexter Hub and Drum Assemblies # 8-430-5UC3. I have no way of knowing what hubs may work on your trailer unless you measure the spindles using a digital caliper like # PTW80157. I've attached a photo to assist with the locations. These measurements will possibly help to determine the capacity of your axle, but any hubs that may fit will limit your axle capacity to the max capacity of the hubs.
view full answer...
- Timbren Axle-Less Trailer Suspension System w/ Electric Brake Hubs to Replace 2800 lbs Dexter AxleThanks for the pictures, they were very helpful. I have a great solution for you but no, they do not make one piece axle and brake assemblies that will fit your spring spacing. I recommend the Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs item # A35RD545E. The individual suspension units replace your existing axle and operate independently. The 4" drop spindle should match up with your existing axle and provide the same ride height. They will fit any frame width and...
view full answer...
- Do I grease Bearings Or Just Add Oil After I Have Replaced The Bearings?Hello Jon, your BigTex 22' Gooseneck trailer uses oil bath hubs correct? If so, you will not add any grease, you will simply add oil after you replace the bearings.
view full answer... - Replacement Hub Options For a Dexter D1012 With Bearings 387A and 25580Here is your options for a Dexter D1012 with the Inner Bearing # 387A, Inner Race # 382A, Outer Bearing # 25580, and Outer Race # 25520. Idler Hub Prior July 2009 # 8-288-3UC1 Idler Hub After April 2013 # 008-430-03 Hub/Drum Prior July 2009 # K08-288-90 Hub/Drum After July 2009 # 8-430-5UC3 All but the Idler Hub After April 2013 # 008-430-03 include all the bearings and seals. For this you will have to also add the following components for each hub. Inner Bearing # 387A Inner Race #...
view full answer... - Replacement Wheel Studs for Dexter P-12 D90 AxleThanks for the photo. It gives me the further information needed to assist. The P-12 only gives the factory location from Dexter. The D-90 model is a huge help as it designates is a 9k axle. The correct hubs you would need for your Dexter D-90 axle is the part # 8-430-5UC3. Then the wheel stud replacements are # 7-223 for a 2 inch length or # 7-257 for a 2-1/2 inch length.
view full answer...
- Replacement Brake Assemblies for Dexter 10k Axles on Gatormade TrailerWe have what you need! Thanks for the photos. Even though the serial number is torn from the axle tag, we still identified the brakes you need with the Unique ID Number 124394998016 from your 10k Dexter axle tag. I confirmed with my tech at Dexter that you need the Dexter Electric Trailer Brake Assembly - Self-Adjusting - 12-1/4" # 23-450 (left side) and the # 23-451 (right side). These are direct replacements of brakes constructed for your 10k Dexter axles on your Gatormade trailer.
view full answer...
- Correct Replacement for Dexter 9-123 DrumThe Dexter Trailer Hub Drum Assembly part # 8-430-5UC3 I do show as the correct replacement for the Dexter 9-123 Drum.
view full answer... - Is Dexter Hub Drum Assembly # 8-430-5UC3 Available in Individual Parts?The Dexter Trailer Hub Drum Assembly - 9K to 10K - 8 on 6.5 - Oil Bath - Non-ABS Drum - After July 2009 # 8-430-5UC3 comes as the complete kit and the hub/drum is not available separately. The bearings, races, seals, and caps are available separately: Inner Bearing # 387A Outer Bearing # 25580 Inner Race # 382A Outer Race # 25520 Oil Seal # 10-51 Oil Cap Kit # RG04-300
view full answer... - 10k Dexter Replacement Hub for a 8-415I did some checking and the hub/drum we offer that will work for you is the part # 8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS setup. The part number for the ABS version is part # 8-430-7 which we do not carry at this time.
view full answer... - Replacement Brake Assemblies for Dexter Trailer Hub 8-415I was able to cross reference the Dexter Hub/Drum 8-415 to the Dexter Trailer Hub Drum Assembly part # 8-430-5UC3 which should be an exact replacement. Which means for braking assemblies, the best option we have is the Dexter Brake Kit part # 23-450-451 or part # 23-410-411.
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Written by:
Laura H
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Hannah L
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brooke M.
1/25/2023
Thank you letting us know! I have already sent your information to our customer service team and am happy to see they have been in touch with you.