Dexter Trailer Hub and Drum Assembly for 8,000-lb E-Z Lube Axles - 12-1/4" - 8 on 6-1/2
(18 reviews)
Price: $500.77
In Stock
Dexter Trailer Hub and Drum Assembly for 8,000-lb E-Z Lube Axles - 12-1/4" - 8 on 6-1/2
Item # 8-285-11UC3
Retail:$687.40
Our Price: $500.77
You Save: $186.63
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (18)
- Q & A (0)
- Photos
Dexter Trailer Hubs and Drums - 8-285-11UC3
- 8 on 6-1/2 Inch
- For 8000 lbs Axles
- Hub with Integrated Drum
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- EZ Lube
- 9/16 Inch Stud
- 02475
- 25580
- Dexter
Install this hub-and-drum assembly on your trailer. Hub fits 8,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (02475) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
- Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
- Compatible with electric and hydraulic drum brakes
- E-Z Lube-compatible grease cap makes lubricating bearings fast and easy
- Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
- Sturdy iron construction
- Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
- Hub and drum are made in the USA
Specs:
- Application: 8,000-lb E-Z Lube trailer axles with #42 spindles
- Drum dimensions: 12-1/4" diameter x 3-3/8" wide
- Works with 12-1/4" brake assembly
- Bolt pattern: 8 on 6-1/2"
- Wheel stud diameter: 9/16"
- Pilot hole diameter: 4-3/4"
- Weight capacity: 4,000 lbs
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: 25580 (1.75" inner diameter)
- Outer bearing: 02475 (1.25" inner diameter)
- Races (included)
- Inner race: 25520
- Outer race: 02420
- Grease seal (included): 10-36
- Inner diameter: 2.25"
- Outer diameter: 3.376"
E-Z Lube-Compatible Assembly for Simple Lubrication
The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
K08-285-95 Dexter 12-1/4" Hub and Drum Assembly for 8K Axle with Hardware - 8 on 6-1/2 - EZ Lube
Replaces 8-285-11UC3
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Alternate product found
Customer Reviews
Dexter Trailer Hub and Drum Assembly for 8,000-lb E-Z Lube Axles - 12-1/4" - 8 on 6-1/2 - 8-285-11UC3
Average Customer Rating: 4.7 out of 5 stars (18 Customer Reviews)
Install this hub-and-drum assembly on your trailer. Hub fits 8,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (02475) and race, grease seal, grease cap, wheel bolts, and lug nuts included.by: Jeff02/28/2024
GOT THE RIGHT PARTS ONCE I TALKED TO SOMEONE WHO KNOWS WHAT THEY ARE DOING ARTHUR SENT ME THE WRONG ONES FIRST TIME
by: Steve s Truck05/18/2023
Fast shipping and quality products. We run a small business and just started with them, by far better pricing at my reg vendors. Great communication!!!
by: John 11/30/2022
Exact replacement for a worn-out drum. Super fast shipping!!
by: 10/07/2022
Grease seal was smashed beyond use upon arrival.
by: Jeff12/18/2010
Parts for my old dexter axlesAfter auto parts, trailer dealers and mechanics shops failed me, I found the part on Etrailer. It came quickly, with all the hardware and was $100 less than the trailer dealer told me it would cost if he could even find one. Great job, etrailer.
by: Hans 01/14/2023
Fast delivery
by: HV Gore08/28/2019
Great service , fine product, will be back again
by: Richard 12/05/2021
All parts came in as exspected and pricing was good and the customer service was very helpful
by: Brian T.02/23/2017
excellent to do business with! good prices! fast shipping!
by: Doug Jones07/23/2016
Worked good .
by: Deler07/09/2021
by: Gehrig02/03/2022
by: Kaleb05/19/2023
by: Jim 05/05/2023
by: Larry 08/28/2022
by: Andy 01/26/2023
by: Fred 11/25/2021
by: Davella08/06/2021
18
18
See what our Experts say about this Dexter Trailer Hubs and Drums
- Quantity on Dexter Trailer Hub and Drum Assembly 8,000lbYes, it is priced per drum. Dexter Trailer Hub and Drum Assembly Part # 8-285-11UC3 comes with everything you need to install. Check out the video I've included to see everything that comes with.
view full answer... - 8k Dexter Hub/Drum Recommendation for Trailer with 8 on 6-1/2 inch Bolt PatternWhat you are looking for is the part # 8-285-11UC3 which is an 8k Dexter hub/drum with an 8 on 6-1/2 inch bolt pattern, an EZ lube grease cap, and 9/16 inch wheel studs.
view full answer... - Can 7.2k Axle Trailer Hub Be Replaced with 8k Trailer Axle HubTrailer hubs that are designed to fit 7.2k axles and 8k axles use the same size spindle so if you wanted to go with an 8k hub in place of your 7.2k hub you certainly could like with the # 8-285-11UC3 which has an 8 on 6-1/2 inch bolt pattern with 9/16 inch diameter wheel studs.
view full answer... - Availability of Hub/Drum for 8k Axle with Grease Instead of Oil BathWe have the Dexter hub part # 8-285-11UC3 which is an 8k trailer hub with an 8 on 6-1/2 inch bolt pattern that uses grease instead of oil bath.
view full answer... - How do Trailer Studs Get Replaced on Trailer HubsMost are press in studs on trailer hubs. You'll need to hammer out the old ones by hammering directly on the top of the studs until they back out the backside and then hammer in the new ones through the same holes. I attached a link to a page that has all of the drive in studs we offer.
view full answer... - How to Tell if Trailer Hub 8-258 Will Fit SpindleWe do have the Dexter trailer hub and drum part # 8-285-9UC3 which might work but you would need to verify a few things. This is an 8k oil-bath hub with a bolt pattern of 8 on 6-1/2 inches. The bearings it takes are 25580 Inner / 02475 Outer. You would need to pull the hubs you have to get the bearing numbers or the dimensions where the bearings ride. If those dimensions are 1.74 inch and 1.25 inch this hub would fit.
view full answer... - Availability of Dexter EZ Lube Spindle Nut 006-190-00We do have what you are looking for but it is our part number # 6-190.
view full answer... - Availability of Electric Brake Drum Assembly for # 8-285-11 Dexter Trailer Hub and DrumThe Dexter Trailer Hub & Drum Assembly, part # 8-285-11UC3, that you have referenced, is the # 8-285-11 hub and integrated drum with the bearings, races, seal, cap, and lug nuts for a Dexter 8,000-lb axle. The electric brake drum assembly that fits the 8-285 hub and integrated drum would be the Dexter Electric Brake Assembly-Left Hand, part # 23-434, for the left side and Dexter Electric Brake Assembly-Right Hand, part # 23-435. These brake assemblies are for use on 8,000-lb and 9,000-lb...
view full answer... - Is Dexter 8-285-11UC3 Brake Drum Compatible with Hydraulic Trailer BrakesThe Dexter # 8-285-11UC3 brake drums are indeed compatible with either electric or hydraulic brake assembles. Your existing drums would work perfectly with the # 23-402-403 Dexter Hydraulic Drum Brake Kit. I would recommend that you inspect the inside diameter of the drums to make sure they are smooth and in good shape.
view full answer... - Replacement Hub Bearings for 1983 Tandem Axle Motorhome with 02420 Outer RaceThe outer race # 02420 that you found is used with the # 02475 bearing, which features an inner diameter of 1.250 inches. I recommend measuring the inner diameter of your exiting outer bearing with a digital caliper to make sure this matches. When used as an outer bearing it is typically seen on 8,000 pound trailer hubs like the Dexter # 8-285-11UC3, which uses the inner bearing # 25580 (1.750 inch inner diameter). You can again take a few measurements on your existing hub to verify this...
view full answer... - Compatibility of Electric Trailer Brake with Dust Shield With Dexter 8-285 HubsYes, the Electric Trailer Brake with Dust Shield - Self-Adjusting # AKEBRK-8R and # AKEBRK-8L are compatible with a Dexter 8-285 hub like the Dexter Trailer Hub and Drum Assembly # 8-285-11UC3. This hub and drum assembly has a 12-1/4" x 3-3/8" drum and works with any 8,000 lb 12-1/4" brake assembly.
view full answer... - Replacement Hub and Drum Assembly Recommendation for 8K Dexter Axle BrakesYou'll need either of the 8K hub and drum assemblies below: - 9/16" Wheel Studs # 8-285-11UC3 - 5/8" Wheel Studs # DX46XR Just choose the correct matching wheel stud size and you'll be good to go! Current pricing can be found directly on their corresponding products pages.
view full answer... - Is Dexter 12-1/4 x 5 Brake Assembly # 23-446 Compatible with Dexter Hub/Drum Assembly # 8-285-11UC3I did not find any purchase history for you but the electric drum brake that you referenced, Dexter # 23-446, is a left-hand 12-1/4 x 5-inch-wide brake. Its matching right-hand part is # 23-447. The hub/drum you referenced, Dexter part # 8-285-11UC3, is a 12-1/4 diameter x 3-3/8-inch-wide hub. These parts do not work together. The brake is rated for 15,000-lb axles while the hub/drum is rated for 8000-lb axles. Both their sizes and weight ratings are incompatible with each other. You will...
view full answer...
- Recommended Brake Flange, Brakes, And Hub And Drum For 8,000-lb AxleTypically, a 3-1/2 inch diameter axle like you said you have on your trailer is an 8,000-lb axle. The brake mounting flange on the axle that is designed for a 3-1/2 inch axle is part # 4-50. The flange mounting holes measure 3-3/8 inches between the left and right holes and 3-5/8 inches between the top and bottom holes. The hub and drum we offer that is designed for 8,000-lb axles is part # 8-285-11UC3. This includes the drum, bearings, races, seal, cap, and lug nuts. For electric...
view full answer... - Replacement Hub For Dexter Drum, 8-285, And Replacement Right-Hand Brake Shoes, 12-1/4" X 3-3/8"The replacement brake drum you need is Dexter Trailer Hub and Drum Assembly for 8,000-lb E-Z Lube Axles - 12-1/4" - 8 on 6-1/2, part # 8-285-11UC3. The hydraulic brake shoes you need are the Replacement Brake Shoes for Dexter 12-1/4" Duo-Servo Hydraulic Brake Assembly - Right Hand, part # BP04-270. I have included product description links
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Hannah L
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.