Easy Grease Trailer Hub and Drum Assembly for 8K Axles - 12-1/4" Diameter - 8 on 6-1/2

etrailer by AxleTek Trailer Hubs and Drums - AKHD-865-8-EZ-K

Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 8K E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (02475) and race, grease seal, grease cap, and lug nuts included.

Features:

• Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
  • Compatible with electric and hydraulic drum brakes
• Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
  • Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
• Sturdy iron construction
• Zinc-enriched paint on drum adds durability
• Black phosphate finished bolts deter rust
• Bearings, races, grease seal, grease cap, and lug nuts are included
• QAI and CSA certified

Specs:

• Application: 8,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #42 spindles
  • Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
• Actual drum dimensions: 12-1/4" diameter x 4"
  • Works with 12-1/4" brake assembly
• Bolt pattern: 8 on 6-1/2"
• Wheel studs: 9/16" diameter x 1-5/16" long
• Grease cap flange diameter: 2.72"
• Weight capacity: 4,000 lbs
• Limited 1-year warranty

Bearing, Race, and Seal Information

• Bearings (included)
  • Inner bearing: 25580 (1.75" inner diameter)
  • Outer bearing: 02475 (1.25" inner diameter)
• Races (included)
  • Inner race: 25520
  • Outer race: 02420
• Grease seal (included): GS2250DL
  • Inner diameter: 2.25"
  • Outer diameter: 3.376"

Thoroughly Tested for Safety

This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.

E-Z Lube and Easy Grease-Compatible Assembly for Simple Lubrication

The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

• If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
• If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
• If D = 3", then the bolt pattern is 5 on 5"
• If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"

BD-86580-36 AxleTek 12-1/4" Hub and Drum Assembly for 8K Axle with Hardware - 8 on 6-1/2 - EZ Lube