Dexter Hydraulic Drum Brake Kit - Duo Servo - 12-1/4" - Left and Right Hand Assemblies - 9K/10K
(13 reviews)
Price: $842.77
Dexter Hydraulic Drum Brake Kit - Duo Servo - 12-1/4" - Left and Right Hand Assemblies - 9K/10K
Item # 23-410-411
Our Price: $842.77
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that are ready to ship
- All Info
- Reviews (13)
- Q & A (0)
- Photos
Dexter Trailer Brakes - 23-410-411
- Hydraulic Drum Brakes
- 9000 lbs Axle
- 10000 lbs Axle
- 12-1/4 x 3-3/8 Inch Drum
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Standard Grade
- Dual Servo
- Self Adjust
- Dexter
12-1/4" x 3-3/8" Driver's-side and passenger's-side hydraulic trailer brakes have a dual-plunger design. Mounting flanges have a 7-bolt pattern. Self-adjusting brakes require little maintenance. Fit 15" or larger wheels.
Features:
- Hydraulic drum brake assemblies are designed for use with a surge-type trailer brake actuator
- Dual-plunger design delivers same amount of braking when driving either forward or in reverse
- Self-adjusting brakes automatically adjust to deliver optimum performance and braking power
- No need for manual brake adjustments
- Proper adjustment leads to better brake efficiency and less wear on your tow vehicle's brakes
- Left-hand (driver's-side) brake assembly and right-hand (passenger's-side) brake assembly included
- Mounting bolts and hardware sold separately
Specs:
- Dimensions: 12-1/4" diameter x 3-3/8" wide
- Mounting flange bolt pattern: 7 bolt
- Wheel size: 15" or larger
- Axle rating: 9,000 - 10,000 lbs
23-410 Dexter 12-1/4" Duo-Servo Hydraulic Brake Assembly - LH - Self Adjust - 9K/10K
23-411 Dexter 12-1/4" Duo-Servo Hydraulic Brake Assembly - RH - Self Adjust - 9K/10K
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Dexter Hydraulic Drum Brake Kit - Duo Servo - 12-1/4" - Left and Right Hand Assemblies - 9K/10K - 23-410-411
Average Customer Rating: 4.7 out of 5 stars (13 Customer Reviews)
12-1/4" x 3-3/8" Driver's-side and passenger's-side hydraulic trailer brakes have a dual-plunger design. Mounting flanges have a 7-bolt pattern. Self-adjusting brakes require little maintenance. Fit 15" or larger wheels.by: Lowell 06/13/2023
always super fast shipping and helpful staff
by: Andrey 09/21/2021
After electric brakes this Hydraulic breaks works just super fine for moore then a one year electrical brakes i used to replace every 6 months!
by: Yves 05/19/2023
Very fast and easy to order.
by: Sharon09/05/2019
This was an easy buying experience. The sales representative was extremely helpful and very patient. I am not the end user for the items I purchased so I can not speak to that but, the service was excellent!
by: Hadley09/07/2022
by: Andy 10/23/2019
Very easy to do business with.
by: Eric 09/16/2022
by: Harry 12/20/2023
by: Ed12/21/2022
by: Yakov02/19/2021
by: Steven 07/11/2021
by: Kenny 02/09/2021
by: Roman 01/25/2021
13
13
See what our Experts say about this Dexter Trailer Brakes
- Recommended Brake Assemblies for 31 Foot Travel Trailer with Tandem AxlesFor axles that are roughly 5,000 lbs each base on your 10,000 lb rating, you will need 12 inch brake assemblies for your 31 foot travel trailer. I recommend the Electric Trailer Brake Kit - Self-Adjusting - 12" # AKEBRK-7-SA. If you have hydraulic brakes, you will want # AKFBBRK-7 instead which is a free-backing brake assembly. These assemblies both work with the standard 5 bolt mounting flange on axles of this capacity level. If you meant that each axle was rated for 10,000 lbs, then...
view full answer... - Parts Needed to Convert Trailer with 8k Electric Brakes to 8k Electric Over Hydraulic BrakesConverting from electric drum brakes to electric over hydraulic drum is pretty straight-forward. Basically you swap out the electric brake assemblies for hydaulic ones, you run hydraulic lines and then install an actuator and you'd be all set. For hydraulic brake assemblies you'd want the Dexter Hydraulic Drum Brake Set part # 23-410-411 which is a set that includes one passenger side assembly and one driver side. The actuator kit then to go with is the Hydrastar kit part # HBA-12 as...
view full answer... - Replacement Brake Assemblies for Dexter Trailer Hub 8-415I was able to cross reference the Dexter Hub/Drum 8-415 to the Dexter Trailer Hub Drum Assembly part # 8-430-5UC3 which should be an exact replacement. Which means for braking assemblies, the best option we have is the Dexter Brake Kit part # 23-450-451 or part # 23-410-411.
view full answer... - Replacement Brake Shoes and Assemblies For a Dexter 9,000LB General Duty AxleWe do carry the Dexter Electric Brake Kit # 23-450-451 which are self adjusting electric brakes for a 9K or 10K general duty axle. We do have the Right # BP04-255 and Left # BP04-245 12-1/4" X 3-3/8" replacement brake shoes for electric brake assemblies if you are only needing the shoes themselves. If you have the Dexter Hydraulic Drum Brake Kit # 23-410-411, we also have the Right # BP04-270 and Left # BP04-260 replacement shoes.
view full answer... - Can Dexter Trailer Hub # 008-399-93 Be Used with Drum Brakes The Dexter Trailer Hub # 008-399-93 that you referenced can only be used for disc brakes with the addition of an appropriately rated rotor assembly like # K71-635-00. For electric or hydraulic drum brakes a hub-and-drum assembly is needed instead. For an oil bath 8,000 pound hub-and-drum assembly that will fit the same spindle as the above option the Dexter # 8-285-10UC3-A will work perfectly. For the corresponding brake assemblies I recommend the Dexter Self-Adjusting # 23-450-451 for...
view full answer... - Replacement Brake Assemblies for Big Tex 22N TrailerI looked up your Big Tex 22N and was able to determine that it has 10k Dexter axles so for brake assemblies you'd wan the part # 23-410-411 for if you have hydraulic brakes or # 23-450-451 for electric and you'd be set.
view full answer... - Parts Needed to Convert Electric Brakes to Hydraulic Drum Brakes on Kaufman TrailerWe do have everything you need to convert the electric brakes on your trailer to hydraulic drum brake assemblies. I have attached a great article that will walk you through everything that is needed to make this conversion. For the brake assemblies themselves, we do have one kit available in the 12-1/4 x 3-3/8 size you are needing for 10,000 pound axles. The Dexter Hydraulic Drum Brake Kit # 23-410-411 includes both the Left Hand and RIght Hand assemblies and features a 7 bolt mounting...
view full answer... - Replacement Drum Brakes Assembly for 10,000 lb Dexter Axle We have drum brake assemblies for your 10K Dexter axles. If you want the electric assemblies, we have the Dexter Electric Brake Kit - Self-Adjusting - 12-1/4" - Left/Right Hand Assemblies - 9K to 10K # 23-450-451 if your hubs are 12-1/4 by 3-3/8 inches. If your hubs are the 4 inch width, then you will use the Dexter Electric Trailer Brake Kit # 23-438-439. If you have hydraulic brakes we have the following: # 23-410-411 for 12-1/4 x 3-3/8 inch drum # K23-524-00-2 for 12-1/4 x 3-1/2...
view full answer... - Replacement Brake Assemblies for Dexter 10,000 lb Trailer AxlesHow is the adjustment of the assemblies? Typically the problem you are having is due to the assemblies not being adjusted properly. Ideally they are tight enough that there's a light drag as you turn them by hand. To see how to manually adjust trailer brake assemblies check out the video I attached, fast-forward to the 4:35 mark of the video. Since we know you have 10k Dexter axles the correct brake assemblies are the part # 23-450-451 for if you have an electric brake setup or part...
view full answer... - Parts Needed To Convert Dexter 10000lb Axles To Electric Over Hydraulic Trailer BrakesI would be happy to recommend everything you will need to convert your Dexter 10000lb axles to electric over hydraulic drum brakes. Starting with the brakes you will need the Dexter Hydraulic Drum Brake Kit - Duo Servo - 12-1/4" - Left and Right Hand Assemblies - 9K/10K # 23-410-411. If your current mounting hardware is in bad shape you can use # BRKH122510 for new hardware. For brake lines I recommend the HydraStar Hydraulic Brake Line Kit - Tandem Axle - 25' Long, 3/16" Main Line #...
view full answer... - Correct Replacement for Dexter Hub/Drum 8-415I was able to cross reference the Dexter Hub/Drum 8-415 to the Dexter Trailer Hub Drum Assembly part # 8-430-5UC3 which should be an exact replacement. I don't have any depth measurements of the above/drum but what you would need to measure to confirm is the inside of the contact surface on the hub where the shoe rides and this should measure 12-1/4" x 3-3/8". If so, you should be good to go. In regards to braking assemblies, the best option we have is the Dexter Brake Kit part # 23-450-451...
view full answer... - Replacement Braking Assemblies for a 10,000 Lb Trailer AxleThe correct replacement braking assembly for your trailer should be either the Hayes/AL-KO Hydraulic Brake Kit part # K23-524-00-2 or the Dexter Hydraulic Drum Brake Kit part # 23-410-411. If you take a look for a tag on the center of the axle that should tell you the manufacturer and weight capacity. If not you would need to inspect the brake mounting flange and size of the assembly. The Dexter assembly uses a 7 bolt brake mounting flange and is 12-1/4" diameter x 3-3/8" wide (see photo...
view full answer...
Do you have a question about this Trailer Brake?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Updated by:
Wilson B
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
9/22/2022
I am sorry to see that you are unhappy with the part. Is there anything that I can do to help?