Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 7,000-lb axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and nuts for 1/2" studs included.
Features:
Specs:
This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.8 out of 5 stars (64 Customer Reviews)
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 7,000-lb axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and nuts for 1/2" studs included.etrailer really stands behind what they sell, we had a small problem and they made it right, appreciate their service.
the center hub is slightly undersized, therefore the rim(and trailer weight) is riding on the studs, not the hub center. The weight should ride on the hub center, the studs only hold in together, not supposed to bear the gross vehicle weight.
I also bought the decorative cover, however it comes with hardware for studs larger than 1/2", so can't affix it to trailer.
Jenny N.
4/14/2022
You mentioned that the rim or trailer weight was riding on the studs. I wanted to let you know that it correct, most trailer hubs and rims are lug centric versus hub centric. So, the weight will be on studs. I think that the issue could lie in the lug nuts that are being used. What size lugs nuts do you have?
Caleb
4/14/2022
The lug nuts are the ones that came along with the order, 0.5 inch studs, nut takes thirteenth sixteenth socket. If something is wrong, it all came as a package
Jenny N.
4/14/2022
I have an answer for you and I hope that I can explain it clearly. The lug nuts that come with the hub assembly to match the studs are 0.5 inch - 20 with a conical thirteenth sixteenth outer diameter. The hub cover part # PXQT965CHN is meant to be used with lug nuts that would be 1.06 inches long. The only lug nut that comes in that size would be a five eighths lug nut which would not fit with the hub assembly that you have. A hub cover that would work for you would be part # PXQT765BHN. It is similar in design to the one that was ordered however it only comes in black.
Replaced the old hub because the outer bearing race was loose. The new hub went right on and fit perfectly!!
I received all the parts in a very quickly Manor For our trailer we ordered complete brake lining assembly all new hubs bearings and seals .shipping was very very fast all the parts that we ordered look like a very good quality part.everything fit just like it was supposed to communication was very good with the seller and we will definitely be buying more parts from this company Or equipment is up and running.
Grease seal damaged during shipping. Not etrailers fault as it was prepackaged item but still
Good fast service!
The brake assemblies and drum/Hubs were a perfect fit thanks to etrailer customer service taking the time on the phone to make sure I measured and ordered the correct parts. I made two mistakes during installation. Put a left brake assy on right side and had to take everything off again. Although they were packed tight, because of rough shipping one brake shoes self adjustment cable (the last one I installed) was disconnected and had to be re-connected, and since I did not inspect all the parts before beginning (second mistake) I had to look on etrailer's web site to see how it was assembled. It took time out of the job and grease on my laptop. If you don't make mistakes, it is EASY. Thanks etrailer.
Cost a little more than some I've found on line but the quality and service was well worth it. I was surprised at how fast I received it and the package along showed that they took pride there products
David
6/5/2021
Perfect
Made the job easy.New parts went right on.
Great hub assembly
Excellent fit. No issues. Plan on using in on a hay trailer.
The parts came in fast it was a direct fit on a fifth wheel camper with a 7000 pound axial if I need another wheel hub I will order one from this place great buy and great fit
I just ordered 4 huds for my trailer on Monday and got them Friday, everything was well packed and top notch. I just got done installing them, couldn't wait to see how they fit. Shouldn't have worried everything fit like a glove and I'm ready to go out and get my fire wood.
Every product I have ordered has been the same quality. I won't order from anyone else. George check with me to see if everything arrived and to see if I was satisfied. Where do you get service like that any where else?
worked great
The hub and drum assembly went on just as advertised. Looks like a good product and shipped quickly.
ups had difficulty delivering had to go to ups store to retrieve no problem hubs were packed well bearings fit perfect will be doing alot more business with these folks
Items arrived earlier than expected. Saved me about $1000 doing the brakes, drums and bearings myself.
Was exactly what I expected. Came already greased and had a new cap. Only thing not included is the washer, nut and cotter pin.
The lugs were smaller than the exact fit I had to buy all new lugs
I just want to say that the shipping time frame was absolutely great. Super quick delivery. I needed the hubs for a long range trip.
The hubs are heavy so the packaging suffered as the front of the hubs pushed through the side. The hubs were fine but you might get an extra layer of cardboard or maybe a polymer sheet inside to prevent the push through? Thanks again for the great service.
Product looks good and packing was great
Brake drum and bearings. Very good quality...fit perfectly.
These drums appear to be a quality drum at a mid level price. eTrailer is my go to spot for anything to do with trailers.
As advertised. Has been fine no issues. Arrived quickly.
Paul P.
5/25/2022
Working as should no issues
Perfect match to the trailer and fast shipping .
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Roy
11/15/2023
A year later and all is well, etrailer is still my first choice.